How do I remove Wipers at base? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jakeslim · 09-01-2005, 07:25 PM

I need to remove my cowl to paint, but can't figure out how to remove wipers at the base? I don't want break them! Anybody know the trick?

AK|Bandit · 09-01-2005, 07:54 PM

There's a retainer clip at the base of each arm. Kind of like the inside door handle. I cant remember what type of clip it is though. I do remember it was a pain in the butt to remove them. I think I used a set of small needle nose pliers. I'll double check when I get off of work...

MOTHERTRUCKERS · 09-01-2005, 08:23 PM

Put a rag on the cowl and use a claw hammer just under the edge on the back side to pry up, hang on to the arm as it will fly off and scratch your paint.

matthufham · 09-01-2005, 09:41 PM

here i had this from a previous post

don't mind the blue marks. first push the clip in the direction of the arrow, and pry off arm in direction of it's arrow. more than likely it won't just come off, use pb blaster or oil and pull or pry hard. watch the paint on the cowl and you could bent the metal there if you pry too hard.

jakeslim · 09-01-2005, 11:41 PM

thanks responders

I'll try it in morning. Trying to get truck painted by end of Saturday.
Been working on body all week

72str8flush · 09-02-2005, 12:50 AM

Although I am sure people have done it by pushing the clip up, my advise is to get this . I tried the same advise given here but none of it worked. I bought this tool and it came off in 2 seconds. The tool actually goes over the top so there is no danger of messing up the cowl (something I already had done before buying the tool

). Unfortunately, no local parts store carried so you might just want to order it online and wait if you can.

junkyardjohn · 09-02-2005, 09:52 AM

WHY ON EARTH WOULD ANYBODY USE THE PROPER TOOL FOR REMOVING THESE IN A COUPLE OF SECONDS, WHEN THEY COULD USE CHANNELOCKS OR VISEGRIPS, CLAW HAMMERS, PRYBARS, SCREW DRIVERS OR MY ALL TIME FAVORITE........ AN ENGINE HOIST & A SHORT PIECE OF LOG CHAIN. I USSUALLY GET THESE OFF IN ABOUT 20 OR 30 MINUTES, WITH MINUMUM DAMAGE TO THE HOOD, COWL, FENDERS & THE CAB. JOHN

72str8flush · 09-02-2005, 10:07 AM

Quote:

Originally Posted by junkyardjohn

WHY ON EARTH WOULD ANYBODY USE THE PROPER TOOL FOR REMOVING THESE IN A COUPLE OF SECONDS, WHEN THEY COULD USE CHANNELOCKS OR VISEGRIPS, CLAW HAMMERS, PRYBARS, SCREW DRIVERS OR MY ALL TIME FAVORITE........ AN ENGINE HOIST & A SHORT PIECE OF LOG CHAIN. I USSUALLY GET THESE OFF IN ABOUT 20 OR 30 MINUTES, WITH MINUMUM DAMAGE TO THE HOOD, COWL, FENDERS & THE CAB. JOHN

After trying both methods the getting it off in under a minute and having a beer is a lot better than grabbing needlenose pliers and cussing and grunting for a half hour. Choice seems obvious to me.

matthufham · 09-02-2005, 11:28 AM

Quote:

Originally Posted by 72str8flush

After trying both methods the getting it off in under a minute and having a beer is a lot better than grabbing needlenose pliers and cussing and grunting for a half hour. Choice seems obvious to me.

i can do it in less than 5 (BOTH SIDES) with a tiny screw driver on the clip and a big screw driver or pry bar to pull the wiper arm off. and that was the 1st time i ever experimented with wipers, quite simple.

thecatseye66 · 09-02-2005, 12:17 PM

Sometimes those arms seem damn near welded on. I bought the remover tool from JC Whitney about 10 years ago and for 5 bucks I'd do it again if I lost the one I have. For that kind of money, there's just no reason to risk scratching up your cowl or shoving a screwdriver through your palm...

jakeslim · 09-02-2005, 01:04 PM

Quote:

