value and Rarity Questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jostrans68 · 09-01-2005, 12:47 AM

Rarity 1st 72 c20 frame was a 402 auto I have all the factory exhaust brackets there are 2 midway by cab 2 at the center support I will have to look but I think 2 at differential and 2 behind wheels. What are these worth?

it still has the factory big block mounts Clamshell style 1972 value?

I am keeping the rear end its is a 3.54 dana 60 8 lug

I will have a good set of the 3/4 ton trailing arms to sell and auto cross member

I will post some pic tommorow any idea on above values? i need opinions thanks Jack

Longhorn Man · 09-01-2005, 05:33 AM

The motor mounts are cheap, the towers they bolt to are worth more than the rest of your chassis there.

cdowns · 09-01-2005, 07:21 AM

trailing arms $50=$100 pair

frame you may have to pay somebody to take it

jostrans68 · 09-01-2005, 08:31 AM

Still has the towers that the mount goes to on frame any Idea on value of those?

**special-K** · 09-01-2005, 10:26 AM

The exhaust brackets are worth as much as the towers.I`d put them as a package for,like,$100?Maybe more?Someone wanting to go sb-bb original-style would want these bad.The trailing arms are common and cdowns is right.They`re the same as 1/2t.Now,about that rear....

Longhorn Man · 09-01-2005, 09:49 PM

3/4 ton trailing arms are beefier than 1/3 ton arms...good up grade.
I've seen the motor mount stands go for 100 bucks alone.

jostrans68 · 09-01-2005, 10:34 PM

I took of diff cover tonite and it looks pristine, drums are good still had factory tag on it showing 3.54 gears might help on gas a bit? looking for info if any on rear disc conv for 8 lug thanks Jack

09-01-2005, 12:47 AM	#1
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	value and Rarity Questions Rarity 1st 72 c20 frame was a 402 auto I have all the factory exhaust brackets there are 2 midway by cab 2 at the center support I will have to look but I think 2 at differential and 2 behind wheels. What are these worth? it still has the factory big block mounts Clamshell style 1972 value? I am keeping the rear end its is a 3.54 dana 60 8 lug I will have a good set of the 3/4 ton trailing arms to sell and auto cross member I will post some pic tommorow any idea on above values? i need opinions thanks Jack __________________ [CGTW Member former 67-72 now with a 96 silverado

09-01-2005, 07:21 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	trailing arms $50=$100 pair frame you may have to pay somebody to take it __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

09-01-2005, 08:31 AM	#4
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	Still has the towers that the mount goes to on frame any Idea on value of those? __________________ [CGTW Member former 67-72 now with a 96 silverado Last edited by jostrans68; 09-01-2005 at 08:32 AM.

09-01-2005, 10:26 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	The exhaust brackets are worth as much as the towers.I`d put them as a package for,like,$100?Maybe more?Someone wanting to go sb-bb original-style would want these bad.The trailing arms are common and cdowns is right.They`re the same as 1/2t.Now,about that rear.... __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-01-2005, 10:34 PM	#7
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	I took of diff cover tonite and it looks pristine, drums are good still had factory tag on it showing 3.54 gears might help on gas a bit? looking for info if any on rear disc conv for 8 lug thanks Jack __________________ [CGTW Member former 67-72 now with a 96 silverado

09-01-2005, 05:33 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	The motor mounts are cheap, the towers they bolt to are worth more than the rest of your chassis there.

09-01-2005, 09:49 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	3/4 ton trailing arms are beefier than 1/3 ton arms...good up grade. I've seen the motor mount stands go for 100 bucks alone.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.