FS-72 Cab w/bucket seats, console, doors, interior-WA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PICKMUP** · 07-29-2005, 11:42 PM

Truck didn't sell on the board, so I will offer the main parts as a package:
All original Cab with black interior, bucket seats and console with the correct factory bracing under the floor, nice rust free doors (no holes from rust, mirrors, or speakers), black belts, door panels, visors, PB booster, etc.
These are the pieces to build a nice truck///SWB maybe? or???

$1,500...

**PICKMUP** · 07-30-2005, 10:16 PM

...and I am including everything as it came originally: am radio, heater control, wire harness, dash cluster, etc...Sit it on---plug it in---and GO!

byrd · 07-30-2005, 11:48 PM

What about the rockers, floors, and kick panels? Do you have any idea what it would cost? or are you even interested in shipping the cab? to Louisville, Ky 40272 ? Thanks, Randy

**PICKMUP** · 07-31-2005, 12:08 AM

Rockers are very good with only small rust on top by the door seals. 1" bottom of kicks is only rust inside. None on firewall. Cab supports nice. Pinhole in cab corner. WS area looks good. A little rust under back window rubber at bottom.
I can load, if you find a shipper.

HOTFUN · 07-31-2005, 01:46 PM

Frank
Just curious. Were those factory buckets listed on the glove box label and it was a Custom 10 model? I wish I had a way to get that to me reasonably too.
Thanks
Mark

dave666693 · 08-01-2005, 09:40 AM

would you be interested in selling just the seats? If so, how much?

blazerparts · 08-01-2005, 10:08 AM

$300 for the buckets and console?

**PICKMUP** · 08-01-2005, 11:52 AM

Buckets-$400/new foam for one seat-$200/new covers-$200: PACKAGE DEAL $750.
Console extra.
Pick them up here.

**PICKMUP** · 08-02-2005, 12:48 AM

...or I can box & ship seats/foam/covers for about $100---lower US.
You can have a choice of 69-70 or 71-2 seats and choice of colors on the covers...even upgrade to houndstooth for a little more.

**D.PASSMORE** · 08-29-2005, 03:20 PM

Frank,
I wish you were 2 milies closer.

I would be right over...

07-29-2005, 11:42 PM	#1
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	FS-72 Cab w/bucket seats, console, doors, interior-WA Truck didn't sell on the board, so I will offer the main parts as a package: All original Cab with black interior, bucket seats and console with the correct factory bracing under the floor, nice rust free doors (no holes from rust, mirrors, or speakers), black belts, door panels, visors, PB booster, etc. These are the pieces to build a nice truck///SWB maybe? or??? $1,500... Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

07-30-2005, 10:16 PM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Complete package ...and I am including everything as it came originally: am radio, heater control, wire harness, dash cluster, etc...Sit it on---plug it in---and GO! __________________ Email: frankeham@comcast.net Phone: 360-956-7170

07-31-2005, 12:08 AM	#4
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Rockers are very good with only small rust on top by the door seals. 1" bottom of kicks is only rust inside. None on firewall. Cab supports nice. Pinhole in cab corner. WS area looks good. A little rust under back window rubber at bottom. I can load, if you find a shipper. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

07-31-2005, 01:46 PM	#5
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Frank Just curious. Were those factory buckets listed on the glove box label and it was a Custom 10 model? I wish I had a way to get that to me reasonably too. Thanks Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

08-01-2005, 10:08 AM	#7
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	$300 for the buckets and console? __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater

08-01-2005, 09:40 AM	#6
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	would you be interested in selling just the seats? If so, how much?

08-01-2005, 11:52 AM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Buckets-$400/new foam for one seat-$200/new covers-$200: PACKAGE DEAL $750. Console extra. Pick them up here. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

08-02-2005, 12:48 AM	#9
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	...or I can box & ship seats/foam/covers for about $100---lower US. You can have a choice of 69-70 or 71-2 seats and choice of colors on the covers...even upgrade to houndstooth for a little more. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

08-29-2005, 03:20 PM	#10
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Your Cab... Frank, I wish you were 2 milies closer. I would be right over... __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.