Originally Posted by thecatseye66

....there's just no reason to risk scratching up your cowl or shoving a screwdriver through your palm...

can't wait to try removing this in a bit....unfortunetly i may will have to go the screwdriver through palm route

09-01-2005, 07:25 PM	#1
jakeslim Premium Level Member Join Date: Aug 2004 Location: Northern CA Posts: 829	How do I remove Wipers at base? I need to remove my cowl to paint, but can't figure out how to remove wipers at the base? I don't want break them! Anybody know the trick? __________________ 69 K5 CST stock- 350, 4speed 77 K5 - 383, auto, 6" lift, D60 front, 14b rear, 39" tsl's,

09-01-2005, 07:54 PM	#2
AK\|Bandit Registered User Join Date: Oct 2004 Location: Eagle River, Alaska Posts: 44	There's a retainer clip at the base of each arm. Kind of like the inside door handle. I cant remember what type of clip it is though. I do remember it was a pain in the butt to remove them. I think I used a set of small needle nose pliers. I'll double check when I get off of work... __________________ It's better to wear out than rust out!

09-01-2005, 08:23 PM	#3
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Put a rag on the cowl and use a claw hammer just under the edge on the back side to pry up, hang on to the arm as it will fly off and scratch your paint. __________________ Rest in Peace Ed. Thanks for all the good times.

09-01-2005, 11:41 PM	#5
jakeslim Premium Level Member Join Date: Aug 2004 Location: Northern CA Posts: 829	thanks responders I'll try it in morning. Trying to get truck painted by end of Saturday. Been working on body all week __________________ 69 K5 CST stock- 350, 4speed 77 K5 - 383, auto, 6" lift, D60 front, 14b rear, 39" tsl's,

09-02-2005, 12:50 AM	#6
72str8flush Registered User Join Date: Aug 2005 Location: Tennyson, Indiana 47637 Posts: 137	Although I am sure people have done it by pushing the clip up, my advise is to get this . I tried the same advise given here but none of it worked. I bought this tool and it came off in 2 seconds. The tool actually goes over the top so there is no danger of messing up the cowl (something I already had done before buying the tool ). Unfortunately, no local parts store carried so you might just want to order it online and wait if you can. __________________ 72 Chevy Short Bed Fleet: 350/TH350 - Sold - Now trying to sell the parts that I have left over. _______________________ 2006 VW GTI

09-01-2005, 09:41 PM	#4
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	here i had this from a previous post don't mind the blue marks. first push the clip in the direction of the arrow, and pry off arm in direction of it's arrow. more than likely it won't just come off, use pb blaster or oil and pull or pry hard. watch the paint on the cowl and you could bent the metal there if you pry too hard.

09-02-2005, 09:52 AM	#7
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	WHY ON EARTH WOULD ANYBODY USE THE PROPER TOOL FOR REMOVING THESE IN A COUPLE OF SECONDS, WHEN THEY COULD USE CHANNELOCKS OR VISEGRIPS, CLAW HAMMERS, PRYBARS, SCREW DRIVERS OR MY ALL TIME FAVORITE........ AN ENGINE HOIST & A SHORT PIECE OF LOG CHAIN. I USSUALLY GET THESE OFF IN ABOUT 20 OR 30 MINUTES, WITH MINUMUM DAMAGE TO THE HOOD, COWL, FENDERS & THE CAB. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

09-02-2005, 12:17 PM	#10
thecatseye66 '68 C-20 396 CST CC Join Date: Mar 2005 Location: Spokane, WA Posts: 454	Sometimes those arms seem damn near welded on. I bought the remover tool from JC Whitney about 10 years ago and for 5 bucks I'd do it again if I lost the one I have. For that kind of money, there's just no reason to risk scratching up your cowl or shoving a screwdriver through your palm... __________________ 68 C-20 396/TH400 CST Custom Camper NOW W/DISC BRAKES 01 Jetta Turbo Daily Driver 84 Yamaha Virago 700 - Alaska to Florida Via Maine & Mexico



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.