Parting a 1970 Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mark540 · 05-19-2005, 04:22 PM

Hello,
Gauging interest in a project I decided to part. Too many projects too little time.
All are from a 1970 GMC Suburban 4x4
Barn Doors rust free, couple of holes where a licence plate was mounted $250 would like them picked up, but would ship for $120
Front doors for a suburban some dents but rust free, $100 pick up only
Rear lower quarter patch panels from GMC Pauls, one was tacked in , I will be removing $200 shipped for both sides
TH350/205 combowith adapter, tranny needs kick down cable($20 from Autozone) with new frame bushings $250 no shipping
4x4 steering box $75 shipped
67-68 Chevy hood small surface rust in a couple of small spots on the front edge $100 no shipping
70 GMC fenders rust free, but pass is dented on lower front corner $150 for both would rather not ship
4x4 1970 frame 3.54 axles open, drum front, frame is from Nevada, and is great shape, with body carcus $250 no shipping.
67-68 chevy grill lots of surface rust $80 shipped
70 GMC radiator support rust free $75 no shipping
Suburban gas tank $50, no shipping
3rd door patch panel tacked in where it metal was ripped, rust free $50 no shipping
Front drive shaft $40 shipped
Rear drive shaft, farly new steel unit $75 no shipping

Frame is a rolling chassis, body has rust free rockers. i will try to get rid of this stuff for a few weeks and will take it to the junk yard to get the space in the garage back. I am located in Fairborn, Ohio outside of Dayton. Thanks, Mark Please e-mail instead of PMing at myingling@moyno.com

Pics upon request

vtblazer · 05-20-2005, 05:55 AM

Any pics of the frame/carcus?
Is the body worth trying to save?

Mark540 · 05-20-2005, 08:24 AM

I will be getting some pictures tonight, the body is better than most, Rockers are rust free, patch panels were needed because of a poor patch job after getting banged up off roading, drivers side was hit behind the door and I had tacked in a new panel, but not finished. I had also tacked in one of the rear quarter panels, but will be removing it to sell with the other panel unless a complete deal can be made. Basically The body would be a shell unless the interest was there to get it whole. I would see it as a unit with all the doors fenders etc. for $1000 without the transmission and transfer case.

Thanks,

mark

**gregfull** · 05-20-2005, 02:47 PM

What about the LT1 and the 4L60E?

Are those for sale?

Mark540 · 05-20-2005, 02:52 PM

Sorry using those for my Corvette project.

qksilver · 05-20-2005, 07:31 PM

How much for a package deal? I am leaving tonorrow for a week so It might be a couple of days before I can check my email. I would pick up but it would have to roll.
Steve
SCJKOVACH@aol.com some pix would be nice

86swb · 05-20-2005, 11:33 PM

I am missing one chrome piece that goes on the end of the headliner chrome. Do you have these? How much? Thanks

Mark540 · 05-21-2005, 09:55 AM

Sorry the interior is completely gone, I was looking to get $1000 for the complete deal, but that will probably change as I have interest in at least a few of the parts at this time. Thanks, Mark

qksilver · 05-21-2005, 01:41 PM

I will be back in a week, pm me and maybe we can work out something on whats left.
Thanks,
Steve

blackrider · 05-22-2005, 07:11 AM

Hey 86swb I have some of those chrome headliner pieces that you need. I see your in western kentucky. I live in Southern IL. E-mail me at alex_suburban@yahoo.com I also have a bunch of other parts as well. Your not to far away, lets talk

Joe67 · 07-24-2005, 05:44 PM

Do you have a front drivers side door glass available?

Thanks.

