'70 Long Fleetside Bed 4 parts, patch panels. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71 shortbedfleetside · 07-05-2005, 01:52 AM

I have a 1970 Long Fleetside bed that I can cut up for patch panels also.
Located in Simi Valley, Ca. 93065

getufit2day@dslextreme.com Robert

**Hart_Rod** · 07-05-2005, 02:28 AM

Are the ends of the bed good, where tail light and backup light go? I need about a foot back both sides. Do you have pics?

Rob

**hilljob26** · 07-05-2005, 08:00 PM

anyway i could get 2 12"x12" squares that are good and straight w/ no rust,and also a support bar that runs from the quarter panel to the floor,preferably the drivers side,not sure if they are different or not,let me know a price shipped to 67401,please pm me w/ that info.thanx...mike

71 shortbedfleetside · 07-05-2005, 08:38 PM

ok I got my camera figured out. go to UPS.com and you can get an idea what shipping would be. I'm in 93065.

sdkid · 07-06-2005, 12:26 AM

I need lower rear box corners. Like from the taillight down. I can get a pic of what i need,if you need me too.

71 shortbedfleetside · 07-06-2005, 01:46 AM

Yeah I got 'em. Never heard back from HART ROB or HILLJOB so it's still up for grabs.
PM me a pic of what you need.

knsmodels · 07-06-2005, 02:14 PM

If you dont hear back from hill.....I would be interested in the braces on the bottom of the bed that go from the quarter in front of the wheel opening to the bracing under the bed....need them both to 19007....Thanks...Paul

71 shortbedfleetside · 07-06-2005, 07:41 PM

nobody has given a definate answer so everything is still up for grabs.

**Hart_Rod** · 07-06-2005, 08:48 PM

Do you have an idea how much the pieces I asked for will weigh? I'm not sure what shipping will be, so it's kinda hard to make a decsion.

Rob

sdkid · 07-07-2005, 12:22 AM

Here is the piece I need, both sides. You could cut along the holes for the trim if needed. As rob said,I would need the weight to check the shipping.

sdkid · 07-07-2005, 12:23 AM

Here is the piece I need, both sides. You could cut along the holes for the trim if needed. As rob said,I would need the weight to check the shipping. And If rob needs this area also, he has dibs,as he asked before me.

knsmodels · 07-08-2005, 10:30 AM

pm sent.....need price and shipping to 19007....Thanks

Jesse72 · 07-08-2005, 02:00 PM

could you email me a price shipped to ohio on the marker lights on the sides and about 6in all the way around them, i need both sides to put into my 67 bed. I dont think shipping would be much. Crazyracer31r@aol.com

71 shortbedfleetside · 07-08-2005, 10:01 PM

If you go to UPS.com you can get an idea of what shipping would be just as well as I can.

Jesse72 · 07-09-2005, 06:10 PM

i need a price on the pannels, are the light holes in good shape?

71 shortbedfleetside · 07-09-2005, 06:36 PM

yes they are, I need to know what part you need and how much area.

getufit2day@dslextreme.com

Robert

71 shortbedfleetside · 07-10-2005, 11:57 PM

goin' to the boneyard soon. better act fast.

71 shortbedfleetside · 07-11-2005, 01:04 AM

bump

71 shortbedfleetside · 07-11-2005, 10:51 AM

Boneyard

71 shortbedfleetside · 07-11-2005, 06:52 PM

going? going?.................

71 shortbedfleetside · 07-12-2005, 01:29 AM

anyone? anyone?

71 shortbedfleetside · 07-12-2005, 07:53 PM

ok fine. it's a 4 whl dr. and it's going in the trash.

71 shortbedfleetside · 07-15-2005, 03:42 AM

OK THE TRUCK IS GONE TO THE BONEYARD BUT I STILL HAVE THIS BED THAT i CAN CUT UP FOR PATCH PANELS. MAKE ME AN OFFER.

