Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-21-2002, 10:39 PM | #1 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
met a punk in a truck...LOL!!!!
in traffic today I was sittin at a light, and this 16 year old punk pulls up in the nastiest jalopy of a turd you could ever imagine. I don't know what was holding it together. It was a lwb step side with more rust holes than sheet metal. Cab corners were not only rusted out, but all the way up to the line where the molding used to be on it. The door was so bad, I was lookin at his window in the bottom of the friken door!
Anyways, this thing had one header that the collecter was almost rusted off, and it was running on 7 holes...sounded like crap. The kid pulls up and shouts to me askin if i wanted to RACE!!! I shut off my truck and yelled WHAT? (makin sure I heard him right) He says this thing ROCKS...it has a stock car engine in it. ( stock car...said it like it was one word) I cracked up laughin, so he revved it up, smoke pouring out the one pipe that was still attached. I said Knock that sh!t off! the light chainges, and he slams the gas and then pops it in drive once the engine was up to about 5000 RPM. The right rear tire spun for about 2 feet and it putted through the intersection. By this time I was laughing so damn hard I was about to p!ss myself. I passed him up and pulled into a gas station. He pulls in revvin the pee oput of his 'race motor' trying sooooo hard to look cool. There was a guy in an old camaro there that looked and cracked up laughing too. I told the kid about the board and his responce was I don't need 5000+ people to tell me how to do it, I have it all planned out. OK...what ever. I ask if i can see his stock-car engine, and he tells me he hasn't figured how to open the hood. (he says this as opens the drivers door pointing to the vent knob) He says i can't get the hood release thngy to work, it just moves freely with a screatching noise. I opened the hood, and was greated to the nastyest, grungiest, slimiest small block ever seen by man. This thing was cobbled so bad it was unreal. (a bread bag twisty tie held the throttle rod to the ONE BARREL carb. A MONO JET ON A STOCK-CAR!!!!!! I was laughing so bad it was unreal. I reached down and plugged in the spark plug wire that was zapping the frame every time it got power, and told him to start it up. It still sounded like crap, but at least it idled on it's own. He killed it and I tried telling him that it is a stock (as in original) car (as in caprice station wagon) engine. He starts telling me how it is a de-tuned winston cup car!!! I smiled as i got in my truck and left. I never did tell him how I opened the hood, and as I pulled out of the lot, I heard him slam the hood, then stare through the grill tryign to figure it out. I thought it would be funny to atch this, so I pulled back in and bought a bottle of dew (like I ddn't already have one) just so I could see if he would getit. He was still trying to figure it out 5 min later when i left. This kid made my day. 16, on top of the world, ad trying to say he has it all figured it out. Other peoples children...I'm tellin you... |
08-21-2002, 10:55 PM | #2 |
Registered User
Join Date: Jan 2002
Location: Calgary, Alberta, Canada
Posts: 451
|
Good story Longhorn, LOL.
Its one thing to be young and cocky, and another to be young and stupid. Takes all kinds to make the world go around, I guess.
__________________
72 C10 Cheyenne Super Full trim Factory tach dash A/C dash Factory tilt 350 / 350 power train - with Edelbrock components. |
08-21-2002, 11:10 PM | #3 |
Senior Member
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,764
|
The young and the restless,go figure!
__________________
Things happen for a reason! |
08-21-2002, 11:13 PM | #4 |
Registered User
Join Date: Jun 2000
Location: Bismarck, ND
Posts: 4,296
|
LOL great story Andy. I'd loved to have seen that!
__________________
Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club. |
08-21-2002, 11:15 PM | #5 |
Join Date: Dec 1999
Location: Eastern - Manitoba Canada, Winnipeg
Posts: 4,369
|
Maybe you were on one of those bloopers or oblivios shows....lol.
__________________
Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife. |
08-21-2002, 11:21 PM | #6 |
Registered User
Join Date: Jun 2002
Location: SPRINGFIELD MO.
Posts: 126
|
lollollololooool
sounds like this town except it would be 79 honda civic w/ a fart pipe, slammed to the ground (by heating of course) and it would be "this car has a indi car motor" instead of stock car. great story andy
__________________
the sun even shines on a dogs a$$ some days!!! |
08-21-2002, 11:31 PM | #7 |
Account Suspended
Join Date: Jan 2000
Location: Woodstock, IL
Posts: 7,020
|
LOL, that's great!!
|
08-22-2002, 02:03 AM | #8 |
Registered User
Join Date: Apr 2002
Location: Longmont, CO
Posts: 436
|
LMFAO!!!!!!!!!!!!!!!!
That was great..... I think.... sounded too much like someone describing my truck....I should go check to make sure someone didn't steal it... And here all I ever run into is punks in rustangs... and my truck is nowhere near close enough to run faster than a turtle going up a hill....
