|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-26-2005, 08:34 PM
|
#1 |
|
Tightwad
Join Date: Jun 2005
Location: Louisiana
Posts: 408
|
Need measurements of blazer tank!!
I am looking for the measurements for the blazer tank that fits the trucks best? Could some of yall help me out? I have a swb step side.
Thanks, Eric |
|
|
|
08-27-2005, 09:37 AM
|
#2 |
|
Senior Member
Join Date: Jun 2001
Location: Shelbyville, KY
Posts: 3,261
|
Any 69-72 blazer tank will fit under any stock 67-72 truck bed but you will have to remove the spare ----hardware---and if fleetside, cut the lower portion of the floor support. they basically will bolt up to the frame between the crossmembers. You will need to decide where to arrange the filler. Pretty easy upgrade.
|
|
|
|
|
08-27-2005, 03:17 PM
|
#3 |
|
Registered User
Join Date: Apr 2004
Location: Calgary, Alberta,Canada
Posts: 1,595
|
I posted some pics on here somewhere entitled "Blazer tank pics" My truck is a 67 swb stepper.
__________________
I know what your thinking.......I have ESPN.  Sometimes it's easier to do things the hard way.  Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!! 
|
|
|
|
|
08-27-2005, 03:20 PM
|
#4 |
|
Registered User
Join Date: Apr 2004
Location: Calgary, Alberta,Canada
Posts: 1,595
|
__________________
I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!
|
|
|
|
|
08-27-2005, 07:37 PM
|
#5 |
|
DON'T TREAD ON ME
 
Join Date: May 2005
Location: Crosby County, TX
Posts: 989
|
I pulled a tank off a '71 Blazer and mounted it under the bed of my '70 LBS. Later when the tank finally wore out completly, I replaced it with a JC Whitney tank which fit right up.
FWIW, I plumbed the fuel inlet out the rear of the left fender using the inlet and gromet from off the old Blazer. Looks like it was built that way. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
