69 short coil spring frame free hurry !!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

beautimus · 08-10-2005, 09:46 AM

i have offered this frame to a couple of board members, but so far no one has shown up at my door to get it.
anyway, it was from a 69 chevy short fleet. it will roll but you gotta put it on a trailer. (no gears in the rear axle.) so come get it by monday the 15th or it gets cut up, and hauled to the dump. respond in the thread, first, please. halfway between birmingham and tuscaloosa alabama.
Tony

emmett · 08-10-2005, 11:31 AM

Tony
Does it have trailing arms? If it does and no one bites on the hole frame (this would be ashame to cut up a good frame)would you consider cutting them off and shipping to WI 54130. If you PM me your phone no. I can call you about the arms.

Thanks EMMETT

barraza · 08-10-2005, 11:47 AM

I'm interested and I am going to Cullman on sat the 13th, I could come get it then. Does it have suspension parts? Is it bent? How rusty?

beautimus · 08-10-2005, 07:30 PM

emmett,
i have a set of trailing arms i would give you if you could pick them up.
but its 35 miles to the nearest freight terminal to ship them and i don't have a lot of time right now. i think your best bet is to find a pair local to you.
shipping from here would be more expensive than you would want, anyway.

beautimus · 08-10-2005, 07:34 PM

BARRAZA,
COME ON DOWN !!!
I'll be here. bring a trailer. it is not bent anywhere as far as i can tell.
the truck it came out from under was not wrecked, just rotten.
Tony

thejoker · 08-10-2005, 08:50 PM

If Barraza doesn't want the frame I'll take it. If he doesn't want the trailing arms I would take those too.

LMK

Thanks

barraza · 08-11-2005, 10:53 AM

Tony
I sent you a PM
Louis

barraza · 08-11-2005, 10:20 PM

ttt, it is still available

08-10-2005, 09:46 AM	#1
beautimus Registered User Join Date: Mar 2002 Location: woodstock, alabama, usa Posts: 938	69 short coil spring frame free hurry !!! i have offered this frame to a couple of board members, but so far no one has shown up at my door to get it. anyway, it was from a 69 chevy short fleet. it will roll but you gotta put it on a trailer. (no gears in the rear axle.) so come get it by monday the 15th or it gets cut up, and hauled to the dump. respond in the thread, first, please. halfway between birmingham and tuscaloosa alabama. Tony __________________ i survived cancer and kidney stones, but my kids are killing me.

08-10-2005, 11:31 AM	#2
emmett Registered User Join Date: Nov 2003 Location: Kaukauna WI Posts: 193	Frame Tony Does it have trailing arms? If it does and no one bites on the hole frame (this would be ashame to cut up a good frame)would you consider cutting them off and shipping to WI 54130. If you PM me your phone no. I can call you about the arms. Thanks EMMETT __________________ Kaukauna WI Airplaines don't land here they are sucked down

08-10-2005, 07:30 PM	#4
beautimus Registered User Join Date: Mar 2002 Location: woodstock, alabama, usa Posts: 938	emmett, i have a set of trailing arms i would give you if you could pick them up. but its 35 miles to the nearest freight terminal to ship them and i don't have a lot of time right now. i think your best bet is to find a pair local to you. shipping from here would be more expensive than you would want, anyway. __________________ i survived cancer and kidney stones, but my kids are killing me.

08-10-2005, 07:34 PM	#5
beautimus Registered User Join Date: Mar 2002 Location: woodstock, alabama, usa Posts: 938	BARRAZA, COME ON DOWN !!! I'll be here. bring a trailer. it is not bent anywhere as far as i can tell. the truck it came out from under was not wrecked, just rotten. Tony __________________ i survived cancer and kidney stones, but my kids are killing me.

08-10-2005, 08:50 PM	#6
thejoker Registered User Join Date: Jun 2005 Location: Gulfport Mississippi Posts: 364	If Barraza doesn't want the frame I'll take it. If he doesn't want the trailing arms I would take those too. LMK Thanks __________________ **Have you ever danced with the devil in the pale moonlight....I ask that of all my prey** 68' C10 Short Step (rebuilding as we speak) 72' Custom Camper (wrecked, parting out) 79' C10 Fleet (rough, parting out) 97' C1500 Short Step Custom (DD) 97' Kawaski VN800a Customized 99' Z71 Silverado 04' Suzuki Volusia Last edited by thejoker; 08-10-2005 at 08:50 PM.

08-10-2005, 11:47 AM	#3
barraza Registered User Join Date: Jul 2003 Location: N. Alabama Posts: 132	I'm interested and I am going to Cullman on sat the 13th, I could come get it then. Does it have suspension parts? Is it bent? How rusty?

08-11-2005, 10:53 AM	#7
barraza Registered User Join Date: Jul 2003 Location: N. Alabama Posts: 132	Tony I sent you a PM Louis

08-11-2005, 10:20 PM	#8
barraza Registered User Join Date: Jul 2003 Location: N. Alabama Posts: 132	ttt, it is still available



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.