HOW DO I INSTALL A PUSH BUTTON STARTER - The 1947 - Present Chevrolet & GMC Truck Message Board Network

O'l Buck · 04-18-2002, 12:01 AM

if the connectors are corroded and the wires are OK, a neat trick I learned is spray them with ether, that's right, ether. It will polish the brass in short order. WARNING!!!make sure the ether is dry before connecting and trying to engergize!!!!! If you decide to go with a push button, I'd make sure you get at least a 15 amp switch.

------------------
Ol' Buck: '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84
ralleys and 31/10.5s

Angel girl: 67 Cutlass convertible
330, 3spd stick

Greener: 90 GMC Jimmy
350/auto
Chad Stephens
Orleans,NE

no name yet: 72 442 under serious construction

04-18-2002, 12:01 AM	#6
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	if the connectors are corroded and the wires are OK, a neat trick I learned is spray them with ether, that's right, ether. It will polish the brass in short order. WARNING!!!make sure the ether is dry before connecting and trying to engergize!!!!! If you decide to go with a push button, I'd make sure you get at least a 15 amp switch. ------------------ Ol' Buck: '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84 ralleys and 31/10.5s Angel girl: 67 Cutlass convertible 330, 3spd stick Greener: 90 GMC Jimmy 350/auto Chad Stephens Orleans,NE no name yet: 72 442 under serious construction __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.