Helping out GMC Junkie - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mudder · 07-29-2005, 06:22 PM

Pkg 3???? What size socket set Jodie? Is it a complete set? 1/4 " 3/8" or 1/2" drive? Sounds like you are getting a good start.

Check with Sears. Sometimes they have small tool sets with all three socket sets and wrenches for under 100 bucks.

GMCjunkie · 07-29-2005, 06:37 PM

Randy, its a craftsman 3/8 drive metric set, sizes 10--18 mm

sdkid · 07-29-2005, 07:01 PM

Its just cool to see a gal that has an interest in old vehicles of any kind. Not to mention one that actually has an interest in working on it hereslf. Everyone needs a little coaching now and then. You have plenty of friends here for that, as you already know. Glad to see your getting dirty already.

BTW, I found the 4th prybar of the set, and I'll get it mailed as soon as I can.

Longhorn Man · 07-29-2005, 07:54 PM

Jodie, I am getting ready to send out the tool box now. Not as many cards/money orders have made it here as I had expected... but I will forward the ones that show up to you weekly.

al's71gmc · 07-29-2005, 11:46 PM

hi jodie, pm sent. the outpouring from board members here is......!!!!
al

GloryHound · 07-30-2005, 08:31 AM

If I get an address I can add a complete 1/4" drive craftsman socket set.
a set of open/box end craftsmen wrenches from I think 1/4" to 3/4" and the metric up to 19mm.
I also have an almost complete set of 3/8" sockets and some extra 1/2" stuff.
If she wears medium gloves I have an new pair of mechanix "type" work gloves.(get them from work)
I have an old single speed 3/8" electric drill
and could probably did up a couple of extra screw drivers.
Also I've seen she already has 3/8" ratchets but I have a couple of made in taiwan 1/2" ratchets but I would use gloves with them(I haven't had one of these let go on me but I have had some cheap 3/8" let go and ended up with some nice knuckle scrapes for it.)

Longhorn Man · 07-30-2005, 04:32 PM

PM sent Dave....I ment to respond to your PM a couple days ago.

GMCjunkie · 07-31-2005, 07:15 AM

THANK YOU!!! To my 'PayPal' friend... You know who you are!!!

GMCjunkie · 08-01-2005, 07:38 AM

Another "PayPal" friend, Yalls kindness is so much appreciated!! THANK YOU!!

panhandler62 · 08-01-2005, 10:53 AM

I should have taken pictures of my shop helper..

My 10yo daughter gets vast joy out of running the sander on my truck!

Try making the Burb a family affair... it makes the work 10 times more fun.

bestchevyfan · 08-02-2005, 05:54 AM

Need To Keep It Near The Top.also Make Us A List Jodie, So We Will Know What Not To Mail To You. Later,buddy

GMCjunkie · 08-02-2005, 07:47 AM

Buddy, I have been keeping a running list as things come in, it just got lost a page back, lol.
Rec'd another pkg yesterday...

Pkg 4. 2 philips, 2 flat head screw drivers-reg, pliers-needle nosed pliers-3/4 and 5/8 and 9/16 wrenches-wratchet and sockets ranging from 1/2 to 1 1/4.-pocket knife.

Quote:

Originally Posted by GMCjunkie

Hey y'all!!

Im sorry it has taken so long for me to do this, but Im gonna try to keep a runnin list of what some of yall have been kind enough to send me. I am NOT going to put names with packages, just incase the sender does not want his/her name mentioned,if you sent it, feel free to say "I SENT THAT" lol

1. 3 1/2 ton floor jack and stands

2. 1/4 sheet finishing sandeer

3. Digital camera

4. Pkg 1. Asst. wire ties-roll of wire-file-3/flathead,2/phillips screw drivers- screwdriver w/ different bits-razor blades-small vice grips-wire cutter/strippers.

5. Pkg 2. Drop cord & light-2 ball peane hammers-roll of electrical tape-roll of teflon tape-gear sealant-3(different sizes) pry bars-protective eye goggles-3 snap on saw blades.

6. Pkg 3. Socket set with rachet-voltage meter? (I think)- air drill.

7. My PayPal friend, you know who you are,

8. Home Depot card, you know who you are, came in the mail today, the card was very funny too!!

If anything else comes, Ill add it to this list. Ive said it before, Ill say it again...... The mere words, "Thank You" just dont seem to get it. Yall just cant imagine what this all means to me. A few of the items Ive already used. Thank you ALL for your kindness and caring!!
take care
junk

GloryHound · 08-03-2005, 04:41 PM

1/4" drive Craftsman ratchet set SAE.
Craftsman hand wrench set (SAE and Metric).
Craftsman sockets 1/4", 3/8", and some 1/2": deep and regular: SAE and Metric.
Needle nose, Lineman, and Basic Pliers.
1/2" drive ratchet
Pair of gloves.
couple random screw drivers
Craftsman allen wrench set.

All shipped out today. Let me know when they get there. Sorry I could not get the drill in the box and it is a cheap one so it isn't worth the cost of shipping by itself.

If my work or personal travels take me into your area I expect to see a project getting worked on or finished and a cold beer waiting.

Kurt L · 08-05-2005, 01:20 AM

i sent ya a pm did ya get it?

