Stepside Bed Panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cwilkie · 08-29-2005, 05:26 PM

Does any know where I can find so stepside bed panels? Mine are full of bondo. Putty putty putty!!

Chance

LUV2XCLR8 · 08-29-2005, 05:52 PM

NOS, Reproduction, or Used

They are out there, but hard to find

lowrider79 · 08-29-2005, 08:48 PM

I have a complete box that has real nice sides, front panel and tail gate that I will sell. I'm in Minnesota

Custom_C5 · 08-29-2005, 11:47 PM

Long or short?.....

cwilkie · 08-30-2005, 02:46 PM

a short bed. I would like to get something that is straight with no bondo. What does it cost to ship them new?

Chance

72swbcamo · 08-30-2005, 03:13 PM

I have two brand new repro bed sides with ss angle strips, not attached.

They go for $399.00 each. I'll let them go for $400.00 for both with the angle strips, plus shipping.

Also have a front bed panel and a rear cross sill. Both for $100.00 or $50.00 each pluss shipping.

Dhitman · 08-30-2005, 08:27 PM

How Much Shipping On Repo Bedsides To 29073

cwilkie · 08-31-2005, 09:27 AM

please post pics as I am interested and have the ca$h!!!

72swbcamo · 08-31-2005, 09:17 PM

I need to take some pics and post them. I have never do this before so bear with me. As fo shipping, I would guess that each side weighs about 30 lbs. If any knows for sure please advise. These most likely have to be shipped by freight. My zip is 06705 if you know how to use that shipping estimator.

Dhitman · 09-01-2005, 11:25 AM

I'm still would like pics of bedsides .

lowrider79 · 09-01-2005, 12:57 PM

I will post pictures tonight. My camera was on vacation with my family and it didn't get back home until this morning.

lowrider79 · 09-01-2005, 07:39 PM

Here's some pictures

lowrider79 · 09-01-2005, 07:41 PM

One more

cwilkie · 09-02-2005, 10:29 AM

Please do not take this as an insult but are there any signs of bondo or putty on the bed side panels? Mine are full of play-do so please to not take this as an insult.

Chance

lowrider79 · 09-02-2005, 12:09 PM

I wouldn't take that as a insult, no I don't see any bondo on them. There was no bondo on the other parts I used from this truck. I stripped all the paint off of the parts I used.

Dhitman · 09-02-2005, 07:00 PM

Nice-what would shipping be 29073

lowrider79 · 09-02-2005, 07:10 PM

Quote:

Originally Posted by Dhitman

Nice-what would shipping be 29073

The truck broker I use is out until Tuesday. Would this be to a residence, business or a can you pick up at a truck terminal? I recently shipped a engine block to Florida and it cost $110. It was there in 2 days. I will try and get a quote before Tuesday but I will need to know where you would want it delivered to.

Thanks

Dhitman · 09-02-2005, 07:26 PM

Can Pick Up @ Terminal Or Business

lowrider79 · 09-02-2005, 07:34 PM

Quote:

Originally Posted by Dhitman

Can Pick Up @ Terminal Or Business

I called another broker and they are out until Tuesday as well. I will get a quote to a terminal in your area early Tuesday. If you decide you want them I will dismantel the box once I recieve your or whoevers payment. Thanks for your interest.

I am going to wait to dismantel the box until it's sold in case I sell it as a complete unit. We have a swap meet here soon and I will probably bring it there.

lowrider79 · 09-06-2005, 07:31 PM

Terminal Pick up at zip 29073 the shipping costs are $120

Terminal Pick up in Belcourt the shipping costs are $115

67ChevyRedneck · 09-06-2005, 07:54 PM

Lowrider, how are the fenders on that bed and would you like to part with them?

lowrider79 · 09-06-2005, 07:56 PM

I'll sell them but someone made custom slits in the rear of them for custom taillights. Look at the parts board I'll ttt the pictures.

lowrider79 · 09-06-2005, 10:02 PM

No problem I have two other people interested. One is coming by this Saturday. Good luck with your project.

Dhitman · 09-06-2005, 11:45 PM

Thanks lowrider for all your hard work--Found complete bed from local trader.Sorry

08-29-2005, 05:26 PM	#1
cwilkie Chance Join Date: Sep 2001 Location: Belcourt ,ND, USA Posts: 750	Stepside Bed Panels Does any know where I can find so stepside bed panels? Mine are full of bondo. Putty putty putty!! Chance __________________ 1968 Chevrolet Stepside BB 396 w/TH400 1972 Chevrolet 3/4 Ton 4x4 BB 496 w/TH400

08-29-2005, 05:52 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	NOS, Reproduction, or Used They are out there, but hard to find __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 08-29-2005 at 05:52 PM.

