72 GMC 4x4 Dually? Was there such a thing? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roger0080 · 08-10-2002, 11:24 PM

This is listed in an ad for an upcoming auction.

I've never heard of a 4x4 Dually or a 1 ton 4x4 for 67-72.

Guess I'll just have to go and check it out. It's either a misprint or conversion job.

-Roger

Benrs86 · 08-10-2002, 11:35 PM

definately want to check that out. i think they made one ton 4wds, but not the dually? i could be wrong. is the auction in st paul? if i were you i would atleast go look!

Longhorn Man · 08-10-2002, 11:43 PM

67 - 72...no one ton 4X4's made at all.

Blue_71 · 08-10-2002, 11:47 PM

no 1 ton 4x4 in 67-72, and no dually 4x4, but thats from the factory.. could always be built by somebody if they wanted it

BLAZERMAN · 08-16-2002, 11:52 PM

Did you ever find out about this truck?

You could order a 1 ton 4x4 dually from any chevrolet dealer, they would send a 2 wheel drive dually cab and chassis to napco and they did the front end conversion and shipped the truck back to your dealer.

C-40 to C-60 series trucks could also be ordered with a 4x4 conversion from Howe-Coleman, they came equiped with a special full floating front differential that used the same axle shafts as the rear, they could be swapped front to back or right to left.

Longhorn Man · 08-17-2002, 12:00 AM

Quote:

Originally posted by BLAZERMAN
they came equiped with a special full floating front differential that used the same axle shafts as the rear, they could be swapped front to back or right to left.

How did it turn with the 3 1/2 foot pole going through the center of the hub?

BLAZERMAN · 08-17-2002, 12:12 AM

Dont know how they worked, especially with a centered center section, instead of being offset like all other 4x4 front axles, I'd sure like to see one in person.

**Joesjunk** · 08-17-2002, 02:17 AM

A friend of mine has a 1972 1ton dually 4x4. It was one of those napco conversions and has the strange looking front axle. It was a city truck all of its life as a tree spade truck. It is supposed to only have 9 thousand miles on it but was used and abused. If I ever get over there I will get some pics for you guys. I havent seen it for a few years. And no he wont sell it, I have tried. He bought it from the city for $3500.00 about 5 years ago.

chevy2racr · 08-17-2002, 05:00 PM

I bet that sh*t looks weird!

08-10-2002, 11:24 PM	#1
roger0080 Registered User Join Date: Nov 2000 Location: Carver County, Minnesota, USA Posts: 626	72 GMC 4x4 Dually? Was there such a thing? This is listed in an ad for an upcoming auction. I've never heard of a 4x4 Dually or a 1 ton 4x4 for 67-72. Guess I'll just have to go and check it out. It's either a misprint or conversion job. -Roger __________________ 72 Chev C-10 90% restored (former AZ truck) ... 71 Chev K-20 Cheyenne my vacation crusier... 72 Chev C-10 Now retired and striped after many faithful miles... 72 GMC 1500 Retired to the junk yard after bought new in '71...

08-10-2002, 11:35 PM	#2
Benrs86 Registered User Join Date: Feb 2000 Location: Brandon, SD, USA Posts: 1,292	definately want to check that out. i think they made one ton 4wds, but not the dually? i could be wrong. is the auction in st paul? if i were you i would atleast go look! __________________ Brandon, SD 69 GMC 1/2 ton 2wd wide long bed with wood 3 on the tree 350 engine 4 bolt main rv cam AIM = Alphray04

08-16-2002, 11:52 PM	#5
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Did you ever find out about this truck? You could order a 1 ton 4x4 dually from any chevrolet dealer, they would send a 2 wheel drive dually cab and chassis to napco and they did the front end conversion and shipped the truck back to your dealer. C-40 to C-60 series trucks could also be ordered with a 4x4 conversion from Howe-Coleman, they came equiped with a special full floating front differential that used the same axle shafts as the rear, they could be swapped front to back or right to left. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C Last edited by BLAZERMAN; 08-16-2002 at 11:56 PM.

08-17-2002, 12:12 AM	#7
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Dont know how they worked, especially with a centered center section, instead of being offset like all other 4x4 front axles, I'd sure like to see one in person. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

08-17-2002, 02:17 AM	#8
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,689	A friend of mine has a 1972 1ton dually 4x4. It was one of those napco conversions and has the strange looking front axle. It was a city truck all of its life as a tree spade truck. It is supposed to only have 9 thousand miles on it but was used and abused. If I ever get over there I will get some pics for you guys. I havent seen it for a few years. And no he wont sell it, I have tried. He bought it from the city for $3500.00 about 5 years ago. __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

08-10-2002, 11:43 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	67 - 72...no one ton 4X4's made at all.

08-17-2002, 05:00 PM	#9
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	I bet that sh*t looks weird! __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.