one piece side glass - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

loblazer · 08-31-2005, 07:51 PM

Will they offer tinted? Or dark tint?

Thanks for all your work and perseverance.

Doug

SCOTI · 08-31-2005, 08:00 PM

Geezus Krist guys . . ..... let's cut the dude some slack.

I've also heard the same info & then not seen a finished product. I believe I'll just wait & see what happens w/o insulting him. If it doesn't happen, no big deal.

Case in point: You would think a company that builds suspension parts, specifically a-arms, could make a set for these trucks in little to no time to sell to the general public.

When I learned AirRide was going to make tubular arms for these trucks, it was almost 2yrs before the first production run was actually built. They didn't supply pics either, but eventually I got some.

Patience grasshoppers.

**N2TRUX** · 08-31-2005, 08:43 PM

Quote:

Originally Posted by SCOTI

....Patience grasshoppers.

Sound advice master Scoti....

*iceman7329* · 08-31-2005, 08:48 PM

Quote:

Originally Posted by SCOTI

Geezus Krist guys . . ..... let's cut the dude some slack.

I've also heard the same info & then not seen a finished product. I believe I'll just wait & see what happens w/o insulting him. If it doesn't happen, no big deal.

Case in point: You would think a company that builds suspension parts, specifically a-arms, could make a set for these trucks in little to no time to sell to the general public.

When I learned AirRide was going to make tubular arms for these trucks, it was almost 2yrs before the first production run was actually built. They didn't supply pics either, but eventually I got some.

Patience grasshoppers.

Thanks Scoti, and this will be avalible to the public soon if they can get the windows to move up and down fully without modifying the doors.

*iceman7329* · 08-31-2005, 08:52 PM

Quote:

Originally Posted by LOHRTBT

LIke they have said many times this exact post has come up and the poster magically disappears shortly after never to be heard from again.

I have been here the whole time, I didnt go anywhere.

*1FaastC10* · 08-31-2005, 08:57 PM

YET. lets see some teaser shots if they're so far along.

im curious how a 16 year old has connections like this, yet there are many more who have been into building trucks for 10 years or more, and they havent come up with a solution yet.

*iceman7329* · 08-31-2005, 09:01 PM

Quote:

Originally Posted by 1FaastC10

im curious how a 16 year old has connections like this, yet there are many more who have been into building trucks for 10 years or more, and they havent come up with a solution yet.

My mother work there about two years ago. So theres my "connections".

*iceman7329* · 08-31-2005, 09:07 PM

And by the way 1FaastC10 what the f*ck happened to the clear tail lights? Yea, thats a good one aint it? I dont think you can get them, who would of figured that, you havent given an update on those either, but your still working on them arent you? Yea I dont think so.

SCOTI · 08-31-2005, 09:32 PM

Quote:

Originally Posted by iceman7329

And by the way 1FaastC10 what the f*ck happened to the clear tail lights? Yea, thats a good one aint it? I dont think you can get them, who would of figured that, you havent given an update on those either, but your still working on them arent you? Yea I dont think so.

Comments like that don't help your position either. Patience was meant for everyone.

*iceman7329* · 08-31-2005, 09:53 PM

Scoti, I know it doesnt help but he always has something negative to say and he p*ssed me off.

86 GMG · 08-31-2005, 09:53 PM

WELL LIKE THE TITLE SAYES DO THAT AND

86 GMG · 08-31-2005, 10:02 PM

Iceman The One Thing That Comes To My Mind Is You Are Sixteen And Apparently Very Modivated Towrds Vehicles That Really Inpresses Me Im 26 And Really Didnt Get Addicted Until About 18 Or 19 I Thing You Are Serious About This So Keep Up The Good Work And Hopefully In February Give Or Take You Can Prove Me And Everyone Else We Were Wrong About You And Remimber Stand Up For Your When You Believe With Out A Dowt That Your Right

milehightoyz · 08-31-2005, 10:31 PM

in dont know what age has to do with anything here....iceman is onto something really good here.....what does it matter if hes 16 or 60...hes working on it and most of us here are anxious to see what he comes up with...dont knock a man for tryin..

1987 Shortwide · 08-31-2005, 11:05 PM

Age means nothing... If I wouldve offered to do some custom work on a guys car when I was 15 years old, they would've laughed in my face......UNTIL they saw the work. If you're getting somewhere, keep at it man.

bodydropped · 08-31-2005, 11:41 PM

Quote:

Originally Posted by 1FaastC10

YET. lets see some teaser shots if they're so far along.

im curious how a 16 year old has connections like this, yet there are many more who have been into building trucks for 10 years or more, and they havent come up with a solution yet.

at the age of 1 i was at carshows with my dads toy at the age of 2 i had badass pedal cars and u can ask n2truks that my dad did build one of the sickest squarebodys at the time and i built my first truck at 6 and my first full custom truck at 15 so i love these trucks and im buildin my first hopefully magazine truck

**N2TRUX** · 08-31-2005, 11:53 PM

You guys are determined to get this thread locked. Please keep your comments civil so it doesn't happen.....

