Putting leaf rear on coil rear frame? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 08-04-2005, 08:09 AM

I drive the 71 now, so swapping should only be a weekend thing that my son and I can do. I will pull the front clip as a unit. Pull the cab. Pull the motor and trans and go ahead and replace the gaskets on the motor with FelPro Permadry gaskets (leaks now). Then pull the bed. I will just unbolt the front cross member and bolt in under the 69. Then mount the rear. Then swap over the brake lines and wiring. After that, its' motor/trans, cab, clip and mount the fuel cell then put the bed on.

The 71 is in awesome shape except for the bed and the ORANGE paint... It has a speed warning inst panel in it. I am trying to figure out how to get it working (missing cable and harness for it) or may trade it for a tach dash.

08-04-2005, 08:09 AM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	part I drive the 71 now, so swapping should only be a weekend thing that my son and I can do. I will pull the front clip as a unit. Pull the cab. Pull the motor and trans and go ahead and replace the gaskets on the motor with FelPro Permadry gaskets (leaks now). Then pull the bed. I will just unbolt the front cross member and bolt in under the 69. Then mount the rear. Then swap over the brake lines and wiring. After that, its' motor/trans, cab, clip and mount the fuel cell then put the bed on. The 71 is in awesome shape except for the bed and the ORANGE paint... It has a speed warning inst panel in it. I am trying to figure out how to get it working (missing cable and harness for it) or may trade it for a tach dash. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.