WTB K5 Front fender Emblems 81 -87 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TC70C10 · 06-14-2005, 08:35 AM

Looking for a good set of front fender emblems.

TC70C10 · 06-29-2005, 07:37 AM

K5 Blazer Emblems for front Fender 81 -87

I like the older 73-80 emblems but I'm not sure how'd they'd fit

TC70C10 · 07-11-2005, 01:02 PM

No luck finding any back in Pennsylvania last week. Still looking.

Tom's 68 conv · 07-11-2005, 07:46 PM

I've got a set
I will go snap some pics

Tom's 68 conv · 07-11-2005, 07:51 PM

here is a pic of the worse one

TC70C10 · 07-12-2005, 08:19 AM

How much do you want for the set? Shipping to 35749. Harvest AL.

I was in Hermitage PA last week.

Can you get them off in without breaking? I initially pryed mine off with two screwdrivers.

Let me know what you think.

Thanks,
Tim

Tom's 68 conv · 07-12-2005, 03:32 PM

let me go see how they come off
if they don't break - how does 25.00 sound with the shipping included

TC70C10 · 07-12-2005, 03:56 PM

Sounds fair. I guess you can get at the caps/nuts if you remove the fender but that's alot of work. The two skinny long screwdrivers worked out for me. Mine emblems broke when the idiot painter did a half a$$ job putting them back on with 3M tape. I tried to take them off to reattach and they came off in pieces. That stuff is really strong.

Let me know how it goes and if there's anything I can get for you.

Tim

TC70C10 · 07-12-2005, 03:57 PM

BTW, I think the nuts/caps are behind the BL and the ER of Blazer and I think the posts are nylon or plastic.

Tom's 68 conv · 07-12-2005, 07:46 PM

I was busy on the rear of the blazer today
but tomorrow I will finish stripping the front end and the fenders will be coming off anyway
so it won't be a problem getting to the nuts
I will post back as soon as they are off to let you know how it went
wish me luck

TC70C10 · 07-13-2005, 09:06 AM

You doing a paint job or parting it out??

Tom's 68 conv · 07-13-2005, 04:29 PM

Quote:

Originally Posted by TC70C10

You doing a paint job or parting it out??

parting it out
also the one had studs and came out good
but, the other is missing the studs and is attached with adhesive
if you are still interested I will try to remove it
but let me know
I am not even gonna try if you don't want that one

TC70C10 · 07-13-2005, 04:36 PM

It's up to you, I'm going to have to use adhesive to put them back on.

If you want to give it a shot that's great. If not, I'll take the one you got if you're willing to sell it.

Tim

Tom's 68 conv · 07-13-2005, 04:45 PM

sure it's yours
I will go try to remove the other one and let you know how it goes

TC70C10 · 07-13-2005, 04:48 PM

One's better than none..

Tom's 68 conv · 07-13-2005, 05:11 PM

got 'em

Tom's 68 conv · 07-13-2005, 05:16 PM

E-mail your address and I will return my address

TC70C10 · 07-18-2005, 02:27 PM

Tim Cameron
27810 Kim Drive
Harvest, AL 35749

Tom's 68 conv · 07-18-2005, 08:27 PM

Quote:

Originally Posted by TC70C10

Tim Cameron
27810 Kim Drive
Harvest, AL 35749

Thomas M. Schilling
5164 Jasper Rd.
Emmaus, PA 18049

will ship them out this week via ups

TC70C10 · 07-19-2005, 08:02 AM

I'll get a check out in the mail today.

Thanks Thomas,

Tim

Tom's 68 conv · 07-19-2005, 06:24 PM

I sent them out via ups today
you should have them by friday

thanks

ozrulzk5 · 07-20-2005, 07:57 PM

Hey tim I had the same trouble cause some A hole wanted mine in a parking lot. talk about pissed off, anyway they ended up with broke ones serves them right. I found some speed nuts at the parts house after I got some new ones from lmc and the nut slides into the hole and you push the post from the emblem thru it. Works great dont have to take the fenders off later if you want to remove them with the two screwdriver method plus they dont rattle.Anyway thought you might like a little time saver and less frustration Good luck!!!!

