Looking for a pair of good backing plates - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Maxwell007 · 09-08-2005, 01:24 PM

Need a pair of backing plates for my 72 3/4T with a Dana 60 rear. Doing a brake job and the old ones are badly grooved. I can weld them up and grind the pads flat but would prefer new plates or at least ones better than what I have.
Thanks in advance for any responses.

**raggedjim** · 09-08-2005, 05:01 PM

Maxwell, when I was looking for these I ended up welding and grinding, good ones are hard to come by.

Good luck, Rg

09-08-2005, 01:24 PM	#1
Maxwell007 Registered User Join Date: Apr 2005 Location: Southern California Posts: 14	Looking for a pair of good backing plates Need a pair of backing plates for my 72 3/4T with a Dana 60 rear. Doing a brake job and the old ones are badly grooved. I can weld them up and grind the pads flat but would prefer new plates or at least ones better than what I have. Thanks in advance for any responses.

09-08-2005, 05:01 PM	#2
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,477	Maxwell, when I was looking for these I ended up welding and grinding, good ones are hard to come by. Good luck, Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.