Finally, pictures that show the correct color - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bowtie · 08-01-2005, 12:11 PM

Nice pickup!!! Do you have any interior pics? Are you using a electric fan setup?

68cajun · 08-01-2005, 12:43 PM

Thanks for the firewall pics, looks awsome!!!!

bigblock73 · 08-01-2005, 01:17 PM

Wow, great looking truck...very impressive!!

71-longbed · 08-01-2005, 06:10 PM

First off .. your truck looks amazing .... so why didnt you clean up those rusty seat brackets ??? .... just what i noticed ..... no offense

sweet ride !!

mocwon · 08-01-2005, 09:32 PM

Quote:

Originally Posted by 71-longbed

First off .. your truck looks amazing .... so why didnt you clean up those rusty seat brackets ??? .... just what i noticed ..... no offense

sweet ride !!

Thanks. It's not finished yet, they'll get cleaned and painted.

Rdrdave · 08-02-2005, 11:34 PM

Beautiful truck! Very nice. Keep up the great work. My .02 if wanted....Not sure if it passed you by...detail that seat bracket. Very beautiful truck, love the color!

69 Short Fleet · 08-03-2005, 01:49 AM

Beautiful truck!!! Love all your choices. Doug

BowTieMan · 08-03-2005, 02:08 AM

Quote:

Originally Posted by mocwon

They fit a 1990 four-door S15 Jimmy (there's a bunch of years of four-door Jimmys and Blazers that are the same). Fit real nice and will protect the painted sill areas that always get scratched up and looking crappy. I haven't put the aluminum hold-down sills on yet that cover the edge of the carpet.

What holds those down?

mocwon · 08-03-2005, 08:07 AM

Quote:

Originally Posted by BowTieMan

What holds those down?

They come with 3M double sided tape already attached like that used on late model exterior trim and emblems.

72BlckButy · 08-03-2005, 01:07 PM

What kind of drop are you running on that truck? I love the color. If mine would only look a 10th as good.....

Hook'em · 08-03-2005, 01:59 PM

Call it what you will, that color is Burnt Orange. j/k Looks great, cant wait to see it around Austin.

mocwon · 08-03-2005, 03:05 PM

Quote:

Originally Posted by 72BlckButy

What kind of drop are you running on that truck? I love the color. If mine would only look a 10th as good.....

2-1/2" drop spindles in front with stock coils, 2" drop shackles in rear and de-arched rear leafs 2-1/4".

72BlckButy · 08-03-2005, 09:24 PM

Also, forgot to ask, what size wheels/backspacing are those?

86swb · 08-03-2005, 11:44 PM

Quote:

Originally Posted by mocwon

It's a custom mix but to my surprise it's a dead ringer for the 2005 Corvette color called Orange Sunburst, or something like that. Also, used on 2003 Hummer and 2004 Avalanche and very similar to Honda Element color.

The color is beautiful but I know it has to be $$$$ if it was for 2005 Corvette, 2003 Hummer and 2004 Avalanche. Sounds expensive anyway. Looks kinda like a brandy wine color. Is that a stop and bed light on back of your cab? Nice

Deuce · 08-04-2005, 01:19 AM

Quote:

Originally Posted by mocwon

It's a custom mix but to my surprise it's a dead ringer for the 2005 Corvette color called Orange Sunburst, or something like that. Also, used on 2003 Hummer and 2004 Avalanche and very similar to Honda Element color.

Was there not a original color close to this color??
Where did you pull your power wire to your tach from?? I'm doing a TPI 383 swap and I'm just about done. What did you use for a wiring harness??
Thanks.

krue · 08-04-2005, 02:28 AM

That is one badazz truck!

mocwon · 08-04-2005, 08:32 AM

Quote:

Originally Posted by 72BlckButy

Also, forgot to ask, what size wheels/backspacing are those?

