coil spring insulators (front) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Batmat · 08-14-2005, 10:29 AM

I am currently rebuilding the front end of my 1971 short bed project. I need to know if coil spring insulators are required. I have received conflicting info. from others about this. I know that the truck did not have anything when it was disassembled, but that doesn't always mean anything. If I need them (or if it's a good upgrade) does anyone know any good vendors? I would prefer poly. if I can get them.

Tx Firefighter · 08-14-2005, 01:32 PM

I've never seen them on a GM truck, only Ford products.

Izzy · 08-14-2005, 08:22 PM

I only know 88-98 trucks used them. Top and bottom.

Batmat · 08-16-2005, 07:02 PM

Thanks for the imput. I would rather find out now rather than after I put the front end back together.

Joe67 · 08-16-2005, 07:56 PM

I started a thread about this very topic last fall and it was determined no pads or insulators were used

08-14-2005, 10:29 AM	#1
Batmat Registered User Join Date: Mar 2005 Location: Las Vegas, NV Posts: 28	coil spring insulators (front) I am currently rebuilding the front end of my 1971 short bed project. I need to know if coil spring insulators are required. I have received conflicting info. from others about this. I know that the truck did not have anything when it was disassembled, but that doesn't always mean anything. If I need them (or if it's a good upgrade) does anyone know any good vendors? I would prefer poly. if I can get them.

08-14-2005, 01:32 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I've never seen them on a GM truck, only Ford products. __________________ I'm on the Instagram- @Gearhead_Kevin

08-14-2005, 08:22 PM	#3
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	I only know 88-98 trucks used them. Top and bottom. Last edited by Izzy; 08-15-2005 at 09:37 AM.

08-16-2005, 07:56 PM	#5
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	I started a thread about this very topic last fall and it was determined no pads or insulators were used __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

08-16-2005, 07:02 PM	#4
Batmat Registered User Join Date: Mar 2005 Location: Las Vegas, NV Posts: 28	Thanks for the imput. I would rather find out now rather than after I put the front end back together.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.