For Sale: Alan Grove Components Brackets for SB LWP A/C and Alt. No Head holes needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69Goody · 07-25-2005, 04:04 PM

Hey folks,
I have a set of Alan Grove Components brackets for the A/C and Alternator.
I bought them originally for a set of double hump heads without accessory bolt holes, but ended going a little more high-tech with a set of Edelbrock Heads and now Zoop brackets.
These brackets are made of steel and are paintable to match your block or color scheme. They also work with heads w/ bolt holes...they just won't use them.
$45 each or $80 for both of them. BOTH SOLD
They are located in Ohio.
I'll ship them UPS.

LUV2XCLR8 · 07-25-2005, 05:54 PM

This is a smoking deal, these things are not cheap, I would buy em if I
had the extra cash, anyways, TTT for ya and good luck with your sale.

**Ridgeback** · 07-26-2005, 12:23 AM

69Goody:

I am interestedin your brackets. Do you know the Grove part numbers and if the ac brackets will fit either the GM A6 compressor or a Sanden compressor? Thanks.

69Goody · 07-26-2005, 06:52 AM

Hey Ridgback,
The part numbers are:
123R - A.C.
223L - ALT.
I bought them to mount a Sanden 508.
The link to their site is:
http://www.alangrovecomponents.com/S.B.Long_Pump.htm

The items are about half way down the page. I'll run out to my shed also and look at the paperwork and see if there was any special indication of what they could or could not fit.

69Goody · 07-26-2005, 12:11 PM

I checked the documentation.
No mention on the type of compressors. I believe that they are pretty flexible based on the design.

Fred T · 07-26-2005, 12:27 PM

Quote:

Originally Posted by 69Goody

I checked the documentation.
No mention on the type of compressors. I believe that they are pretty flexible based on the design.

http://www.alangrovecomponents.com/Important_Info.htm

69Goody · 07-26-2005, 06:31 PM

Thanks for the info Fred!!
Flexible as long as they are the Sanden 508....or 510 and 709.

**Ridgeback** · 07-27-2005, 11:05 AM

69Goody:

If the AC brackets are $45.00 shipped I will take them. Let me know where to send the MO. Thanks

69Goody · 07-27-2005, 11:57 AM

Quote:

Originally Posted by Ridgeback

69Goody:

If the AC brackets are $45.00 shipped I will take them. Let me know where to send the MO. Thanks

Hey Ridgeback,
$45 to your door for the AC bracket is cool.
You can send an MO to me at:

Brad Goodenough
307 County Road 120 South
South Point, OH 45680

Thanks,
Brad

**Ridgeback** · 07-27-2005, 07:12 PM

MO sent.

69Goody · 07-28-2005, 06:44 PM

Thanks...
I'll ship as soon as it get's here.

69Goody · 08-01-2005, 06:31 PM

Hey Ridgeback,
I got the MO today.
The bracket will be in the mail tomorrow morning.

Thanks!!!

jorgensensc · 08-02-2005, 02:50 PM

Do you still have the alternator brackets, and if so will you take 45 shipped to 77429? I can Paypal immediately, or send money order.
Thanks,
Shawn

69Goody · 08-02-2005, 07:28 PM

Hey jorgensensc,

45 to your door is cool.
I'll pm you my paypal.

jorgensensc · 08-02-2005, 07:50 PM

I sent you Money through Paypal. I just want to verify one last time this is for a driver side Alternator mount with a long water pump. I hope so since I already sent you the money

69Goody · 08-02-2005, 08:31 PM

It sure is.
I'd return the money if it wasn't...I'm honest.
I'll ship first thing in the morning.
Thanks again.
Brad

jorgensensc · 08-02-2005, 10:30 PM

Thanks, I look forward to recieving the brackets!! Now to find the power steering bracket I need!!

07-25-2005, 04:04 PM	#1
69Goody Registered User Join Date: Jul 2004 Location: Southern Tip of OHIO 45680 Posts: 49	For Sale: Alan Grove Components Brackets for SB LWP A/C and Alt. No Head holes needed Hey folks, I have a set of Alan Grove Components brackets for the A/C and Alternator. I bought them originally for a set of double hump heads without accessory bolt holes, but ended going a little more high-tech with a set of Edelbrock Heads and now Zoop brackets. These brackets are made of steel and are paintable to match your block or color scheme. They also work with heads w/ bolt holes...they just won't use them. $45 each or $80 for both of them. BOTH SOLD They are located in Ohio. I'll ship them UPS. __________________ Only the Mediocre are always at their best... '69 GMC LWB 406, TH400, 3.73 Posi' Things I've learned from my truck...If I was an automaker, my vehicles would be overpriced, run rough, and get 5MPG. Last edited by 69Goody; 08-03-2005 at 06:47 PM.