20" American Racing 211 rims with 4" back spacing, if I recall correctly.

mocwon · 08-04-2005, 08:36 AM

Quote:

Originally Posted by Deuce

Was there not a original color close to this color??
Where did you pull your power wire to your tach from?? I'm doing a TPI 383 swap and I'm just about done. What did you use for a wiring harness??
Thanks.

I believe there was a brown offered as an original color but this is significantly different than the factory brown.

Painless wiring harness for 1986-1989 TPI with MAF was used. The white wire on the coil is the tach hookup wire for this application.

mocwon · 08-04-2005, 08:39 AM

Quote:

Originally Posted by 86swb

The color is beautiful but I know it has to be $$$$ if it was for 2005 Corvette, 2003 Hummer and 2004 Avalanche. Sounds expensive anyway. Looks kinda like a brandy wine color. Is that a stop and bed light on back of your cab? Nice

The color was not terribly expensive, less than $300/gallon. Yes, it's a third brake light from about a 1994 Chevy truck.

Deuce · 08-05-2005, 05:24 PM

Quote:

Originally Posted by mocwon

I believe there was a brown offered as an original color but this is significantly different than the factory brown.

Painless wiring harness for 1986-1989 TPI with MAF was used. The white wire on the coil is the tach hookup wire for this application.

Sorry. I meant to ask where you pulled your power wire to the Dist feed(Pink wire) from.Is it the yellow wire that used to run from the stater to the positive side of the coil??
BEAUTIFUL Truck!!!!!!!!!!!!!!!!!!!!!!!!!

mocwon · 08-05-2005, 05:40 PM

Quote:

Originally Posted by Deuce

Sorry. I meant to ask where you pulled your power wire to the Dist feed(Pink wire) from.Is it the yellow wire that used to run from the stater to the positive side of the coil??
BEAUTIFUL Truck!!!!!!!!!!!!!!!!!!!!!!!!!

That's been quite sometime ago and since I've slept since then and suffer from CRS, I'll have to check this weekend and get back to you.

08-01-2005, 12:11 PM	#26
bowtie Senior Member Join Date: Dec 1999 Location: Saskatchewan Posts: 1,050	Nice pickup!!! Do you have any interior pics? Are you using a electric fan setup? __________________ ~70 GMCprostreet swb 396/700r NOS 575 hp "the Brick" ~72 chev swb w/68 front clip "GM Millenium corvette yellow" I use and accept Paypal

08-01-2005, 12:43 PM	#27
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Thanks for the firewall pics, looks awsome!!!! __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car Last edited by 68cajun; 08-01-2005 at 12:44 PM.

08-01-2005, 01:17 PM	#28
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Wow, great looking truck...very impressive!! __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

08-01-2005, 06:10 PM	#29
71-longbed Its Magically Delicious Join Date: Jan 2003 Location: oregon Posts: 2,398	First off .. your truck looks amazing .... so why didnt you clean up those rusty seat brackets ??? .... just what i noticed ..... no offense sweet ride !! __________________ 71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee.

08-03-2005, 01:07 PM	#35
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	What kind of drop are you running on that truck? I love the color. If mine would only look a 10th as good..... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-02-2005, 11:34 PM	#31
Rdrdave Broke and still trying Join Date: Apr 2003 Location: Alameda, CA Posts: 562	Beautiful truck! Very nice. Keep up the great work. My .02 if wanted....Not sure if it passed you by...detail that seat bracket. Very beautiful truck, love the color!

08-03-2005, 01:49 AM	#32
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Beautiful truck!!! Love all your choices. Doug

08-03-2005, 01:59 PM	#36
Hook'em Senior Member Join Date: Jul 2004 Location: Round Rock, Texas Posts: 858	Call it what you will, that color is Burnt Orange. j/k Looks great, cant wait to see it around Austin. __________________ Hook'em

08-03-2005, 09:24 PM	#38
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Also, forgot to ask, what size wheels/backspacing are those? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-04-2005, 02:28 AM	#41
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	That is one badazz truck! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.