Master cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dennislbrooks** · 08-06-2005, 01:51 PM

Will a 67 master cylinder fit on a 66? I am asking about will it bolt up to the firewall and 66 rod work ok to the brake pedal? I know I will have to run a proportioning splitter block for the brake lines and redo the brake lines.

Also will 71-72 spindles fit on a 66? I can solve the outer tie rod problem.
I will be using the ball joints made for the spindle year.

thanks

zenish · 08-06-2005, 08:47 PM

i used a 67 master cylinder on my 64.i had to readjust the push rod.

**dennislbrooks** · 08-07-2005, 08:46 AM

Thanks zenish

08-06-2005, 01:51 PM	#1
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,798	Master cylinder Will a 67 master cylinder fit on a 66? I am asking about will it bolt up to the firewall and 66 rod work ok to the brake pedal? I know I will have to run a proportioning splitter block for the brake lines and redo the brake lines. Also will 71-72 spindles fit on a 66? I can solve the outer tie rod problem. I will be using the ball joints made for the spindle year. thanks

08-06-2005, 08:47 PM	#2
zenish Registered User Join Date: Aug 2003 Location: stallings,nc Posts: 401	i used a 67 master cylinder on my 64.i had to readjust the push rod. __________________ 1964 c10 short step 1962 econoline van 1989 rs camaro 2006 yamaha vino 125 1975 goldwing

08-07-2005, 08:46 AM	#3
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,798	Thanks zenish



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.