71 shortbedfleetside · 07-16-2005, 03:31 AM

bump

07-05-2005, 01:52 AM	#1
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	'70 Long Fleetside Bed 4 parts, patch panels. I have a 1970 Long Fleetside bed that I can cut up for patch panels also. Located in Simi Valley, Ca. 93065 getufit2day@dslextreme.com Robert

07-05-2005, 02:28 AM	#2
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Are the ends of the bed good, where tail light and backup light go? I need about a foot back both sides. Do you have pics? Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-05-2005, 08:00 PM	#3
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	anyway i could get 2 12"x12" squares that are good and straight w/ no rust,and also a support bar that runs from the quarter panel to the floor,preferably the drivers side,not sure if they are different or not,let me know a price shipped to 67401,please pm me w/ that info.thanx...mike __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

07-06-2005, 12:26 AM	#5
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	I need lower rear box corners. Like from the taillight down. I can get a pic of what i need,if you need me too. __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster

07-06-2005, 02:14 PM	#7
knsmodels I make Models Join Date: May 2005 Location: Bucks, PA Posts: 626	If you dont hear back from hill.....I would be interested in the braces on the bottom of the bed that go from the quarter in front of the wheel opening to the bracing under the bed....need them both to 19007....Thanks...Paul __________________ Click to see what I do 1972 LWB K10 350/4 sp 1968 SS Chevelle 396/tremac5spd

07-05-2005, 08:38 PM	#4
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	ok I got my camera figured out. go to UPS.com and you can get an idea what shipping would be. I'm in 93065.

07-06-2005, 01:46 AM	#6
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	Yeah I got 'em. Never heard back from HART ROB or HILLJOB so it's still up for grabs. PM me a pic of what you need.

07-06-2005, 07:41 PM	#8
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	nobody has given a definate answer so everything is still up for grabs.

07-06-2005, 08:48 PM	#9
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Do you have an idea how much the pieces I asked for will weigh? I'm not sure what shipping will be, so it's kinda hard to make a decsion. Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-07-2005, 12:22 AM	#10
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Here is the piece I need, both sides. You could cut along the holes for the trim if needed. As rob said,I would need the weight to check the shipping. __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster

07-07-2005, 12:23 AM	#11
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Here is the piece I need, both sides. You could cut along the holes for the trim if needed. As rob said,I would need the weight to check the shipping. And If rob needs this area also, he has dibs,as he asked before me. __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster Last edited by sdkid; 07-07-2005 at 12:24 AM.

07-08-2005, 10:30 AM	#12
knsmodels I make Models Join Date: May 2005 Location: Bucks, PA Posts: 626	pm sent.....need price and shipping to 19007....Thanks __________________ Click to see what I do 1972 LWB K10 350/4 sp 1968 SS Chevelle 396/tremac5spd

07-08-2005, 02:00 PM	#13
Jesse72 Registered User Join Date: Jan 2005 Location: Ohio Posts: 171	could you email me a price shipped to ohio on the marker lights on the sides and about 6in all the way around them, i need both sides to put into my 67 bed. I dont think shipping would be much. Crazyracer31r@aol.com __________________ Jesse 72 4x4 Sold 59 GMC air ride ls swap

07-08-2005, 10:01 PM	#14
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	If you go to UPS.com you can get an idea of what shipping would be just as well as I can.

07-09-2005, 06:10 PM	#15
Jesse72 Registered User Join Date: Jan 2005 Location: Ohio Posts: 171	i need a price on the pannels, are the light holes in good shape? __________________ Jesse 72 4x4 Sold 59 GMC air ride ls swap



Register or Log In To remove these advertisements.

07-09-2005, 06:36 PM	#16
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	yes they are, I need to know what part you need and how much area. getufit2day@dslextreme.com Robert

07-10-2005, 11:57 PM	#17
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	goin' to the boneyard soon. better act fast.

07-11-2005, 01:04 AM	#18
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	bump

07-11-2005, 10:51 AM	#19
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	Boneyard

07-11-2005, 06:52 PM	#20
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	going? going?.................

07-12-2005, 01:29 AM	#21
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	anyone? anyone?

07-12-2005, 07:53 PM	#22
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	ok fine. it's a 4 whl dr. and it's going in the trash.

07-15-2005, 03:42 AM	#23
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	OK THE TRUCK IS GONE TO THE BONEYARD BUT I STILL HAVE THIS BED THAT i CAN CUT UP FOR PATCH PANELS. MAKE ME AN OFFER.

07-16-2005, 03:31 AM	#24
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	bump

Register or Log In To remove these advertisements.