396 Steel Crank $50 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Desert Rat** · 07-19-2005, 07:30 PM

This will need to be picked up. I did not pull this out of a motor but got it in a deal of some sort years ago. It is marked .010 with a yellow wrecking yard type marker. but i have no idea. i cannot ship this item, and id prefer someone to be able to come inspect it before purchasing, just incase. I'd take $50 if it checks out okay.

GenIIIShorty · 07-19-2005, 07:33 PM

man you are killin me! too bad i'm all they way up in WA......what other goodies are ya trying to tempt me with?

**Desert Rat** · 07-19-2005, 07:39 PM

I don't know, what do you need? I do not have alot left. I have 5 or 6 truck consoles and other misc. pieces, but none of that real good stuff anymore.

GenIIIShorty · 07-19-2005, 07:41 PM

i'm still lookinjg for a good step bed right now, but as my title says, i'm a junk collector......got any sbc pink rods?

**Desert Rat** · 07-19-2005, 08:00 PM

There is a couple step beds in a bone yard down here, but both have the spare tire cut out. Iwill hopefully need a bed in the near future. id prefer a short wide but a step with a tire cut out is better than none! sorry no sbc rods

qksilver · 07-19-2005, 10:14 PM

How far are you from Show Low?

**Desert Rat** · 07-19-2005, 10:17 PM

174 miles and 3 1/2 hours according to mapquest.

qksilver · 07-20-2005, 12:20 AM

A buddy of mine lives there but right now he is here in NC. He won't be back untill Aug 10, pm me if you still have it. He has mike's etc.
Thanks,
Steve

**Desert Rat** · 07-20-2005, 12:34 AM

I live actually next door to a machine shop. I can see what they would charge i can just add that cost to the price of the crank? It might be cheaper than driving 175 miles and find out its bad? Just a thought. then i could supply a machine shop reciept on specs.

**Desert Rat** · 07-20-2005, 01:45 AM

I'm sorry but i made a trade with another member a while back that included a block and 2 cranks and they are apparently are bad, so the least i can do is give him this one to make good on the previous deal. I hope you can understand. Thank you

07-19-2005, 07:30 PM	#1
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	396 Steel Crank $50 This will need to be picked up. I did not pull this out of a motor but got it in a deal of some sort years ago. It is marked .010 with a yellow wrecking yard type marker. but i have no idea. i cannot ship this item, and id prefer someone to be able to come inspect it before purchasing, just incase. I'd take $50 if it checks out okay.

07-19-2005, 07:33 PM	#2
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	man you are killin me! too bad i'm all they way up in WA......what other goodies are ya trying to tempt me with? __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

07-19-2005, 07:41 PM	#4
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	i'm still lookinjg for a good step bed right now, but as my title says, i'm a junk collector......got any sbc pink rods? __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

07-20-2005, 12:34 AM	#9
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	I live actually next door to a machine shop. I can see what they would charge i can just add that cost to the price of the crank? It might be cheaper than driving 175 miles and find out its bad? Just a thought. then i could supply a machine shop reciept on specs. Last edited by Desert Rat; 07-20-2005 at 12:35 AM.

07-19-2005, 07:39 PM	#3
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	I don't know, what do you need? I do not have alot left. I have 5 or 6 truck consoles and other misc. pieces, but none of that real good stuff anymore.

07-19-2005, 08:00 PM	#5
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	There is a couple step beds in a bone yard down here, but both have the spare tire cut out. Iwill hopefully need a bed in the near future. id prefer a short wide but a step with a tire cut out is better than none! sorry no sbc rods

07-19-2005, 10:14 PM	#6
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	How far are you from Show Low?

07-19-2005, 10:17 PM	#7
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	174 miles and 3 1/2 hours according to mapquest.

07-20-2005, 12:20 AM	#8
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	A buddy of mine lives there but right now he is here in NC. He won't be back untill Aug 10, pm me if you still have it. He has mike's etc. Thanks, Steve

07-20-2005, 01:45 AM	#10
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	I'm sorry but i made a trade with another member a while back that included a block and 2 cranks and they are apparently are bad, so the least i can do is give him this one to make good on the previous deal. I hope you can understand. Thank you



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.