Thread Missing?!?!?!? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72longbed* · 07-23-2005, 07:23 AM

I will attempt to re-list my search here today and ask that any Member, Administrator or other knowledgable person express their opinion on whether my requests are unusual, illegal or otherwise different from what other members have been requesting for as long as this WebSite has been in existance. Here goes:

WTB: (wanted to buy) a 71/72 CAB from a 4x4, 3/4 ton pickup, Longbed. Must have a Title and valid VIN plate with it. Will consider a Frame from same type truck, but it must have a valid Title and VIN plate with it. Either one or both of these parts can be in totally rusted out junk, scrap, crap condition, doesn't matter.

There...., thats it. Thank you all for letting me vent my frustration.
Sincerely,
72longbed

*72longbed* · 07-23-2005, 09:31 PM

ttt

vtblazer · 07-24-2005, 09:00 AM

Willing to travel to VT?
Have a 3/4 ton 4x4 chassis, let me make sure about the title first though...
Don't need titles in VT for these old trucks so I gotta check.

*72longbed* · 07-24-2005, 03:59 PM

Yes VT,
please check to see if you have the VIN plate that would be in the drivers side door pillar, AND the TITLE. I need both to be legal in PA.

Thank you for looking into it, and I look forward to hearing back from you.

72longbed

*72longbed* · 07-25-2005, 06:09 PM

ttt

vtblazer · 07-25-2005, 06:18 PM

Hey sorry, no title to that truck.

masterbeavis · 07-25-2005, 10:40 PM

Heh, in Ca, you just fill out another form for a lost title, sign as the seller in the parking lot, get back in line, you are done

vtblazer · 07-26-2005, 06:24 AM

Quote:

Originally Posted by vtblazer

Hey sorry, no title to that truck.

Do have the vin plate if that would help.

*72longbed* · 07-26-2005, 09:05 AM

VTBlazer,

could you PM me with the info on the VIN PLate? I need to know the GVWR, front and rear and the chassis length and so forth.

Thanks,
72longbed

vtblazer · 07-26-2005, 07:41 PM

Heres what's on the vin plate.

.............................As Manufactured..................Maximum Capacity
Gross Weight...................6400...................................7500

Maximum Front End
Weight @ Ground..............3500...................................3500

Maximum Rear End
Weight @ Ground..............3980...................................5000

After that info is the vin #'s

Hope this helps, good luck.

*72longbed* · 07-26-2005, 08:38 PM

VTBlazer,
I don't have my 'Factory Service Manual' here at home, but somewhere in the VIN # theres a letter or number that indicates the chassis length (114"?, 127", 133", etc.). Do you have the info that tells you this? If so, what is the length of the chassis that goes with that VIN plate?

Very Interested,
72longbed

**JIMs70GMC** · 07-26-2005, 08:49 PM

If it's 3/4 ton 4wd then it can only be 127". no shortbeds, no longhorns

*72longbed* · 07-26-2005, 08:49 PM

vt,

Here's the info from my 1972 C20:

AS Manufactured......................Maximum Capability

6200......................................7500

3500......................................3500

4000......................................5500

It's a long bed. Why does my 2WD have a higher GVW rating than your 4x4??
Does anybody know the answer?

Thanks,
72longbed

vtblazer · 07-26-2005, 10:02 PM

Vin #

CKS2421104990

Jims correct, it's a 127 incher.

Blue_71 · 07-26-2005, 10:10 PM

did your 2wd have a v8? by VT's vin number, the S means it was 6 cylinder

vtblazer · 07-26-2005, 10:27 PM

Quote:

Originally Posted by Blue_71

did your 2wd have a v8? by VT's vin number, the S means it was 6 cylinder

Correct, 292 inline.

What would the gears in the axels most likely be? Any idea?
4:11's or 4:56's?
Those 3/4 ton axels are heading for my blazer soon.

Blue_71 · 07-26-2005, 10:29 PM

i guess i should have mentioned that my comment was to say that may be why the 4x4 has a lower GVWR, LOL. im not really sure what gears it should have, but my guess would be 4.11... i have a book for 71 that tells, but dunno if it would be same for 72

*72longbed* · 07-27-2005, 11:50 AM

vtblazer,
I'd be very interesred in knowing what the process is in VT. to transfer ownership to me here in PA. Also if there is a document, (Title or Ownership Affidavid) that you can get from the State of VT. that would make the transfer more easy here in PA? Thanks for looking into this, I am very interested in doing this with you.