*iceman7329* · 08-31-2005, 11:56 PM

Sorry about that N2TRUX. Just got a little mad there.

79Silv4x4 · 09-01-2005, 01:33 AM

Quote:

Originally Posted by iceman7329

1FaastC10, this is for real, this system is now in one truck at the shop but it will only go down about 9 inches. We have to get that problem fixed. But like I said it should be done around Febuary.

WTF? It's already installed in a truck but it does not work. You have done no field testing yet you already have an estimated completion date and price.

If it's already in a truck give us a shot from the outside with the window rolled up--this won't leak any internal details/patents pending, etc. If not, the deal is obviosuly

Not trying to be harsh but if you provide a little verifiable tease it will greatly increase your credibility and initial sales

79gmcc15 · 09-01-2005, 03:06 AM

I think ya'll need to lighten up and be patient. expect the best prepair for the worse! its not like hes the fringin project manager and can get pics and what not at will. it isent his job to satisfy everyones need and whim here. he is only here to let ya'll know how things are going and try to give progress reports when he can. give him a break!

**N2TRUX** · 09-01-2005, 08:58 AM

If you guys would read the thread you might see that iceman7329 states the kit is being designed at a place where

Quote:

My mother work there about two years ago. So theres my "connections".

which tells you he has some inside information that he is trying to share, but is not the one designing the kit.

I asked you to please keep it civil, but you chose not to. Since I don't see this heading anywhere but downhill, it's time to put it to bed....

08-31-2005, 08:00 PM	#52
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Geezus Krist guys . . ..... let's cut the dude some slack. I've also heard the same info & then not seen a finished product. I believe I'll just wait & see what happens w/o insulting him. If it doesn't happen, no big deal. Case in point: You would think a company that builds suspension parts, specifically a-arms, could make a set for these trucks in little to no time to sell to the general public. When I learned AirRide was going to make tubular arms for these trucks, it was almost 2yrs before the first production run was actually built. They didn't supply pics either, but eventually I got some. Patience grasshoppers. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-31-2005, 09:53 PM	#61
86 GMG Registered User Join Date: Apr 2005 Location: Tulsa Oklahoma Posts: 943	Chill Out Me Included WELL LIKE THE TITLE SAYES DO THAT AND __________________ square body trucks an addiction or an investment either way they consume all my extra time and money

08-31-2005, 10:02 PM	#62
86 GMG Registered User Join Date: Apr 2005 Location: Tulsa Oklahoma Posts: 943	Iceman The One Thing That Comes To My Mind Is You Are Sixteen And Apparently Very Modivated Towrds Vehicles That Really Inpresses Me Im 26 And Really Didnt Get Addicted Until About 18 Or 19 I Thing You Are Serious About This So Keep Up The Good Work And Hopefully In February Give Or Take You Can Prove Me And Everyone Else We Were Wrong About You And Remimber Stand Up For Your When You Believe With Out A Dowt That Your Right __________________ square body trucks an addiction or an investment either way they consume all my extra time and money

08-31-2005, 11:05 PM	#64
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	Age means nothing... If I wouldve offered to do some custom work on a guys car when I was 15 years old, they would've laughed in my face......UNTIL they saw the work. If you're getting somewhere, keep at it man. __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean.

08-31-2005, 11:53 PM	#66
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	You guys are determined to get this thread locked. Please keep your comments civil so it doesn't happen..... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-31-2005, 07:51 PM	#51
loblazer Senior Member Join Date: Mar 2004 Location: Fergus, Ontario Posts: 481	Will they offer tinted? Or dark tint? Thanks for all your work and perseverance. Doug

08-31-2005, 08:57 PM	#56
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	YET. lets see some teaser shots if they're so far along. im curious how a 16 year old has connections like this, yet there are many more who have been into building trucks for 10 years or more, and they havent come up with a solution yet.

08-31-2005, 09:07 PM	#58
iceman7329 Account Suspended Join Date: Mar 2005 Posts: 453	And by the way 1FaastC10 what the f*ck happened to the clear tail lights? Yea, thats a good one aint it? I dont think you can get them, who would of figured that, you havent given an update on those either, but your still working on them arent you? Yea I dont think so.

08-31-2005, 10:31 PM	#63
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	in dont know what age has to do with anything here....iceman is onto something really good here.....what does it matter if hes 16 or 60...hes working on it and most of us here are anxious to see what he comes up with...dont knock a man for tryin..

08-31-2005, 11:56 PM	#67
iceman7329 Account Suspended Join Date: Mar 2005 Posts: 453	Sorry about that N2TRUX. Just got a little mad there.

09-01-2005, 03:06 AM	#69
79gmcc15 Gettin It One Pice At A Time Join Date: Oct 2004 Location: everett, washington Posts: 2,688	I think ya'll need to lighten up and be patient. expect the best prepair for the worse! its not like hes the fringin project manager and can get pics and what not at will. it isent his job to satisfy everyones need and whim here. he is only here to let ya'll know how things are going and try to give progress reports when he can. give him a break! __________________ RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.