|
07-23-2005, 11:53 PM
|
#1 |
|
OLD FART(I GUESS)
Join Date: Jul 2005
Location: catoosa, okla
Posts: 58
|
parts swapout help
i am just starting resto on a 67 c10 shortbed stepside
 what i was wondering is if anyone has every attempted or if it will fit, i have a donor van that is a c20 1981, and im wondering if the crossmember and steering column and maybe rearend will work under this 67. i had the van given to me with a good 305 4bbl motor and transmission in it and would like to use all parts possible, if anyone knows whether they will fit....  i really dont want to do alot of modification to make them fit. and if the frontend crossmember will work, when i go to buy lowering springs, do i get them for a 81 or a 67? all help would be appreciated as i have never really attempted a frame up resto before and am anxious to get started.
|
|
|
|
07-24-2005, 01:44 AM
|
#2 |
|
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
|
Welcome to the board from South Mississippi! Check out our FAQ section for a lot of good info. I don't know about the suspension or rear end, but the column will work if it has the ignition switch on the dash. I don't know when gm started putting them on the column on vans.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal.  We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
|
|
|
|
07-25-2005, 10:15 AM
|
#3 |
|
OLD FART(I GUESS)
Join Date: Jul 2005
Location: catoosa, okla
Posts: 58
|
thanks. i checked faq's out before posting and didnt see anything. i can definately use column but the crossmember and rearend is what im really wondering about. any ideas how i can find out or is there a way to measure?
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
