Power Steering Bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972ChevyCheyenne · 07-19-2005, 11:36 AM

1972 Chevy LWB with a 350 engine. I am missing the part of the power steering bracket the bolt to the motor mount. Just wondering what other cars/trucks/vans and what years used them. Thanks Jamie

tomatocity · 07-19-2005, 03:00 PM

I will send pics tonight after I remove mine.

1972ChevyCheyenne · 07-19-2005, 03:08 PM

Tomatocity

I got a good idea what it looks like, but wrecking yards do have anything 67-72 trucks around. So I need to know what other vehicle I might be able to get them off. Jamie

70GMCer · 07-19-2005, 04:51 PM

They are repro'd from "The Truck Shop" in California. I just got mine the other week. They sell the kit. You get the saddle bracket and the bracket that bolts to the mtr mount. I think it was $39.00 for the set.......

Sweet72 · 07-19-2005, 05:00 PM

If you're talking about the cast iron piece...I got mine off a 80's van with SB v8. Wish I could be more specific as far as years these were used.

gr8scott51 · 07-19-2005, 05:14 PM

I bought new stuff from www.alangrovecomponents.com that let me mount the alternator lower on the block.

Tx Firefighter · 07-19-2005, 07:04 PM

There are actually 2 kinds used on 67-72 trucks. I clicked a picture of each.

07-19-2005, 11:36 AM	#1
1972ChevyCheyenne Registered User Join Date: Sep 2004 Location: Teeswater, Ontario, Canada Posts: 173	Power Steering Bracket 1972 Chevy LWB with a 350 engine. I am missing the part of the power steering bracket the bolt to the motor mount. Just wondering what other cars/trucks/vans and what years used them. Thanks Jamie

07-19-2005, 03:00 PM	#2
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	I will send pics tonight after I remove mine. __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.

07-19-2005, 04:51 PM	#4
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	They are repro'd from "The Truck Shop" in California. I just got mine the other week. They sell the kit. You get the saddle bracket and the bracket that bolts to the mtr mount. I think it was $39.00 for the set....... __________________ 1997 GMC Sierra Ext 1965 Mustang

07-19-2005, 05:00 PM	#5
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	If you're talking about the cast iron piece...I got mine off a 80's van with SB v8. Wish I could be more specific as far as years these were used. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

07-19-2005, 05:14 PM	#6
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	I bought new stuff from www.alangrovecomponents.com that let me mount the alternator lower on the block. __________________ Silence is golden, duct tape is silver. - Scott

07-19-2005, 03:08 PM	#3
1972ChevyCheyenne Registered User Join Date: Sep 2004 Location: Teeswater, Ontario, Canada Posts: 173	Tomatocity I got a good idea what it looks like, but wrecking yards do have anything 67-72 trucks around. So I need to know what other vehicle I might be able to get them off. Jamie

07-19-2005, 07:04 PM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	There are actually 2 kinds used on 67-72 trucks. I clicked a picture of each. __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 07-19-2005 at 07:04 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.