bigarmzz - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 07-19-2005, 09:34 PM

Quote:

Originally Posted by 86 GMG

why dont you want a reproduction as long as it fits....

That's the biggest problem. Most GM pads fit like crap, the aftermarket ones are even worse.

I could care less what color I find. All my interior has been re-dyed so even if I found a maroon pad it probably wouldn't match my interior perfectly anyway....

82c10 · 07-19-2005, 10:11 PM

Quote:

Originally Posted by N2TRUX

That's the biggest problem. Most GM pads fit like crap, the aftermarket ones are even worse.

are they really that bad

bigarmzz · 07-19-2005, 10:44 PM

Quote:

Originally Posted by kevinr1970

I bought a black one from alphamale203 (or something like that) a while back with a set of the door panels (lower end ones) and visors.
I don't remember what I paid for them but I think I am going in another direction with that truck. I will think about selling the set.
The dash has no cracks *EXCEPT* on the side that you see when you open the doors.
BTW, how do you keep a good dash from cracking to begin with? Armorall every other day or what?? My other 2wd Blazer has what looks to be a brand new dash pad and I want to keep it looking that way.

post some pics?...i might be interested, if the crack isnt too obvious

i'm thinkin about maybe changin my interior to black instead of red.....maybe

kevinr1970 · 07-20-2005, 01:50 AM

Quote:

Originally Posted by bigarmzz

post some pics?...i might be interested, if the crack isnt too obvious

i'm thinkin about maybe changin my interior to black instead of red.....maybe

I'll dig it out tommorow. I am in need of some good red door panels, power or not. Maybe we could work something out?

kevinr1970 · 07-20-2005, 03:22 PM

I looked at it last night before I went to bed. There is one crack on the driver side that starts on the side (towards the door) and just makes it to the top of the arc from side to top. It is heading for the holes that would be the speaker holes I think.
You might not ever see it unless the door is open?
After looking at it and reading the other treads about dyeing vs. painting it might be something I should hold on to. I have a few projects at the moment.
When I sell my 82 2wd Blazer it might be worth putting it in there to help seal the deal as the red dash pad in there is pretty wasted.

How do you keep them from cracking?????

82c10 · 07-20-2005, 10:42 PM

http://cgi.ebay.com/ebaymotors/ws/eB...tem=7988344243 , almost

someone dropped it

82c10 · 07-20-2005, 10:42 PM

the dashpad is what i am talking about

boxrodz · 07-21-2005, 01:25 AM

Has anyone looked into Just Dashes to cover a OEM Dash?

07-20-2005, 03:22 PM	#30
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	I looked at it last night before I went to bed. There is one crack on the driver side that starts on the side (towards the door) and just makes it to the top of the arc from side to top. It is heading for the holes that would be the speaker holes I think. You might not ever see it unless the door is open? After looking at it and reading the other treads about dyeing vs. painting it might be something I should hold on to. I have a few projects at the moment. When I sell my 82 2wd Blazer it might be worth putting it in there to help seal the deal as the red dash pad in there is pretty wasted. How do you keep them from cracking????? __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

07-20-2005, 10:42 PM	#31
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	http://cgi.ebay.com/ebaymotors/ws/eB...tem=7988344243 , almost someone dropped it __________________ *SWB Stands for Short Wide Bed*

07-20-2005, 10:42 PM	#32
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	the dashpad is what i am talking about __________________ *SWB Stands for Short Wide Bed*

07-21-2005, 01:25 AM	#33
boxrodz Until Seventy Times Seven Join Date: Feb 2005 Location: Rocky Mountain Front Range Posts: 1,301	Has anyone looked into Just Dashes to cover a OEM Dash? __________________ boxRODz 1983 C10 SWB Fleetside When two halves is gone, there's nuthin left. Two nothings is nuthin. That's mathematics son. You can argue with me but you can't argue with figures. Two half nothings is a whole nuthin...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.