3/4 ton to 1/2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

old_truck1969 · 04-15-2002, 02:10 PM

My latest lead on parts for my '69 is from my next door neighbour! It turns out that his friend has a 72 gmc and is looking for parts. He was looking at my uncovered truck (no box or front clip) and wants my rear axle. His 72 is a half ton. Will the two rear ends interchange? I am hoping to switch from the trailing arms back. I don't need a 3/4 ton anyway. Also, what changes do i have to make to the front suspension?

------------------
69 GMC 3/4 ton camper special, will have a '71 front clip (very long term project)
86 GMC 3/4 ton (daily driver)
Thunder Bay, Ontario, Canada

djbonazz@hotmail.com

[This message has been edited by old_truck1969 (edited April 15, 2002).]

69 longhorn · 04-15-2002, 07:36 PM

The rear diffs should swap(both coil im guessing). The track bar,& frame brackets are different from 1/2 to 3/4,so you need to swap them also. On the front,to convert to 1/2 susp,you need to replace the lower a arms(use 71-72),& balljoints,& you can bolt the spindles on. Also go for the 71 up tierod assys,& you may have to change the center link(again 71 up). Good luck.....69 longhorn.

67Blacksheep · 04-16-2002, 08:27 PM

Old 69-
I'm in the process of the conversion right now. All the parts mentioned above need done. Even the frame mount for the tracking bar! They are different between the two. Early classic sells a real nice adjustable panhard bar, but the mount I suppose is purely a junk yard item. It is the only thing holding up my swap. Sucks to forget a part when you buy all the rest!!! Good luck

04-15-2002, 02:10 PM	#1
old_truck1969 Registered User Join Date: Mar 2001 Location: Thunder Bay, Ontario, Canada Posts: 202	3/4 ton to 1/2 My latest lead on parts for my '69 is from my next door neighbour! It turns out that his friend has a 72 gmc and is looking for parts. He was looking at my uncovered truck (no box or front clip) and wants my rear axle. His 72 is a half ton. Will the two rear ends interchange? I am hoping to switch from the trailing arms back. I don't need a 3/4 ton anyway. Also, what changes do i have to make to the front suspension? ------------------ 69 GMC 3/4 ton camper special, will have a '71 front clip (very long term project) 86 GMC 3/4 ton (daily driver) Thunder Bay, Ontario, Canada djbonazz@hotmail.com [This message has been edited by old_truck1969 (edited April 15, 2002).] __________________ "All Corvettes are red. The rest are mistakes." - John Heinricy

04-15-2002, 07:36 PM	#2
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	The rear diffs should swap(both coil im guessing). The track bar,& frame brackets are different from 1/2 to 3/4,so you need to swap them also. On the front,to convert to 1/2 susp,you need to replace the lower a arms(use 71-72),& balljoints,& you can bolt the spindles on. Also go for the 71 up tierod assys,& you may have to change the center link(again 71 up). Good luck.....69 longhorn. __________________ http://community.webshots.com/user/hotrodhorn

04-16-2002, 08:27 PM	#3
67Blacksheep Registered User Join Date: Mar 2002 Location: Ohio Posts: 135	Old 69- I'm in the process of the conversion right now. All the parts mentioned above need done. Even the frame mount for the tracking bar! They are different between the two. Early classic sells a real nice adjustable panhard bar, but the mount I suppose is purely a junk yard item. It is the only thing holding up my swap. Sucks to forget a part when you buy all the rest!!! Good luck __________________ '94 GMC Seirra Ext. Cab '67 Formula Firebird '89 GSX-R 750



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.