Approx weight of a cab? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BubbaGreen · 04-17-2002, 10:39 AM

Anybody know what the approx weight of a
C-10 cab is? With Doors, benchseat,
gastank (no gas) and no steering column.
Cab still has all the glass in it.
I want to make a stand to support it is
why i ask. Thanks all!

------------------
71 Chevy C-10 SWB Fleetside WAS:307w/3-on-the-tree NOW:350TBI/700R4/3.73
See it at www.prismnet.com/~grzanich

71402BB · 04-17-2002, 10:46 AM

You sure you want to leave all that glass in it? And the doors on it? That adds a lot of extra weight! I would have to guess with all that stuff you are leaving on it to weigh in easy at 600 pounds or so! Hell a bare cab that is compleatlly striped (just a shell) probably weighs 250-300 pounds!

------------------
71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's

72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!)

68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi

Longhorn Man · 04-17-2002, 10:58 AM

Sound about right. The doors and seat are the killers here, they are so easy to remove, I can't see a good reaon to leave them on.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

**1971Stepside** · 04-17-2002, 11:25 AM

I just got my cab completely stripped out over the weekend and I know it has to weigh around 250lbs. My next door neighbors son tried to help me lift it off the frame and we chose not to do it since I wanted it carried around the house to the basement garage. I would take the doors off for sure!

------------------
2001 GMC 2500HD Crew Cab Duramax, Allison, 4WD, Love it

1971 Chevrolet 1/2 ton 2WD Short/Step Side. In process of frame off restoration

71Chev · 04-17-2002, 12:06 PM

I had a 71 GMC cab weighed at the dump once.
With the seat, fuel tank, most all the under/behind dash parts in it, front and rear glass, no doors, no steering column.
580 pounds.

------------------

71 Chevy CST Long Fleet 350/350/3.07 leaf rear.

**TxGary** · 04-17-2002, 06:01 PM

Jeff, Got this info. from Wess when I was looking into shipping a cab. Complete cab 800 lbs. Bare cab 560 lbs. One door complete 85 lbs.

**Desert Rat** · 04-17-2002, 06:12 PM

2 strong people can carry a cab gutted,i have unloaded a bare cab out of my truck by myself slowly with the help of some boards,i even managed to get it up on the frame.But certainly pull the doors and seat,and some bigger heavy parts.

04-17-2002, 10:39 AM	#1
BubbaGreen Senior Member Join Date: Mar 2001 Location: Cedar Park, TX Posts: 686	Approx weight of a cab? Anybody know what the approx weight of a C-10 cab is? With Doors, benchseat, gastank (no gas) and no steering column. Cab still has all the glass in it. I want to make a stand to support it is why i ask. Thanks all! ------------------ 71 Chevy C-10 SWB Fleetside WAS:307w/3-on-the-tree NOW:350TBI/700R4/3.73 See it at www.prismnet.com/~grzanich __________________ 71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich

04-17-2002, 10:46 AM	#2
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	You sure you want to leave all that glass in it? And the doors on it? That adds a lot of extra weight! I would have to guess with all that stuff you are leaving on it to weigh in easy at 600 pounds or so! Hell a bare cab that is compleatlly striped (just a shell) probably weighs 250-300 pounds! ------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

04-17-2002, 11:25 AM	#4
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	I just got my cab completely stripped out over the weekend and I know it has to weigh around 250lbs. My next door neighbors son tried to help me lift it off the frame and we chose not to do it since I wanted it carried around the house to the basement garage. I would take the doors off for sure! ------------------ 2001 GMC 2500HD Crew Cab Duramax, Allison, 4WD, Love it 1971 Chevrolet 1/2 ton 2WD Short/Step Side. In process of frame off restoration __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

04-17-2002, 12:06 PM	#5
71Chev Senior Member Join Date: Dec 2000 Location: Indiana Posts: 3,074	I had a 71 GMC cab weighed at the dump once. With the seat, fuel tank, most all the under/behind dash parts in it, front and rear glass, no doors, no steering column. 580 pounds. ------------------ 71 Chevy CST Long Fleet 350/350/3.07 leaf rear. __________________ 71 Chevy CST Long Fleet 350/350/3.07 leaf rear.

04-17-2002, 06:01 PM	#6
TxGary Registered User Join Date: Jul 2001 Location: Bowie, Texas 76230 Posts: 1,059	Jeff, Got this info. from Wess when I was looking into shipping a cab. Complete cab 800 lbs. Bare cab 560 lbs. One door complete 85 lbs. __________________ 71 C-10 SWB 1969 C-30 Custom Camper Motorhome Restoration in progress. 2020 Chevy 2500 Crew 4x4 LTZ Diesel 2024 Chevy Tahoe Z71 4X4 2015 Diamond C 22' HD car hauler Bowie, Texas 76230

04-17-2002, 10:58 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Sound about right. The doors and seat are the killers here, they are so easy to remove, I can't see a good reaon to leave them on. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

04-17-2002, 06:12 PM	#7
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	2 strong people can carry a cab gutted,i have unloaded a bare cab out of my truck by myself slowly with the help of some boards,i even managed to get it up on the frame.But certainly pull the doors and seat,and some bigger heavy parts.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.