|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
08-07-2005, 04:36 PM
|
#1 |
|
Registered User
Join Date: Jul 2005
Location: centralia missouri
Posts: 123
|
the set up i checked this morning was a 74 3/4ton with a dana44 its whats left for my dana 60 swap. but i have 10 4x4 parts trucks so i know i can find what your looking for. well i was looking i seen that the 6inch ezride springs on my 74 are only 2 1/2 inch springs and the stock springs are 3 inch.the sway bar you need is for 73-79 or is it the 70-72 bar ? the frame on the 73-79 is wider than the 70-72.
|
|
|
|
08-10-2005, 04:25 PM
|
#2 |
|
Account Suspended
 
Join Date: Jun 2003
Location: PA
Posts: 1,411
|
Finally got that measurement for the front leaf springs. They are 2.5" wide, so whoever has the plates with the drilled and tapped holes in them, let me know please. Also could use the sway bar itself and the mounting brackets that go to the front crossmember. (GM might have used the same plate for 2.5" and 3" front leaf springs?? Not sure, but definitely know there is a left and right side for the Dana 44.)
Last edited by 72longbed; 08-10-2005 at 04:28 PM. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
