Removing plastic over factory retractor? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 08-23-2005, 09:00 AM

I have a parts truck that has really nice original belts. I want to put them in my truck. I don't know how to get the plastic cover off? I don't want to break it and I know it will come off.

HeavyD · 08-23-2005, 01:25 PM

With all mine I just extended the belt out a little and pulled the plastic the plastic cover straight out (toward the buckle end). It came with no problems, but maybe it was broken?? On a few sets this is all I have had to do.

sdkid · 08-23-2005, 01:51 PM

Does anyone make new covers for the retractors?

**John Fabris** · 08-23-2005, 02:17 PM

You have to spread the bottom of the plastic housing outward as you pull up on the housing. It is not easy to do if the housing is hard and not flexable. I have have some come off instantly, others have taken 10-15 minutes of wiggling and pulling. (boy that last sentence almost sounds nasty...)

08-23-2005, 09:00 AM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Removing plastic over factory retractor? I have a parts truck that has really nice original belts. I want to put them in my truck. I don't know how to get the plastic cover off? I don't want to break it and I know it will come off. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear Last edited by fade94; 08-23-2005 at 09:01 AM.

08-23-2005, 01:25 PM	#2
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	With all mine I just extended the belt out a little and pulled the plastic the plastic cover straight out (toward the buckle end). It came with no problems, but maybe it was broken?? On a few sets this is all I have had to do. __________________ "You can take the man out of PA, but you can't take PA out of the man"

08-23-2005, 01:51 PM	#3
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Does anyone make new covers for the retractors? __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster Last edited by sdkid; 08-23-2005 at 01:52 PM.

08-23-2005, 02:17 PM	#4
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	You have to spread the bottom of the plastic housing outward as you pull up on the housing. It is not easy to do if the housing is hard and not flexable. I have have some come off instantly, others have taken 10-15 minutes of wiggling and pulling. (boy that last sentence almost sounds nasty...) __________________ John Fabris 67 C10 SWB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.