TC70C10 · 07-21-2005, 09:23 AM

Good info. Sorry to hear about the thieves. People amaze me sometimes

Tom's 68 conv · 07-28-2005, 08:04 PM

received the money order today
thank you

06-14-2005, 08:35 AM	#1
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	WTB K5 Front fender Emblems 81 -87 Looking for a good set of front fender emblems. __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749

06-29-2005, 07:37 AM	#2
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	K5 Blazer Emblems for front Fender 81 -87 I like the older 73-80 emblems but I'm not sure how'd they'd fit __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749

07-11-2005, 01:02 PM	#3
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	No luck finding any back in Pennsylvania last week. Still looking. __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749

07-12-2005, 08:19 AM	#6
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	How much do you want for the set? Shipping to 35749. Harvest AL. I was in Hermitage PA last week. Can you get them off in without breaking? I initially pryed mine off with two screwdrivers. Let me know what you think. Thanks, Tim __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749

07-12-2005, 03:56 PM	#8
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	Sounds fair. I guess you can get at the caps/nuts if you remove the fender but that's alot of work. The two skinny long screwdrivers worked out for me. Mine emblems broke when the idiot painter did a half a$$ job putting them back on with 3M tape. I tried to take them off to reattach and they came off in pieces. That stuff is really strong. Let me know how it goes and if there's anything I can get for you. Tim __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749

07-11-2005, 07:46 PM	#4
Tom's 68 conv chevy junkie Join Date: Jul 2005 Location: Vera Cruz, PA Posts: 184	I've got a set I will go snap some pics

07-11-2005, 07:51 PM	#5
Tom's 68 conv chevy junkie Join Date: Jul 2005 Location: Vera Cruz, PA Posts: 184	here is a pic of the worse one

07-12-2005, 03:32 PM	#7
Tom's 68 conv chevy junkie Join Date: Jul 2005 Location: Vera Cruz, PA Posts: 184	let me go see how they come off if they don't break - how does 25.00 sound with the shipping included

07-12-2005, 03:57 PM	#9
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	BTW, I think the nuts/caps are behind the BL and the ER of Blazer and I think the posts are nylon or plastic. __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749

07-12-2005, 07:46 PM	#10
Tom's 68 conv chevy junkie Join Date: Jul 2005 Location: Vera Cruz, PA Posts: 184	I was busy on the rear of the blazer today but tomorrow I will finish stripping the front end and the fenders will be coming off anyway so it won't be a problem getting to the nuts I will post back as soon as they are off to let you know how it went wish me luck

07-13-2005, 09:06 AM	#11
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	You doing a paint job or parting it out?? __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749

07-13-2005, 04:36 PM	#13
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	It's up to you, I'm going to have to use adhesive to put them back on. If you want to give it a shot that's great. If not, I'll take the one you got if you're willing to sell it. Tim __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749

07-13-2005, 04:45 PM	#14
Tom's 68 conv chevy junkie Join Date: Jul 2005 Location: Vera Cruz, PA Posts: 184	sure it's yours I will go try to remove the other one and let you know how it goes

07-13-2005, 04:48 PM	#15
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	One's better than none.. __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749

07-13-2005, 05:11 PM	#16
Tom's 68 conv chevy junkie Join Date: Jul 2005 Location: Vera Cruz, PA Posts: 184	got 'em



Register or Log In To remove these advertisements.

07-13-2005, 05:16 PM	#17
Tom's 68 conv chevy junkie Join Date: Jul 2005 Location: Vera Cruz, PA Posts: 184	E-mail your address and I will return my address

07-18-2005, 02:27 PM	#18
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	Tim Cameron 27810 Kim Drive Harvest, AL 35749 __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749

07-19-2005, 08:02 AM	#20
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	I'll get a check out in the mail today. Thanks Thomas, Tim __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749

07-19-2005, 06:24 PM	#21
Tom's 68 conv chevy junkie Join Date: Jul 2005 Location: Vera Cruz, PA Posts: 184	I sent them out via ups today you should have them by friday thanks

07-20-2005, 07:57 PM	#22
ozrulzk5 What can I do next ???? Join Date: Jan 2005 Location: Birmingham, Alabama 35126 Posts: 59	Emblem Hey tim I had the same trouble cause some A hole wanted mine in a parking lot. talk about pissed off, anyway they ended up with broke ones serves them right. I found some speed nuts at the parts house after I got some new ones from lmc and the nut slides into the hole and you push the post from the emblem thru it. Works great dont have to take the fenders off later if you want to remove them with the two screwdriver method plus they dont rattle.Anyway thought you might like a little time saver and less frustration Good luck!!!!

07-21-2005, 09:23 AM	#23
TC70C10 Registered User Join Date: Nov 2001 Location: Harvest, AL 35749 Posts: 337	Thanks Good info. Sorry to hear about the thieves. People amaze me sometimes __________________ 1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749

07-28-2005, 08:04 PM	#24
Tom's 68 conv chevy junkie Join Date: Jul 2005 Location: Vera Cruz, PA Posts: 184	received the money order today thank you

Register or Log In To remove these advertisements.