FS: 1991 suburban complete front clip - The 1947 - Present Chevrolet & GMC Truck Message Board Network

plumbcut · 07-23-2005, 07:24 PM

'91 chevy suburban front clip, in good shape, no rust.. complete with front bumper, core support, etc... PM me your email for pics.. located in san diego.. free delivery within 20 miles of 92082.. will be going on ebay soon. $1000 firm

pc

Fordeater · 07-24-2005, 09:27 PM

just wanted to make sure i was reading that price right. Does that say one THOUSAND dollars?

plumbcut · 07-24-2005, 09:43 PM

yep, if you want to peice it together cheaper, be my guest! :flm:

inner & outter fenders & both skirts for both sides, hood & the cowl hood peice (at the base of windshield), complete core support, wiring radiator "cap", lights & lenses & wiring, hood latch, and a front bumper w/ brackets... its turn key & 100% rust free.. thanks for looking

pc

kevinr1970 · 07-25-2005, 12:58 AM

Something is worth what someone else will pay for it.
That being said, if you get your asking price let me know as I bought my '89 Sub complete for 1/2 that and would gladly sell the clip and buy one of the 2-3 other 89-91 Subs I could buy for a similar price as well.

plumbcut · 07-25-2005, 01:25 AM

I know what a $500 '89 suburban is like!

longhorn71 · 07-25-2005, 02:14 AM

those clips sell for 600-800 here and we have bad rust problems.The reason is they were only made in 89-91 with that grill

bigarmzz · 07-25-2005, 08:42 AM

i got a total rust free front end from a 90' sub here for only $200

kept the rad support and grille, and sold the fenders and hood, and acutally made about $100

CHEVYE · 07-25-2005, 10:15 AM

same here, about $250 would get you a mint front clip. his price may not be outa line guys, i think it depends on where you live. i have 3 awesome acres of land, a 2100 sq. foot house with garage and a pool that i paid 66k for. i talk to guys at work on the phone from cali all day and the same house out there would be 400 grand

, that's a little something to consider.

kevinr1970 · 07-25-2005, 02:50 PM

Quote:

Originally Posted by plumbcut

I know what a $500 '89 suburban is like!

Not doggin' on ya' as a lot of people are looking for that setup. I just happen to have access to a few different Sub's right now.
Yes the $500 Sub isn't a show piece (dented in the rear quarters on each side) but it does have a running TBI 350 and 700r4, set of four 15x8 rallyes with trim rings and centers and a ton of other parts including a nice interior and good barn doors - plus I get a front clip too!!!

plumbcut · 07-25-2005, 07:49 PM

whilst we are on the subject, im actually parting out an entire burb right now.. im wanting to get RID of the front clip asap thats why I posted it... its a '91 454/4l80e fully optioned 2wd 3/4ton.. anyone looking for anything? i dont wanna ship big parts unless you REALLY REALLY want it... the engine & trans & front doors are definately spoken for... anything else is fair game, I guess..... I guess $1k might be a little pricey for the clip and I dont doubt that you can find them cheaper... but I also know that this stuff isnt that easy to come by especially if youre looking to do a late model clip conversion on your pickup... If I were in the market, Id be willing to pay up to about a "G" for what Im selling.. if someone wants to make a reasonable offer or trade, Im all ears.. I will trade the clip straight up for a th400 bolt pattern NP205 transfer case w/ adapter... that would be an excellent deal... thanks for looking

pc

plumbcut · 07-25-2005, 08:10 PM

pic

1987 Shortwide · 07-25-2005, 08:31 PM

hmm, I a brand new core support, brand new grille, brand new H/L bezels, wiring, lights and brand new in the box park lights with a Billet grille (GMC grille) for.....

FREEEEEEE

Here it is before the new park lights and billet insert were purchased...

HOWEVER, not to steer from this F/S add, and get to the point, when these parts were purchased NEW, they were indeed MORE than 1,000 dollars. Therefore, that price isn't out of the question for the amount of things listed.

plumbcut · 07-25-2005, 08:44 PM

wow that looks pretty nice.. I SERIOUSLY considered running this 91 clip on my '77 K25 but I just dont want to change from the older front end style.. I REALLY like the look of the '77... having a locking (inside latch) rust free, clip sounds real nice and it would give it some amount of customization (being that they didnt make shortbed 4x4 in '91 with that clip) but I guess im somewhat of a purist and decided to get rid of the stuff.... Im sure Ill be kicking myself when I goto replace all the sheet metal on my truck cuz its gonna cost me a mint.

pc

79BIG10 · 07-26-2005, 12:41 AM

If the tranny hadn't been spoken for I would be interested being a 4L80E. Are you still going to use the interior for the 77?

Jonboy · 07-26-2005, 08:37 AM

how much for the mirrors and wiring?

milehightoyz · 07-26-2005, 11:54 AM

put me inline for the mirrors too

Jonboy · 07-26-2005, 12:21 PM

Hey pc, why not just convert your 77 to the inside hood release? I scored one in the pick a part off of a 78 or 79, and all it takes is to swap out the top part of your radiator support. Drill one hole for the cable, replace the hood striker, and it's done.

plumbcut · 07-26-2005, 08:08 PM

big10- Ive been having a heap of problems with my BTO 700r4... Im seriously considering swapping it out for the 4l80e... if I dont, Ill let you know..

as for the mirrors, they are part of the doors

thanks for asking.....

jonboy- thats an option, I might look into it...

pc

07-23-2005, 07:24 PM	#1
plumbcut california fill Join Date: Apr 2004 Location: Sunny So-Cal Posts: 694	FS: 1991 suburban complete front clip & more '91 chevy suburban front clip, in good shape, no rust.. complete with front bumper, core support, etc... PM me your email for pics.. located in san diego.. free delivery within 20 miles of 92082.. will be going on ebay soon. $1000 firm pc Last edited by plumbcut; 07-25-2005 at 08:54 PM.