Mudder · 08-05-2005, 02:20 AM

Jodie's computer got hit by lightning. Stay tuned. She has no way of getting online at this time. I am not sure how long it will be before she is back.

http://67-72chevytrucks.com/vboard/s....php3?t=167140

GMC69 · 08-17-2005, 11:55 AM

Well it has been almost 2 weeks since any kind of update, and it was falling down pretty far in the posts.

Does anyone know if she has found a replacement PC yet??

Just wanted to keep this up top for everyone to read.

lux hauler · 08-17-2005, 12:33 PM

http://67-72chevytrucks.com/vboard/s....php3?t=167918

bestchevyfan · 08-22-2005, 06:29 AM

Tttt

07-29-2005, 06:22 PM	#101
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Pkg 3???? What size socket set Jodie? Is it a complete set? 1/4 " 3/8" or 1/2" drive? Sounds like you are getting a good start. Check with Sears. Sometimes they have small tool sets with all three socket sets and wrenches for under 100 bucks. Last edited by Mudder; 07-29-2005 at 06:23 PM.

07-29-2005, 06:37 PM	#102
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Randy, its a craftsman 3/8 drive metric set, sizes 10--18 mm __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

07-29-2005, 07:01 PM	#103
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Its just cool to see a gal that has an interest in old vehicles of any kind. Not to mention one that actually has an interest in working on it hereslf. Everyone needs a little coaching now and then. You have plenty of friends here for that, as you already know. Glad to see your getting dirty already. BTW, I found the 4th prybar of the set, and I'll get it mailed as soon as I can. __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster Last edited by sdkid; 07-29-2005 at 08:14 PM.

07-29-2005, 11:46 PM	#105
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	hi jodie, pm sent. the outpouring from board members here is......!!!! al __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

07-31-2005, 07:15 AM	#108
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	THANK YOU!!! To my 'PayPal' friend... You know who you are!!! __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

07-29-2005, 07:54 PM	#104
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Jodie, I am getting ready to send out the tool box now. Not as many cards/money orders have made it here as I had expected... but I will forward the ones that show up to you weekly.

07-30-2005, 08:31 AM	#106
GloryHound Working on a Nova. Join Date: Nov 2002 Location: ## Posts: 506	If I get an address I can add a complete 1/4" drive craftsman socket set. a set of open/box end craftsmen wrenches from I think 1/4" to 3/4" and the metric up to 19mm. I also have an almost complete set of 3/8" sockets and some extra 1/2" stuff. If she wears medium gloves I have an new pair of mechanix "type" work gloves.(get them from work) I have an old single speed 3/8" electric drill and could probably did up a couple of extra screw drivers. Also I've seen she already has 3/8" ratchets but I have a couple of made in taiwan 1/2" ratchets but I would use gloves with them(I haven't had one of these let go on me but I have had some cheap 3/8" let go and ended up with some nice knuckle scrapes for it.)

07-30-2005, 04:32 PM	#107
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	PM sent Dave....I ment to respond to your PM a couple days ago.

08-01-2005, 07:38 AM	#109
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Another "PayPal" friend, Yalls kindness is so much appreciated!! THANK YOU!! __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

08-01-2005, 10:53 AM	#110
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,763	I should have taken pictures of my shop helper.. My 10yo daughter gets vast joy out of running the sander on my truck! Try making the Burb a family affair... it makes the work 10 times more fun. __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

08-02-2005, 05:54 AM	#111
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Helping A Member Need To Keep It Near The Top.also Make Us A List Jodie, So We Will Know What Not To Mail To You. Later,buddy

08-03-2005, 04:41 PM	#113
GloryHound Working on a Nova. Join Date: Nov 2002 Location: ## Posts: 506	1/4" drive Craftsman ratchet set SAE. Craftsman hand wrench set (SAE and Metric). Craftsman sockets 1/4", 3/8", and some 1/2": deep and regular: SAE and Metric. Needle nose, Lineman, and Basic Pliers. 1/2" drive ratchet Pair of gloves. couple random screw drivers Craftsman allen wrench set. All shipped out today. Let me know when they get there. Sorry I could not get the drill in the box and it is a cheap one so it isn't worth the cost of shipping by itself. If my work or personal travels take me into your area I expect to see a project getting worked on or finished and a cold beer waiting.

08-05-2005, 01:20 AM	#114
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	i sent ya a pm did ya get it?

08-05-2005, 02:20 AM	#115
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Jodie's computer got hit by lightning. Stay tuned. She has no way of getting online at this time. I am not sure how long it will be before she is back. http://67-72chevytrucks.com/vboard/s....php3?t=167140 Last edited by Mudder; 08-05-2005 at 02:45 AM.

08-17-2005, 11:55 AM	#116
GMC69 Registered User Join Date: Jul 2003 Location: Sudbury, Ontario, Canada Posts: 734	Well it has been almost 2 weeks since any kind of update, and it was falling down pretty far in the posts. Does anyone know if she has found a replacement PC yet?? Just wanted to keep this up top for everyone to read. __________________ Mike Email: Click here to email me -- 2019 Silvedrado 4x4 1970 Chevy 3/4 ton, 396BB, on air bags



Register or Log In To remove these advertisements.

08-17-2005, 12:33 PM	#117
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	http://67-72chevytrucks.com/vboard/s....php3?t=167918 __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

08-22-2005, 06:29 AM	#118
bestchevyfan Registered User Join Date: Jun 2002 Location: new market, alabama Posts: 1,330	Top Tttt

Register or Log In To remove these advertisements.