08-30-2005, 02:46 PM	#5
cwilkie Chance Join Date: Sep 2001 Location: Belcourt ,ND, USA Posts: 750	bed a short bed. I would like to get something that is straight with no bondo. What does it cost to ship them new? Chance __________________ 1968 Chevrolet Stepside BB 396 w/TH400 1972 Chevrolet 3/4 Ton 4x4 BB 496 w/TH400

08-30-2005, 03:13 PM	#6
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	short bed sides I have two brand new repro bed sides with ss angle strips, not attached. They go for $399.00 each. I'll let them go for $400.00 for both with the angle strips, plus shipping. Also have a front bed panel and a rear cross sill. Both for $100.00 or $50.00 each pluss shipping.

08-30-2005, 08:27 PM	#7
Dhitman Registered User Join Date: Apr 2005 Location: Lexington SC 29073 Posts: 16	Bed Sides How Much Shipping On Repo Bedsides To 29073

08-29-2005, 08:48 PM	#3
lowrider79 Registered User Join Date: Jul 2004 Location: Shakopee Minnesota Posts: 174	I have a complete box that has real nice sides, front panel and tail gate that I will sell. I'm in Minnesota

08-29-2005, 11:47 PM	#4
Custom_C5 Registered User Join Date: Jun 2004 Location: ASS-hhh-ville Posts: 94	Long or short?.....

08-31-2005, 09:27 AM	#8
cwilkie Chance Join Date: Sep 2001 Location: Belcourt ,ND, USA Posts: 750	pics please post pics as I am interested and have the ca$h!!! __________________ 1968 Chevrolet Stepside BB 396 w/TH400 1972 Chevrolet 3/4 Ton 4x4 BB 496 w/TH400

08-31-2005, 09:17 PM	#9
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Bed Sides I need to take some pics and post them. I have never do this before so bear with me. As fo shipping, I would guess that each side weighs about 30 lbs. If any knows for sure please advise. These most likely have to be shipped by freight. My zip is 06705 if you know how to use that shipping estimator.

09-01-2005, 11:25 AM	#10
Dhitman Registered User Join Date: Apr 2005 Location: Lexington SC 29073 Posts: 16	bedsides I'm still would like pics of bedsides .

09-01-2005, 12:57 PM	#11
lowrider79 Registered User Join Date: Jul 2004 Location: Shakopee Minnesota Posts: 174	I will post pictures tonight. My camera was on vacation with my family and it didn't get back home until this morning.

09-01-2005, 07:39 PM	#12
lowrider79 Registered User Join Date: Jul 2004 Location: Shakopee Minnesota Posts: 174	Here's some pictures Attached Images

09-01-2005, 07:41 PM	#13
lowrider79 Registered User Join Date: Jul 2004 Location: Shakopee Minnesota Posts: 174	One more Attached Images

09-02-2005, 10:29 AM	#14
cwilkie Chance Join Date: Sep 2001 Location: Belcourt ,ND, USA Posts: 750	putty Please do not take this as an insult but are there any signs of bondo or putty on the bed side panels? Mine are full of play-do so please to not take this as an insult. Chance __________________ 1968 Chevrolet Stepside BB 396 w/TH400 1972 Chevrolet 3/4 Ton 4x4 BB 496 w/TH400

09-02-2005, 12:09 PM	#15
lowrider79 Registered User Join Date: Jul 2004 Location: Shakopee Minnesota Posts: 174	I wouldn't take that as a insult, no I don't see any bondo on them. There was no bondo on the other parts I used from this truck. I stripped all the paint off of the parts I used.



Register or Log In To remove these advertisements.

09-02-2005, 07:00 PM	#16
Dhitman Registered User Join Date: Apr 2005 Location: Lexington SC 29073 Posts: 16	bedsides Nice-what would shipping be 29073

09-02-2005, 07:26 PM	#18
Dhitman Registered User Join Date: Apr 2005 Location: Lexington SC 29073 Posts: 16	Bedsides Can Pick Up @ Terminal Or Business

09-06-2005, 07:31 PM	#20
lowrider79 Registered User Join Date: Jul 2004 Location: Shakopee Minnesota Posts: 174	Terminal Pick up at zip 29073 the shipping costs are $120 Terminal Pick up in Belcourt the shipping costs are $115

09-06-2005, 07:54 PM	#21
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Lowrider, how are the fenders on that bed and would you like to part with them? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

09-06-2005, 07:56 PM	#22
lowrider79 Registered User Join Date: Jul 2004 Location: Shakopee Minnesota Posts: 174	I'll sell them but someone made custom slits in the rear of them for custom taillights. Look at the parts board I'll ttt the pictures.

09-06-2005, 10:02 PM	#23
lowrider79 Registered User Join Date: Jul 2004 Location: Shakopee Minnesota Posts: 174	No problem I have two other people interested. One is coming by this Saturday. Good luck with your project.

09-06-2005, 11:45 PM	#24
Dhitman Registered User Join Date: Apr 2005 Location: Lexington SC 29073 Posts: 16	Thanks lowrider for all your hard work--Found complete bed from local trader.Sorry

Register or Log In To remove these advertisements.