Stepside bedsides available, discounted price - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MAR-Ktech · 09-03-2005, 10:15 AM

We have five pair of short stepside bedsides that were ordered special and the customer cancelled the order. We would like to sell these at a substantial discount. They are our normal top quality parts, but of special design making them not part of our standard product line. These were ordered as standard bedsides without fender holes. We were just starting to make them when the order was cancelled. The skins are made but the angles have not been welded on yet.

Here is what we can do, maybe help some of you and help us move them off the shop floor. We can weld on the steel angle of your choice, and the bedside is complete except for no fender holes. Normal cost is $370 each, we will sell these ten bedsides for $270 each. These bedsides fit GM short bed stepside trucks from '55 2nd through '72 depending on which angle strip you choose. You just have to drill your own fender mounting holes. All other holes, bends, welds, etc are there as our standard bedsides. Upgrades to stainless angles are also available at the usual additional costs. They do not yet have the three ribs embossed so we could delete those if you wanted.

These can be picked up at our shop or shipped by motor freight, our normal shipping charges would apply. Since this is a special offer to this board, order by phone and mention this special offer by Mar-Ktech. Be sure to tell the order taker exactly what year is your truck and allow two weeks for us to complete them.

Mar-Ktech

rico_bob · 09-06-2005, 11:47 PM

Mar-K do these bed sides have the stake pocket holes in the top edge and do they have the stake pockets front and rear welded on? The Cameo bed sides did not have holes ... but you know that right? rico_bob

www.ricos-rods-and-relics.com

MAR-Ktech · 09-07-2005, 09:56 AM

These bed sides have the stake holes on the top. As they sit, they do not have the stake pockets welded on, but they are scheduled for that soon. The process calls for the angle welded on first then the stake pockets. We are waiting to see if anybody wants special angles before welding the stake pockets.

Cameo bed sides have stake holes, plus a lot of other work done on them that is different than regular bed sides. Let me know if you want to use these for a Cameo.

Mar-Ktech

09-03-2005, 10:15 AM	#1
MAR-Ktech Truck Parts Mfg. Join Date: Jul 2005 Location: Oklahoma City, OK Posts: 697	Stepside bedsides available, discounted price We have five pair of short stepside bedsides that were ordered special and the customer cancelled the order. We would like to sell these at a substantial discount. They are our normal top quality parts, but of special design making them not part of our standard product line. These were ordered as standard bedsides without fender holes. We were just starting to make them when the order was cancelled. The skins are made but the angles have not been welded on yet. Here is what we can do, maybe help some of you and help us move them off the shop floor. We can weld on the steel angle of your choice, and the bedside is complete except for no fender holes. Normal cost is $370 each, we will sell these ten bedsides for $270 each. These bedsides fit GM short bed stepside trucks from '55 2nd through '72 depending on which angle strip you choose. You just have to drill your own fender mounting holes. All other holes, bends, welds, etc are there as our standard bedsides. Upgrades to stainless angles are also available at the usual additional costs. They do not yet have the three ribs embossed so we could delete those if you wanted. These can be picked up at our shop or shipped by motor freight, our normal shipping charges would apply. Since this is a special offer to this board, order by phone and mention this special offer by Mar-Ktech. Be sure to tell the order taker exactly what year is your truck and allow two weeks for us to complete them. Mar-Ktech __________________ GET MAR-K Quality! Restoration and Custom Pickup Parts for Chevy, GMC, Ford, Dodge and Custom Trucks

09-06-2005, 11:47 PM	#2
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	Mar-K do these bed sides have the stake pocket holes in the top edge and do they have the stake pockets front and rear welded on? The Cameo bed sides did not have holes ... but you know that right? rico_bob www.ricos-rods-and-relics.com __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

09-07-2005, 09:56 AM	#3
MAR-Ktech Truck Parts Mfg. Join Date: Jul 2005 Location: Oklahoma City, OK Posts: 697	These bed sides have the stake holes on the top. As they sit, they do not have the stake pockets welded on, but they are scheduled for that soon. The process calls for the angle welded on first then the stake pockets. We are waiting to see if anybody wants special angles before welding the stake pockets. Cameo bed sides have stake holes, plus a lot of other work done on them that is different than regular bed sides. Let me know if you want to use these for a Cameo. Mar-Ktech __________________ GET MAR-K Quality! Restoration and Custom Pickup Parts for Chevy, GMC, Ford, Dodge and Custom Trucks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.