open oil dipstick hole - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jeremy_5 · 08-01-2005, 07:52 PM

I just noticed that the previous owner had relocated the oil dipstick for clearance reasons, the original opening in the pan was just left open. I plugged it with a little silicone plug. Is that ok? Or is it fine just to leave it open as it was?

neonlarry · 08-01-2005, 08:18 PM

I guess it depends on how much dirt you want in your oil pan. Its a small hole but I would plug it.

Longhorn Man · 08-01-2005, 09:05 PM

As long as your plug stays there, it'll be OK. The PO may have placed a plug in there and exsesive cranc case pressure could have popped it out. But most likley, he was just lazy.

08-01-2005, 07:52 PM	#1
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	open oil dipstick hole I just noticed that the previous owner had relocated the oil dipstick for clearance reasons, the original opening in the pan was just left open. I plugged it with a little silicone plug. Is that ok? Or is it fine just to leave it open as it was? __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20 Last edited by Jeremy_5; 08-01-2005 at 07:52 PM.

08-01-2005, 08:18 PM	#2
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	I guess it depends on how much dirt you want in your oil pan. Its a small hole but I would plug it. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

08-01-2005, 09:05 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	As long as your plug stays there, it'll be OK. The PO may have placed a plug in there and exsesive cranc case pressure could have popped it out. But most likley, he was just lazy.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.