What to do about a set of prefab doors? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Streetmaster · 09-05-2005, 02:33 AM

ThanX guys for the responces, it seem as if you've done this before. I thought about doing that, but was affraid of door damage. Its almost as if the CO. that sold me the doors, had them all leaned up against one another, and it cosed them to buckle. But in anyevent (iceman7329) thanks for the offer, ill definentlly keep it in mind if i cant get mine to fit any better, beside i live in SW PA, about an hour south of Pittsburgh,PA.

**N2TRUX** · 09-05-2005, 09:53 AM

The stock doors on my 82 Blazer had a gap in them. I worked with the body man and he showed me how it was done. Go slow and you will see great results...

a28doc · 09-05-2005, 11:42 PM

go slow and also might add putting an old blanket between the door and 2x4 it will help even out the pressure a little and keep you from marring the doors
Doc

Streetmaster · 09-06-2005, 12:22 AM

Once again guys thanX for all the input

I tried the 2x4 methed on one of the doors, a it seem to work ok, but it still needs somemore work to fit right.

bigarmzz · 09-06-2005, 07:52 AM

"beside i live in SW PA, about an hour south of Pittsburgh,PA. "

where abouts???

your probably not too far from me

Streetmaster · 09-06-2005, 08:18 PM

Im from a town called Uniontown, PA. Its about 22 miles from the WV, state line.

bigarmzz · 09-06-2005, 11:18 PM

Quote:

Originally Posted by Streetmaster

Im from a town called Uniontown, PA. Its about 22 miles from the WV, state line.

cool, i dated a girl from brownsville....ya know anyone from there?

her name was lori lent

i'm not too far from ya..i'm in elkins west virginia

09-05-2005, 11:42 PM	#3
a28doc '87 V20 4x4 Join Date: Jun 2004 Location: South Western Ohio Posts: 1,073	go slow and also might add putting an old blanket between the door and 2x4 it will help even out the pressure a little and keep you from marring the doors Doc __________________ '86 K5 Blazer 4x4 FOR SALE '87 v20 4X4 '99 S10 Blazer 4X4

09-06-2005, 07:52 AM	#5
bigarmzz Registered User Join Date: Sep 2004 Location: Elkins, West Virginia Posts: 2,545	"beside i live in SW PA, about an hour south of Pittsburgh,PA. " where abouts??? your probably not too far from me __________________ 1987 350 TBI lowered 5/7

09-05-2005, 02:33 AM	#1
Streetmaster Registered User Join Date: Mar 2005 Posts: 92	ThanX guys for the responces, it seem as if you've done this before. I thought about doing that, but was affraid of door damage. Its almost as if the CO. that sold me the doors, had them all leaned up against one another, and it cosed them to buckle. But in anyevent (iceman7329) thanks for the offer, ill definentlly keep it in mind if i cant get mine to fit any better, beside i live in SW PA, about an hour south of Pittsburgh,PA.

09-05-2005, 09:53 AM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	The stock doors on my 82 Blazer had a gap in them. I worked with the body man and he showed me how it was done. Go slow and you will see great results...

09-06-2005, 12:22 AM	#4
Streetmaster Registered User Join Date: Mar 2005 Posts: 92	Once again guys thanX for all the input I tried the 2x4 methed on one of the doors, a it seem to work ok, but it still needs somemore work to fit right.

09-06-2005, 08:18 PM	#6
Streetmaster Registered User Join Date: Mar 2005 Posts: 92	Im from a town called Uniontown, PA. Its about 22 miles from the WV, state line.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.