70 A/C cab f/s in TX - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GROUCH · 06-29-2005, 08:56 PM

I have a 70 CST A/C cab here in Abilene TX. It is mostly stripped of parts and will needs cab corners and rockers. The floor is in great condition. I have not found any other rust. $400.00 and its yours. For $500.00 I will include the new cab corners and rockers for you to install. There is a kicker, its still on the frame and it has to go with it. It has a good rear end that has been converted from 6 lug to 5 lug using 71 axles with new bearings and seals. This is a leaf spring truck. Front end has been converted using an 83 Chevy truck front end. Wheels and tires are good and it rolls freely and I have the fuel tank for this vehicle along with the drivers door. I have a clear title to this vehicle. I will send pictures if you so desire. I can be contacted by phone at 325-370-0071.

RicksTrucks · 06-29-2005, 09:07 PM

Long or short? Send pics to rlcrockett@aol.com

GROUCH · 06-29-2005, 09:35 PM

OOPS! I forgot to mention that it is a long bed. I am going out to take pictures now and will send tomorrow.

GROUCH · 06-30-2005, 11:04 AM

Also forgot to mention I have a good fleet tailgate that goes with this.

GROUCH · 07-01-2005, 09:04 AM

Have other pics if needed

TN70C10 · 07-02-2005, 03:28 AM

exactly what im looking for have no way to pick it up though.

GROUCH · 07-04-2005, 08:50 AM

bump

55454 · 07-04-2005, 09:20 AM

Is it a five lug, do you ever go to Houston? I noticed it said five lug.

Thanks Tommy

GROUCH · 07-04-2005, 10:28 AM

It is 5 lug now. I converted it using 71 axles to match up with the 83 front end. Note also that it is leaf springs, not coils. This was originally a big block(402) truck. I also still have the original 70 drum front end that can go with this truck if needed.
Sorry, I never make it down to Houston.

GROUCH · 07-06-2005, 09:47 PM

Okay,
How about 400.00 for all.

tomatocity · 07-07-2005, 01:51 AM

Quote:

Originally Posted by GROUCH

Have other pics if needed

What is the deal with the tailgate? I need a CHEVROLET tailgate ro replace the GMC tailgate on my truck.

HuggerCST · 07-07-2005, 09:55 AM

I'm interested. Could I get a few more pics? How's the inside of the tailgate, and is it bowed? I'd like to see some pics of the kickpanels, drip rails, & cowl area of the cab if possible. Are you interested in trades? You can send the pics to awriser@yahoo.com. Thanks

GROUCH · 07-07-2005, 06:08 PM

E-mail sent. Let me know if thats what you need

55454 · 07-07-2005, 07:27 PM

If you can help Huggercst, you will have made a good friend, he has helped me a lot, and does not mind helping out, I am not trying to suck up, but he does what he says.

p.s. If he tells you Abilene is only an hour from his house dont believe him. Ha Ha

Tommy

GROUCH · 07-09-2005, 03:39 PM

Hugger
I sent you some more pics. Did you recieve them?

GROUCH · 07-10-2005, 08:29 AM

Huggercst
Tried again

Jakes-66-K10 · 07-10-2005, 10:08 AM

Sounds like tomatocity is first in line for the tailgate. I'm interested too.

06-29-2005, 08:56 PM	#1
GROUCH Registered User Join Date: Aug 2004 Location: Abilene Tx Posts: 39	70 A/C cab f/s in TX I have a 70 CST A/C cab here in Abilene TX. It is mostly stripped of parts and will needs cab corners and rockers. The floor is in great condition. I have not found any other rust. $400.00 and its yours. For $500.00 I will include the new cab corners and rockers for you to install. There is a kicker, its still on the frame and it has to go with it. It has a good rear end that has been converted from 6 lug to 5 lug using 71 axles with new bearings and seals. This is a leaf spring truck. Front end has been converted using an 83 Chevy truck front end. Wheels and tires are good and it rolls freely and I have the fuel tank for this vehicle along with the drivers door. I have a clear title to this vehicle. I will send pictures if you so desire. I can be contacted by phone at 325-370-0071.

06-29-2005, 09:07 PM	#2
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Long or short? Send pics to rlcrockett@aol.com __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

07-01-2005, 09:04 AM	#5
GROUCH Registered User Join Date: Aug 2004 Location: Abilene Tx Posts: 39	70 A/C cab f/s in TX Have other pics if needed Attached Images

07-04-2005, 09:20 AM	#8
55454 55454 Join Date: Mar 2005 Location: Lafayette La. Posts: 340	Is it a five lug, do you ever go to Houston? I noticed it said five lug. Thanks Tommy Last edited by 55454; 07-04-2005 at 09:27 AM. Reason: missing info

07-07-2005, 09:55 AM	#12
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I'm interested. Could I get a few more pics? How's the inside of the tailgate, and is it bowed? I'd like to see some pics of the kickpanels, drip rails, & cowl area of the cab if possible. Are you interested in trades? You can send the pics to awriser@yahoo.com. Thanks __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 07-07-2005 at 09:57 AM.

06-29-2005, 09:35 PM	#3
GROUCH Registered User Join Date: Aug 2004 Location: Abilene Tx Posts: 39	OOPS! I forgot to mention that it is a long bed. I am going out to take pictures now and will send tomorrow.

06-30-2005, 11:04 AM	#4
GROUCH Registered User Join Date: Aug 2004 Location: Abilene Tx Posts: 39	Also forgot to mention I have a good fleet tailgate that goes with this.

07-02-2005, 03:28 AM	#6
TN70C10 Registered User Join Date: Jun 2005 Location: Chattanooga TN Posts: 115	exactly what im looking for have no way to pick it up though.

07-04-2005, 08:50 AM	#7
GROUCH Registered User Join Date: Aug 2004 Location: Abilene Tx Posts: 39	bump

07-04-2005, 10:28 AM	#9
GROUCH Registered User Join Date: Aug 2004 Location: Abilene Tx Posts: 39	It is 5 lug now. I converted it using 71 axles to match up with the 83 front end. Note also that it is leaf springs, not coils. This was originally a big block(402) truck. I also still have the original 70 drum front end that can go with this truck if needed. Sorry, I never make it down to Houston.

07-06-2005, 09:47 PM	#10
GROUCH Registered User Join Date: Aug 2004 Location: Abilene Tx Posts: 39	Okay, How about 400.00 for all.

07-07-2005, 06:08 PM	#13
GROUCH Registered User Join Date: Aug 2004 Location: Abilene Tx Posts: 39	E-mail sent. Let me know if thats what you need

07-07-2005, 07:27 PM	#14
55454 55454 Join Date: Mar 2005 Location: Lafayette La. Posts: 340	If you can help Huggercst, you will have made a good friend, he has helped me a lot, and does not mind helping out, I am not trying to suck up, but he does what he says. p.s. If he tells you Abilene is only an hour from his house dont believe him. Ha Ha Tommy

07-09-2005, 03:39 PM	#15
GROUCH Registered User Join Date: Aug 2004 Location: Abilene Tx Posts: 39	Hugger I sent you some more pics. Did you recieve them?

07-10-2005, 08:29 AM	#16
GROUCH Registered User Join Date: Aug 2004 Location: Abilene Tx Posts: 39	Huggercst Tried again



Register or Log In To remove these advertisements.

07-10-2005, 10:08 AM	#17
Jakes-66-K10 Registered User Join Date: Aug 2004 Location: Idaho Posts: 640	Sounds like tomatocity is first in line for the tailgate. I'm interested too.

Register or Log In To remove these advertisements.