Big Block Motor Mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blazerb61 · 08-20-2005, 10:34 AM

I have seen alot of you talking about big block motor mounts Do they make the motor set in a 72 blazer diffrently Dont mean to sound stupid but I used my small block motor mounts and havent had any problems I was just curious Thanks

**Classic Heartbeat** · 08-20-2005, 12:08 PM

No such thing as big block motor mounts for a 4X4 Chevy/GMC from 1967 to 1972. WES www.ClassicHeartbeat.com

midyearvet@aol. · 08-20-2005, 02:20 PM

I hate to say this, But I have a set of 67 to 71 style mounts in my pick up.
Not factory though. It took a lot of work & I had to make a fixture to make sure everything was in alignment, But I mated a set of 4X4 mounts & big block mounts together. A little cutting & a lot of welding & grinding & they look like factory big block 4X4 motor mounts. I've had a 427 in my truck for about 35 years now & everytime I would look at the small block mounts, they would be in 2 pieces. I have now put an end to that.

Rick / Napa, Ca.

**Classic Heartbeat** · 08-20-2005, 04:32 PM

You can also bolt an engine crossmember out of a 73 and newer 4X4 then use the big block mounts. WES www.ClassicHeartbeat.com

midyearvet@aol. · 08-20-2005, 07:45 PM

Thanks for the info Wes. Next time I wouldn't have to waste so much energy. But I do like my mounts. Another thing I did years ago was to double flange the engine X member on both sides just below where the two pieces bolt together. I don't have to jack motor up and pull X member to drop the pan. Just unbolt 3 bolts on both sides of the U shaped piece at the bottom of the X member and the pan will come right out.

Rick / Napa, Ca.

Blazerb61 · 08-20-2005, 08:10 PM

Thanks so much

08-20-2005, 10:34 AM	#1
Blazerb61 Registered User Join Date: Aug 2005 Location: Davenport Iowa Posts: 115	Big Block Motor Mounts I have seen alot of you talking about big block motor mounts Do they make the motor set in a 72 blazer diffrently Dont mean to sound stupid but I used my small block motor mounts and havent had any problems I was just curious Thanks

08-20-2005, 12:08 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	No such thing as big block motor mounts for a 4X4 Chevy/GMC from 1967 to 1972. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

08-20-2005, 02:20 PM	#3
midyearvet@aol. Registered User Join Date: Jun 2003 Location: Napa, Ca. Posts: 103	Big Block Motor Mounts in 4X4 I hate to say this, But I have a set of 67 to 71 style mounts in my pick up. Not factory though. It took a lot of work & I had to make a fixture to make sure everything was in alignment, But I mated a set of 4X4 mounts & big block mounts together. A little cutting & a lot of welding & grinding & they look like factory big block 4X4 motor mounts. I've had a 427 in my truck for about 35 years now & everytime I would look at the small block mounts, they would be in 2 pieces. I have now put an end to that. Rick / Napa, Ca.

08-20-2005, 04:32 PM	#4
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	You can also bolt an engine crossmember out of a 73 and newer 4X4 then use the big block mounts. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

08-20-2005, 07:45 PM	#5
midyearvet@aol. Registered User Join Date: Jun 2003 Location: Napa, Ca. Posts: 103	BB Motor mounts in 4X4 Thanks for the info Wes. Next time I wouldn't have to waste so much energy. But I do like my mounts. Another thing I did years ago was to double flange the engine X member on both sides just below where the two pieces bolt together. I don't have to jack motor up and pull X member to drop the pan. Just unbolt 3 bolts on both sides of the U shaped piece at the bottom of the X member and the pan will come right out. Rick / Napa, Ca.

08-20-2005, 08:10 PM	#6
Blazerb61 Registered User Join Date: Aug 2005 Location: Davenport Iowa Posts: 115	Thanks so much



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.