The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-28-2005, 07:28 PM   #1
red86chevy
Registered User
 
Join Date: Jun 2005
Location: sc
Posts: 77
Transmission leak Please help

Ok here is my problem... After lowering my '86 2" in the rear only I developed a transmission leak. (dont know if lowering had anything to do with it or not)

It is a th350 (non lock up... I took it out and built a regular th350 for it about 6 months ago). It is leaking out of the yolk. There is a little hole in the middle of the yolk where it slides up into the transmission. The fluid is running out of this hole, running down the u-joint and dripping off. The seal itself is not leaking at all. What would cause this? I built the tranny myself with some help. It probably only has about 800 miles on it. Should there be this much fluid in the tailshaft housing? What would allow this to happen. It has been leak free until now. It is a pretty steady drip...drip...drip...drip even while sitting still.

Thanks for any help
Jeremy
__________________
86 c-10 383 w/ sportsman II heads comp 286h cam Edlbrock RPM Performer intake Holley 750 th350 w/2400 stall 3.73 gears with powertrax No-Slip posi unit. Just broken in good. Will get a 1/4 time this week.
red86chevy is offline   Reply With Quote
Old 08-28-2005, 07:32 PM   #2
Slonaker
Insert Witty Text Here
 
Slonaker's Avatar
 
Join Date: Oct 2002
Location: San Antonio, TX
Posts: 3,415
http://www.73-87.com/7387garage/drivetrain/yokeleak.htm

I had the same problem with mine. The above article explains how to fix it.

Edit: A small change in angle makes a big difference. Mine would leak in my driveway one direction, but was fine when backed in. My driveway is almost completely flat.

The local auto parts stores were no help with the parts, but the dealer had no problem.

Slonaker
__________________
'86 Chevy C10 (Sold 04/19/13 )
Stock '01 Silverado

Last edited by Slonaker; 08-28-2005 at 07:34 PM.
Slonaker is offline   Reply With Quote
Old 08-28-2005, 09:16 PM   #3
red86chevy
Registered User
 
Join Date: Jun 2005
Location: sc
Posts: 77
Thank you! I'm glad It'll be an easy fix. Thanks for the information. It was very helpful!

Thanks,
Jeremy
__________________
86 c-10 383 w/ sportsman II heads comp 286h cam Edlbrock RPM Performer intake Holley 750 th350 w/2400 stall 3.73 gears with powertrax No-Slip posi unit. Just broken in good. Will get a 1/4 time this week.
red86chevy is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:53 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com