Heat stove for small block - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Don Smith · 07-07-2005, 10:48 PM

WTB Heat Stove for small block.

Don Smith · 07-08-2005, 09:17 PM

Ttt

67_C-30 · 07-09-2005, 12:13 AM

I have this one off a '69 C-10. It is in excellent shape, and has what I beileve to be the original paint on it. I would let it go for $25 to your door.

Roberty · 07-09-2005, 12:33 AM

The Heat Stove is the metal shroud that goes around the original exhaust manifold. That's the heat stove riser tube that you show in the picture. He might be needing both though.

Don Smith · 07-10-2005, 05:25 PM

67C-30, Thanks for reply but I need the part in Roberty's post.

knsmodels · 07-13-2005, 12:40 AM

Don....I have a complete set up of the heat stove to the air cleaner.....pipe is the short pipe (not long reach).....the stove itself has some very thin areas also some metal gone around the exhaust bolt (see arrows)....The stove looks fine on the truck you really cant see the rusted area once in place....I had it on my truck and it fit securely....the pc behind the manifold is in really good shape and holds it in place quite well......comes with bolt for exhaust manifold.....it is not perfect but better than nothing.....$30 shipped if you want it.....Paul

PS stove is shiney as I had painted it with cadmium paint

Don Smith · 07-13-2005, 10:02 PM

knsmodels, thanks for the reply but I think I will continue to search .

07-07-2005, 10:48 PM	#1
Don Smith Registered User Join Date: Jul 2000 Location: Hampton, Ga, USA Posts: 217	Heat stove for small block WTB Heat Stove for small block. __________________ 68 Short Stepside, 350, quadrajet, 700r4, 3:73 posi, power front discs, HEI, Factory Air, Tilt, Tach, accelerator cable instead of rod, sway bar. 96 Impala SS 97 Monte Carlo

07-08-2005, 09:17 PM	#2
Don Smith Registered User Join Date: Jul 2000 Location: Hampton, Ga, USA Posts: 217	Ttt __________________ 68 Short Stepside, 350, quadrajet, 700r4, 3:73 posi, power front discs, HEI, Factory Air, Tilt, Tach, accelerator cable instead of rod, sway bar. 96 Impala SS 97 Monte Carlo

07-09-2005, 12:13 AM	#3
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	I have this one off a '69 C-10. It is in excellent shape, and has what I beileve to be the original paint on it. I would let it go for $25 to your door. Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

07-09-2005, 12:33 AM	#4
Roberty Hot Damn - Here I Am!! Join Date: Feb 2000 Location: Ringgold, Georgia Posts: 726	The Heat Stove is the metal shroud that goes around the original exhaust manifold. That's the heat stove riser tube that you show in the picture. He might be needing both though. __________________ My vehicles: '90 Silverado Sport '71 Chevelle SS Convertible '70 C-10 - My Grandfather bought it new - original un-restored

07-10-2005, 05:25 PM	#5
Don Smith Registered User Join Date: Jul 2000 Location: Hampton, Ga, USA Posts: 217	67C-30, Thanks for reply but I need the part in Roberty's post. __________________ 68 Short Stepside, 350, quadrajet, 700r4, 3:73 posi, power front discs, HEI, Factory Air, Tilt, Tach, accelerator cable instead of rod, sway bar. 96 Impala SS 97 Monte Carlo

07-13-2005, 12:40 AM	#6
knsmodels I make Models Join Date: May 2005 Location: Bucks, PA Posts: 626	Don....I have a complete set up of the heat stove to the air cleaner.....pipe is the short pipe (not long reach).....the stove itself has some very thin areas also some metal gone around the exhaust bolt (see arrows)....The stove looks fine on the truck you really cant see the rusted area once in place....I had it on my truck and it fit securely....the pc behind the manifold is in really good shape and holds it in place quite well......comes with bolt for exhaust manifold.....it is not perfect but better than nothing.....$30 shipped if you want it.....Paul PS stove is shiney as I had painted it with cadmium paint __________________ Click to see what I do 1972 LWB K10 350/4 sp 1968 SS Chevelle 396/tremac5spd

07-13-2005, 10:02 PM	#7
Don Smith Registered User Join Date: Jul 2000 Location: Hampton, Ga, USA Posts: 217	knsmodels, thanks for the reply but I think I will continue to search . __________________ 68 Short Stepside, 350, quadrajet, 700r4, 3:73 posi, power front discs, HEI, Factory Air, Tilt, Tach, accelerator cable instead of rod, sway bar. 96 Impala SS 97 Monte Carlo



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.