05-19-2005, 04:22 PM	#1
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Parting a 1970 Suburban Hello, Gauging interest in a project I decided to part. Too many projects too little time. All are from a 1970 GMC Suburban 4x4 Barn Doors rust free, couple of holes where a licence plate was mounted $250 would like them picked up, but would ship for $120 Front doors for a suburban some dents but rust free, $100 pick up only Rear lower quarter patch panels from GMC Pauls, one was tacked in , I will be removing $200 shipped for both sides TH350/205 combowith adapter, tranny needs kick down cable($20 from Autozone) with new frame bushings $250 no shipping 4x4 steering box $75 shipped 67-68 Chevy hood small surface rust in a couple of small spots on the front edge $100 no shipping 70 GMC fenders rust free, but pass is dented on lower front corner $150 for both would rather not ship 4x4 1970 frame 3.54 axles open, drum front, frame is from Nevada, and is great shape, with body carcus $250 no shipping. 67-68 chevy grill lots of surface rust $80 shipped 70 GMC radiator support rust free $75 no shipping Suburban gas tank $50, no shipping 3rd door patch panel tacked in where it metal was ripped, rust free $50 no shipping Front drive shaft $40 shipped Rear drive shaft, farly new steel unit $75 no shipping Frame is a rolling chassis, body has rust free rockers. i will try to get rid of this stuff for a few weeks and will take it to the junk yard to get the space in the garage back. I am located in Fairborn, Ohio outside of Dayton. Thanks, Mark Please e-mail instead of PMing at myingling@moyno.com Pics upon request __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

05-20-2005, 08:24 AM	#3
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	I will be getting some pictures tonight, the body is better than most, Rockers are rust free, patch panels were needed because of a poor patch job after getting banged up off roading, drivers side was hit behind the door and I had tacked in a new panel, but not finished. I had also tacked in one of the rear quarter panels, but will be removing it to sell with the other panel unless a complete deal can be made. Basically The body would be a shell unless the interest was there to get it whole. I would see it as a unit with all the doors fenders etc. for $1000 without the transmission and transfer case. Thanks, mark __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

05-20-2005, 02:47 PM	#4
gregfull Registered User Join Date: Jan 2004 Location: Richmond, Texas Posts: 598	What about the LT1 and the 4L60E? Are those for sale? __________________ My Suburban Project 72 Suburban 68 SWB 57 Belair 55 Cameo 06 Chevy 1/2 ton crew 09 Suburban

05-20-2005, 02:52 PM	#5
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Sorry using those for my Corvette project. __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

05-20-2005, 11:33 PM	#7
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	I am missing one chrome piece that goes on the end of the headliner chrome. Do you have these? How much? Thanks __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

05-20-2005, 05:55 AM	#2
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Any pics of the frame/carcus? Is the body worth trying to save?

05-20-2005, 07:31 PM	#6
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	How much for a package deal? I am leaving tonorrow for a week so It might be a couple of days before I can check my email. I would pick up but it would have to roll. Steve SCJKOVACH@aol.com some pix would be nice

05-21-2005, 09:55 AM	#8
Mark540 Registered User Join Date: Feb 2003 Location: Fairborn,OH Posts: 203	Sorry the interior is completely gone, I was looking to get $1000 for the complete deal, but that will probably change as I have interest in at least a few of the parts at this time. Thanks, Mark __________________ 1970 GMC Burb 4x4 - 68 Chevy Front, FI LT1, 4L60E 1970 Chevy Impala 47,000 miles 2001 BMW 540i 6-speed 2002 Dodge Ram 1500 4x4 w/20's

05-21-2005, 01:41 PM	#9
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	I will be back in a week, pm me and maybe we can work out something on whats left. Thanks, Steve

05-22-2005, 07:11 AM	#10
blackrider Roll with the punches Join Date: Apr 2005 Location: Murphysboro, IL Posts: 103	Hey 86swb I have some of those chrome headliner pieces that you need. I see your in western kentucky. I live in Southern IL. E-mail me at alex_suburban@yahoo.com I also have a bunch of other parts as well. Your not to far away, lets talk

07-24-2005, 05:44 PM	#11
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Do you have a front drivers side door glass available? Thanks. __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.