07-25-2005, 12:58 AM	#4
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Something is worth what someone else will pay for it. That being said, if you get your asking price let me know as I bought my '89 Sub complete for 1/2 that and would gladly sell the clip and buy one of the 2-3 other 89-91 Subs I could buy for a similar price as well. __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

07-25-2005, 08:42 AM	#7
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,542	i got a total rust free front end from a 90' sub here for only $200 kept the rad support and grille, and sold the fenders and hood, and acutally made about $100 __________________ 1987 350 TBI lowered 5/7 Last edited by bigarmzz; 07-25-2005 at 08:43 AM.

07-25-2005, 10:15 AM	#8
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	same here, about $250 would get you a mint front clip. his price may not be outa line guys, i think it depends on where you live. i have 3 awesome acres of land, a 2100 sq. foot house with garage and a pool that i paid 66k for. i talk to guys at work on the phone from cali all day and the same house out there would be 400 grand , that's a little something to consider. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

07-25-2005, 08:10 PM	#11
plumbcut california fill Join Date: Apr 2004 Location: Sunny So-Cal Posts: 694	pic Attached Images

07-24-2005, 09:27 PM	#2
Fordeater Junior Member Join Date: Dec 2004 Location: San Antonio, Tx Posts: 57	just wanted to make sure i was reading that price right. Does that say one THOUSAND dollars?

07-24-2005, 09:43 PM	#3
plumbcut california fill Join Date: Apr 2004 Location: Sunny So-Cal Posts: 694	yep, if you want to peice it together cheaper, be my guest! :flm: inner & outter fenders & both skirts for both sides, hood & the cowl hood peice (at the base of windshield), complete core support, wiring radiator "cap", lights & lenses & wiring, hood latch, and a front bumper w/ brackets... its turn key & 100% rust free.. thanks for looking pc

07-25-2005, 01:25 AM	#5
plumbcut california fill Join Date: Apr 2004 Location: Sunny So-Cal Posts: 694	I know what a $500 '89 suburban is like!

07-25-2005, 02:14 AM	#6
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	those clips sell for 600-800 here and we have bad rust problems.The reason is they were only made in 89-91 with that grill

07-25-2005, 07:49 PM	#10
plumbcut california fill Join Date: Apr 2004 Location: Sunny So-Cal Posts: 694	whilst we are on the subject, im actually parting out an entire burb right now.. im wanting to get RID of the front clip asap thats why I posted it... its a '91 454/4l80e fully optioned 2wd 3/4ton.. anyone looking for anything? i dont wanna ship big parts unless you REALLY REALLY want it... the engine & trans & front doors are definately spoken for... anything else is fair game, I guess..... I guess $1k might be a little pricey for the clip and I dont doubt that you can find them cheaper... but I also know that this stuff isnt that easy to come by especially if youre looking to do a late model clip conversion on your pickup... If I were in the market, Id be willing to pay up to about a "G" for what Im selling.. if someone wants to make a reasonable offer or trade, Im all ears.. I will trade the clip straight up for a th400 bolt pattern NP205 transfer case w/ adapter... that would be an excellent deal... thanks for looking pc

07-25-2005, 08:31 PM	#12
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	hmm, I a brand new core support, brand new grille, brand new H/L bezels, wiring, lights and brand new in the box park lights with a Billet grille (GMC grille) for..... FREEEEEEE Here it is before the new park lights and billet insert were purchased... HOWEVER, not to steer from this F/S add, and get to the point, when these parts were purchased NEW, they were indeed MORE than 1,000 dollars. Therefore, that price isn't out of the question for the amount of things listed. __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean. Last edited by 1987 Shortwide; 07-25-2005 at 08:35 PM.

07-25-2005, 08:44 PM	#13
plumbcut california fill Join Date: Apr 2004 Location: Sunny So-Cal Posts: 694	wow that looks pretty nice.. I SERIOUSLY considered running this 91 clip on my '77 K25 but I just dont want to change from the older front end style.. I REALLY like the look of the '77... having a locking (inside latch) rust free, clip sounds real nice and it would give it some amount of customization (being that they didnt make shortbed 4x4 in '91 with that clip) but I guess im somewhat of a purist and decided to get rid of the stuff.... Im sure Ill be kicking myself when I goto replace all the sheet metal on my truck cuz its gonna cost me a mint. pc

07-26-2005, 12:41 AM	#14
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	If the tranny hadn't been spoken for I would be interested being a 4L80E. Are you still going to use the interior for the 77? __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

07-26-2005, 08:37 AM	#15
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	how much for the mirrors and wiring? __________________ 1974 Jimmy- 5.3/4L80e/NP241

07-26-2005, 11:54 AM	#16
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	put me inline for the mirrors too



Register or Log In To remove these advertisements.

07-26-2005, 12:21 PM	#17
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Hey pc, why not just convert your 77 to the inside hood release? I scored one in the pick a part off of a 78 or 79, and all it takes is to swap out the top part of your radiator support. Drill one hole for the cable, replace the hood striker, and it's done. __________________ 1974 Jimmy- 5.3/4L80e/NP241

07-26-2005, 08:08 PM	#18
plumbcut california fill Join Date: Apr 2004 Location: Sunny So-Cal Posts: 694	big10- Ive been having a heap of problems with my BTO 700r4... Im seriously considering swapping it out for the 4l80e... if I dont, Ill let you know.. as for the mirrors, they are part of the doors thanks for asking..... jonboy- thats an option, I might look into it... pc

Register or Log In To remove these advertisements.