|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-15-2005, 02:51 PM
|
#1 |
|
Senior Member
 
Join Date: Dec 2003
Location: Pampa, Texas
Posts: 1,553
|
Who's got the cheapest price?
I need a new wiring harness for the truck. What prices have you guys seen on the painless kits? who has the cheapest price? Any good/bad experiences with the painless kit?
just curious Rick
__________________
https://www.ebay.com/itm/29620574751...mis&media=COPY Last edited by '70_402; 07-15-2005 at 02:51 PM. |
|
|
|
07-15-2005, 03:16 PM
|
#2 |
|
Car O'Holic
Join Date: Jan 2005
Location: Austin, Tx.
Posts: 692
|
I looked around becuase I just did this and I found that jegs was acctually faily cheap
|
|
|
|
|
07-16-2005, 04:29 AM
|
#3 |
|
Registered User
Join Date: Nov 2002
Location: Kelowna B.C. Canada
Posts: 1,086
|
Rick, from all the threads I've read the painless kits are pretty good. I was lucky and most of my wiring harnesses were in great shape (no hack jobs). I did replace a couple of the smaller harnesses and found them at the wreckers, I inspected them really well by eye and checked continuity with my multi-meter on each wire... and they were very inexspensive. Doug
|
|
|
|
|
07-16-2005, 06:54 AM
|
#4 |
|
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
I did some reading on Painless also and they seem to be good, although not original in looks. I just got a engine harness from MotherTruckers just the other week, and he has the best prices i've found on original wiring. The harness is all original in looks, and fits like a glove. I'm most likely going to get the headlight harness later on. My under dash one is in great shape. Don't need to replace that.
__________________
1997 GMC Sierra Ext 1965 Mustang |
|
|
|
|
07-16-2005, 11:42 AM
|
#5 |
|
Registered User
Join Date: Sep 2003
Location: Arizona
Posts: 305
|
M&H wiring is by far the best for originality and fit. A lot of the vendors carry those at a good price.
|
|
|
|
|
07-16-2005, 11:52 AM
|
#6 |
|
Registered User
Join Date: Mar 2004
Location: Virginia beach, Va
Posts: 209
|
painless, definatley. one because there price is the lowest. and two if you go with jegs, you will get what you pay for. plus if you have any questions I definatley know of 4 people that have completed a painless wiring harness setup. so any questions can be answered.
__________________
~Christopher L. Orr 71 c20, 454- Stolen While Deployed. dynoed at 550 ft lbs, 425 hp at 3000 rpm (mustang dyno). TH400 3500 stall.... etc, etc. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
