|
08-25-2005, 05:30 PM
|
#1 |
|
Registered User
Join Date: Mar 2005
Location: tampa florida
Posts: 776
|
Brake Boot Question
The rubber boot on my brake rod to master cyl. was gone and hot air was coming in the truck. Got a new one. It has 5 holes in it! Am I missing something? how is that going to seal off the air leak? Also, which way does this go in, holes in or out. I thought this was going to be a quick simple job but I can't believe what I've gotten into.
 Its a 72 chebbie k10 with power brakes.
|
|
|
|
08-25-2005, 06:30 PM
|
#2 |
|
Senior Member
 
Join Date: Jan 2005
Location: Claremore, OK 74017
Posts: 2,639
|
I think maybe the holes go inside and are used to maybe help it compress as you push it from the firewall side.
__________________
68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4 |
|
|
|
|
08-25-2005, 07:11 PM
|
#3 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
There are two boots on the power brake setup. One goes onto the booster and it has holes in it. The other boot fits into the firewall and the booster rod fits into the boot. It only has the rod hole so everything is sealed.
GMC Paul has the correct boot, it is PN 360354. Here is a link. http://www.gmcpauls.com/brakes_2.htm Jim |
|
|
|
|
08-25-2005, 08:36 PM
|
#4 |
|
Registered User
Join Date: Mar 2005
Location: tampa florida
Posts: 776
|
thanks Jim K. I knowed they was more to it.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
