Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-30-2005, 06:18 PM | #51 | |
WTB this ad
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,074
|
Quote:
Check out this link for some pictures of my little brother taken the weekend before his crash. http://www.photoreflect.com/scripts/...turtle&b=10016 By the way he rode the bike 150 miles home after it went down. He had no front brakes due to the loss of a lever but aside from that it was still rideable. |
|
08-30-2005, 09:06 PM | #52 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,126
|
I agree with see ten. I've owned two bikes in the past. I had my fun with them and sold them. Not because of the several close calls, or the couple times I layed it down and walked away. It was because I live up north and had limited space for storage over the winter. Then I just didn't ride it enough to justify keeping it around.
Now I could use that same exact logic on my truck. I hardly ever drive it, it takes up a space in the garage I really could use for my car (wife gets the other indoor spot). But I just love it too much. It was my first car, I've had it since 1983. It was my dads before that for about 8 years. It was my grandpas before that back in like 1973 or 74. It will be my sons way too soon. Anyway, I had my misc. cars and trucks in the ditch way too many times, my fair share of fender benders, and it seems that everytime I get into the Minneapolis area I've got someone cutting me off, pulling into my lane with me in it, people on cell phones, kids listening to boomboom so loud they couldn't hear a siren, etc, etc,. If you are afraid of the risk on a bike, you shouldn't have one. If you are comfortable with them and are careful, you will probably be OK. If your not OK, don't blame the bike, accidents happen no matter what you drive. I'm done ranting (rambling) now. I feel much better. Nice deep cleansing breathe. HG
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff |
08-31-2005, 12:33 AM | #53 |
Registered User
Join Date: Apr 2005
Location: Chula Vista, California
Posts: 495
|
I am 50 years old and have owned somewhere between 40 & 50 motorcycles over the
years. I can honestly say that motorcycles are not dangerous. It is the unskilled people riding them that are. Before going out and buying a 1200cc "roadburner", for God's sake learn to ride!! There are many instructional schools offered. USE THEM!! Start on a small bike first and then move up to a larger one as your skills progress. Dress for the crash, ride sober, and ride aware. You will find that motorcycles are a great way to commute and save on gas at the same time. Besides, with all the money you save, think of all the cool parts you can buy for your truck!!
__________________
rwgregory 67 GMC 2500 ,2w/d wide box 305 V-6, 4-speed |
09-01-2005, 04:48 AM | #54 | |
Registered User
Join Date: Nov 2004
Location: "Under Montana skies."
Posts: 1,836
|
[/Donor Cycle Hijack]
Quote:
1. If applicable, are points gapped right? Dwell meter check? Convert to Petronix II [~$120] and Flamethrower II coil [~$40]? Or M&H version to maintain stock wiring apperance? 2. Do your rotor and cap have brass terminals? Not too many miles? 3. If you're using oem ignition wires, have you checked them for breaks (high resistence)? Or just replace them if over ~20k miles. 4. Spark plugs gapped right for engine's ignition system? Good plug color? <20k miles on them? 5. Is the choke high idle rpm right, i.e., not too gas guzzling high? 6. This Winter, plug in engine on timer to save gas since choke will open sooner. I'd expect you'll still come out ahead on the electric bill vs. gas bill. 7. Does the engine have a hot air stove to warm the carb? Again, to make the mixture-enriching choke open sooner. 8. Do all vacuum lines seal well? No leaks? 9. Does booster vacuum line seal well? 10. Do PCV hoses seal well? Clamps used? PCV good? Cheap to replace once a year. I've read that even if the ball moves when it's shaked, it can still be "bad." 11. Fresh air filter? Use a good AC/Delco or NAPA/Wix filter or other good paper element filter and replace every 3-6 months. This makes a big difference, especially if you often travel Idaho's unpaved roads. For commuter trucks, bi-annual replaceable filter replacement is always a good idea. More frequent air filter replacement is affordable at today's gas prices. A vacuum gauge could help you discover when the filter is hindering airflow. Check right after replacing the filter when the engine is warm and then when it has 5-10k on it. Watch out for ambient temp change effects on readings. 12. Switch to synthetic PS fluid for less engine drag? [just throwing that one out there for kicks.]. 13. Install a vacuum gauge to monitor the effects of the weight of your right foot.
__________________
'71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup. |
|
09-02-2005, 04:06 PM | #55 |
Registered User
Join Date: Aug 2005
Location: POCONO MTS PA
Posts: 64
|
I'm Considering A Water Injection Unit. It Allows For Advanced Timing Without Detonation.
|
09-02-2005, 04:08 PM | #56 |
Registered User
Join Date: Aug 2005
Location: POCONO MTS PA
Posts: 64
|
Also An Electric Fuel Pump Helps Shave Off A Little Hp Draw. Electric Fan And Electric Water Pump Too.
|
Bookmarks |
|
|