72longbed

07-23-2005, 07:23 AM	#1
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Thread Missing?!?!?!? I will attempt to re-list my search here today and ask that any Member, Administrator or other knowledgable person express their opinion on whether my requests are unusual, illegal or otherwise different from what other members have been requesting for as long as this WebSite has been in existance. Here goes: WTB: (wanted to buy) a 71/72 CAB from a 4x4, 3/4 ton pickup, Longbed. Must have a Title and valid VIN plate with it. Will consider a Frame from same type truck, but it must have a valid Title and VIN plate with it. Either one or both of these parts can be in totally rusted out junk, scrap, crap condition, doesn't matter. There...., thats it. Thank you all for letting me vent my frustration. Sincerely, 72longbed Last edited by 72longbed; 07-25-2005 at 06:08 PM.

07-23-2005, 09:31 PM	#2
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	ttt Last edited by 72longbed; 07-23-2005 at 09:32 PM.

07-25-2005, 10:40 PM	#7
masterbeavis Having issues Join Date: Jul 2005 Location: Eldorado Ca, an hour east of sacramento Posts: 696	Heh, in Ca, you just fill out another form for a lost title, sign as the seller in the parking lot, get back in line, you are done __________________ Quando Omni Flunkus Moritati. The Man's Prayer: "I'm a man, but I can change, if I have to, I guess."

07-26-2005, 09:05 AM	#9
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	VIN Plate VTBlazer, could you PM me with the info on the VIN PLate? I need to know the GVWR, front and rear and the chassis length and so forth. Thanks, 72longbed

07-26-2005, 07:41 PM	#10
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Heres what's on the vin plate. .............................As Manufactured..................Maximum Capacity Gross Weight...................6400...................................7500 Maximum Front End Weight @ Ground..............3500...................................3500 Maximum Rear End Weight @ Ground..............3980...................................5000 After that info is the vin #'s Hope this helps, good luck. Last edited by vtblazer; 07-26-2005 at 07:43 PM.

07-24-2005, 09:00 AM	#3
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Willing to travel to VT? Have a 3/4 ton 4x4 chassis, let me make sure about the title first though... Don't need titles in VT for these old trucks so I gotta check.

07-24-2005, 03:59 PM	#4
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Yes VT, please check to see if you have the VIN plate that would be in the drivers side door pillar, AND the TITLE. I need both to be legal in PA. Thank you for looking into it, and I look forward to hearing back from you. 72longbed

07-25-2005, 06:09 PM	#5
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	ttt

07-25-2005, 06:18 PM	#6
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Hey sorry, no title to that truck.

07-26-2005, 08:38 PM	#11
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Chassis Length? VTBlazer, I don't have my 'Factory Service Manual' here at home, but somewhere in the VIN # theres a letter or number that indicates the chassis length (114"?, 127", 133", etc.). Do you have the info that tells you this? If so, what is the length of the chassis that goes with that VIN plate? Very Interested, 72longbed Last edited by 72longbed; 07-26-2005 at 08:40 PM.

07-26-2005, 08:49 PM	#12
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	If it's 3/4 ton 4wd then it can only be 127". no shortbeds, no longhorns __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

07-26-2005, 08:49 PM	#13
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Info From My C20 vt, Here's the info from my 1972 C20: AS Manufactured......................Maximum Capability 6200......................................7500 3500......................................3500 4000......................................5500 It's a long bed. Why does my 2WD have a higher GVW rating than your 4x4?? Does anybody know the answer? Thanks, 72longbed Last edited by 72longbed; 07-26-2005 at 08:52 PM.

07-26-2005, 10:02 PM	#14
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Vin # CKS2421104990 Jims correct, it's a 127 incher. Last edited by vtblazer; 07-26-2005 at 10:04 PM.

07-26-2005, 10:10 PM	#15
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,285	did your 2wd have a v8? by VT's vin number, the S means it was 6 cylinder

07-27-2005, 11:50 AM	#18
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Transfer Info? vtblazer, I'd be very interesred in knowing what the process is in VT. to transfer ownership to me here in PA. Also if there is a document, (Title or Ownership Affidavid) that you can get from the State of VT. that would make the transfer more easy here in PA? Thanks for looking into this, I am very interested in doing this with you. 72longbed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.