07-25-2005, 05:54 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	This is a smoking deal, these things are not cheap, I would buy em if I had the extra cash, anyways, TTT for ya and good luck with your sale. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-26-2005, 06:52 AM	#4
69Goody Registered User Join Date: Jul 2004 Location: Southern Tip of OHIO 45680 Posts: 49	Hey Ridgback, The part numbers are: 123R - A.C. 223L - ALT. I bought them to mount a Sanden 508. The link to their site is: http://www.alangrovecomponents.com/S.B.Long_Pump.htm The items are about half way down the page. I'll run out to my shed also and look at the paperwork and see if there was any special indication of what they could or could not fit. __________________ Only the Mediocre are always at their best... '69 GMC LWB 406, TH400, 3.73 Posi' Things I've learned from my truck...If I was an automaker, my vehicles would be overpriced, run rough, and get 5MPG.

07-26-2005, 12:11 PM	#5
69Goody Registered User Join Date: Jul 2004 Location: Southern Tip of OHIO 45680 Posts: 49	I checked the documentation. No mention on the type of compressors. I believe that they are pretty flexible based on the design. __________________ Only the Mediocre are always at their best... '69 GMC LWB 406, TH400, 3.73 Posi' Things I've learned from my truck...If I was an automaker, my vehicles would be overpriced, run rough, and get 5MPG.

07-26-2005, 06:31 PM	#7
69Goody Registered User Join Date: Jul 2004 Location: Southern Tip of OHIO 45680 Posts: 49	Thanks for the info Fred!! Flexible as long as they are the Sanden 508....or 510 and 709. __________________ Only the Mediocre are always at their best... '69 GMC LWB 406, TH400, 3.73 Posi' Things I've learned from my truck...If I was an automaker, my vehicles would be overpriced, run rough, and get 5MPG.

07-26-2005, 12:23 AM	#3
Ridgeback Senior Member Join Date: Mar 2003 Location: Virginia Posts: 809	69Goody: I am interestedin your brackets. Do you know the Grove part numbers and if the ac brackets will fit either the GM A6 compressor or a Sanden compressor? Thanks.

07-27-2005, 11:05 AM	#8
Ridgeback Senior Member Join Date: Mar 2003 Location: Virginia Posts: 809	69Goody: If the AC brackets are $45.00 shipped I will take them. Let me know where to send the MO. Thanks

07-27-2005, 07:12 PM	#10
Ridgeback Senior Member Join Date: Mar 2003 Location: Virginia Posts: 809	MO sent.

07-28-2005, 06:44 PM	#11
69Goody Registered User Join Date: Jul 2004 Location: Southern Tip of OHIO 45680 Posts: 49	Thanks... I'll ship as soon as it get's here. __________________ Only the Mediocre are always at their best... '69 GMC LWB 406, TH400, 3.73 Posi' Things I've learned from my truck...If I was an automaker, my vehicles would be overpriced, run rough, and get 5MPG.

08-01-2005, 06:31 PM	#12
69Goody Registered User Join Date: Jul 2004 Location: Southern Tip of OHIO 45680 Posts: 49	Hey Ridgeback, I got the MO today. The bracket will be in the mail tomorrow morning. Thanks!!! __________________ Only the Mediocre are always at their best... '69 GMC LWB 406, TH400, 3.73 Posi' Things I've learned from my truck...If I was an automaker, my vehicles would be overpriced, run rough, and get 5MPG.

08-02-2005, 02:50 PM	#13
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Do you still have the alternator brackets, and if so will you take 45 shipped to 77429? I can Paypal immediately, or send money order. Thanks, Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

08-02-2005, 07:28 PM	#14
69Goody Registered User Join Date: Jul 2004 Location: Southern Tip of OHIO 45680 Posts: 49	Hey jorgensensc, 45 to your door is cool. I'll pm you my paypal. __________________ Only the Mediocre are always at their best... '69 GMC LWB 406, TH400, 3.73 Posi' Things I've learned from my truck...If I was an automaker, my vehicles would be overpriced, run rough, and get 5MPG.

08-02-2005, 07:50 PM	#15
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	I sent you Money through Paypal. I just want to verify one last time this is for a driver side Alternator mount with a long water pump. I hope so since I already sent you the money __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

08-02-2005, 08:31 PM	#16
69Goody Registered User Join Date: Jul 2004 Location: Southern Tip of OHIO 45680 Posts: 49	It sure is. I'd return the money if it wasn't...I'm honest. I'll ship first thing in the morning. Thanks again. Brad __________________ Only the Mediocre are always at their best... '69 GMC LWB 406, TH400, 3.73 Posi' Things I've learned from my truck...If I was an automaker, my vehicles would be overpriced, run rough, and get 5MPG.

08-02-2005, 10:30 PM	#17
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Thanks, I look forward to recieving the brackets!! Now to find the power steering bracket I need!! __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.