Firewall in Cab Seals? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Striker169 · 07-08-2005, 11:44 AM

Ok so there are some seals that looked like they are just cawked up or somethign they run above the vents on the kick pannels and along under the windsheild but on like the other side of the metal. I will take some pics today if no one knows what I am talking about but on my cab it looks like the seals are starting to fall off is there a certian type of cawk I should use to re-seal them?

Striker169 · 07-08-2005, 11:47 AM

Well I already had a pic this is where it is above the vent by the EBrake

**john** · 07-08-2005, 02:26 PM

Here is a lot of seam sealers to chose from. Use a paintable one. John

http://www.autopaintersupply.com/Mer...egory_Code=3BS

Striker169 · 07-08-2005, 03:06 PM

Any recomendation on which one to use?

Green Machine · 07-09-2005, 12:41 AM

I'd be pulling the cowl and have a look under there, rust may starting on top.

07-08-2005, 11:44 AM	#1
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Firewall in Cab Seals? Ok so there are some seals that looked like they are just cawked up or somethign they run above the vents on the kick pannels and along under the windsheild but on like the other side of the metal. I will take some pics today if no one knows what I am talking about but on my cab it looks like the seals are starting to fall off is there a certian type of cawk I should use to re-seal them?

07-08-2005, 11:47 AM	#2
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Well I already had a pic this is where it is above the vent by the EBrake Last edited by Striker169; 07-08-2005 at 11:47 AM.

07-08-2005, 02:26 PM	#3
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Here is a lot of seam sealers to chose from. Use a paintable one. John http://www.autopaintersupply.com/Mer...egory_Code=3BS __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

07-09-2005, 12:41 AM	#5
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	I'd be pulling the cowl and have a look under there, rust may starting on top. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

07-08-2005, 03:06 PM	#4
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Any recomendation on which one to use?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.