__________________
------------------------------------------------ I say it's only money, my wife says it's only a truck.... '71 C10 Deluxe, factory ac, ps, pb, should be done by 2102 Longmont, CO husker95@hotmail.com |
08-22-2002, 02:10 AM | #9 |
Recovering Truck Driver
Join Date: Mar 2002
Location: Orleans, NE USA
Posts: 1,883
|
that's pretty good.....i don't think i can remember meeting anyone who couln't figure out how to get the hood open.....lmao
__________________
67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska |
08-22-2002, 02:30 AM | #10 |
Registered User
Join Date: Feb 2001
Location: Ohio
Posts: 1,025
|
Cool Story, but what year was the truck ?
|
08-22-2002, 02:34 AM | #11 |
My other Love
Join Date: Aug 2001
Location: Castlegar B.C. Canada
Posts: 4,085
|
I am only 16 I may know quite a bit but i do noy know everything thats why i joined this board. Got more than just mechanical Knowledge. I have been getting a lot of life knowledge here to. Its a great place to be. Id like to meet this kid one dayhe sounds like he has the maturity level of a 9 year old!
__________________
Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life |
08-22-2002, 08:16 AM | #12 |
Senior Member
Join Date: Jun 2001
Location: Shelbyville, KY
Posts: 3,261
|
Andy, hanging out with Josh again?
|
08-22-2002, 08:33 AM | #13 |
Old Skool Club
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
I will soon be 55 years old. There are very few of us (enthusiasts) who have not seen this behavior, and some of us probably were that kid, at one time. Remember your first car/truck?
My first car was a '48 Dodge 4-dr. Got it in '63. There was so much wear in the cylinder bores that at least 2 of the pistons were swapping holes as they reached the bottom of there stroke. It smoked so bad you couldn't see the front bumper on my Dad's car as he pushed us up a hill while it was running and doing all it could! I had all kinds of grand plans for it, like another motor or getting that one rebuilt. At that time, it would cost $35 for a used engine and I didn't have the money for that. The old Dodge looked good, sitting in the shed, not running. My neighbor and I used to push it up the hill in the pasture and sit in it and coast down to the bottom, where we got out and pushed it back up again. Talk about needing a size 4 hat and having a size 18 neck....get the picture. Way too much testosterone used pushing that Dodge. At least I learned that I didn't want any more Dodges. Is he kin to Richard Petty? Did he mention that? Or, maybe Junior Johnson, since Junior was a Chevy man. Maybe that's where the truck came from.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
08-22-2002, 09:15 AM | #14 |
Post Whore
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,686
|
Thanks for giving me a smile this morning. That was a great one!
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
08-22-2002, 10:46 AM | #15 |
Before and After
Join Date: Feb 2000
Location: Leduc, Alberta CANADA
Posts: 632
|
Kids who are so mechanicly handicapped, shouldn't own vehicles. You should have sold him your Mountain Dew as Headlight fluid, Could have mada a buck or two, and he would have "Halogen fluid" to shine farther up the road, 'cause his truck goes so fast.
__________________
Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA |
08-22-2002, 11:09 AM | #16 |
Registered User
Join Date: Mar 2002
Location: Springfield, VA
Posts: 460
|
Way too funny. I'm LMAO. I suppose he'll try that line on some young gal, but it won't get him too far. He'll probably kep racing it until it blows !!!!!!!!!! (and he has to take a walk down the road picking up chunks of connecting rods) TJ
__________________
1971 Shortbed 350/350 w/ Posi-traction 3:73's 1996 Chevy Silverado TJ in Springfield, Virginia Likes old Chevy trucks Drinks Miller MGD |
08-22-2002, 12:22 PM | #17 |
Now the others dig........
Join Date: May 2002
Location: San Antonio, TX
Posts: 1,520
|
poor kid.....
poor kid.....someone lied to him.....
man.....that was a funny story though.....I hope I can have some experience like that....I would never race in the streets....too dangerous....too many cops....but man if someone really wanted it....i'd get him all riled up and rev up my engine and be ready for the green....oh man i'd talk so much trash and just push his buttons...then.....GREEN....just drive as a well mannered considerate member of the driving community.....hope fully he would peel out and look like an idiot..and maybe even get a ticket....and I would laugh and point.
__________________
68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue LOOKING FOR A 67 4 DOOR IMPALA!!!Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^**#$ and you can fit a body in the trunk of a 67 Impala MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar TRUCKY LINKS http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788 |
08-22-2002, 01:16 PM | #18 |
Registered User
Join Date: May 2002
Location: North Carolina
Posts: 1,234
|
I think you all are missing the big problem here--he's at breeding age and I'll bet he has a sister--bingo! a new welfare recipient!
__________________
Stepsides look like real trucks! Smitty |
08-22-2002, 06:24 PM | #19 |
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
people like that piss me off, they are so arrogant to think for a second. thats deffinatly better than the other day, cruising in the 85 t-top Z/28 I've been dragracing, and guy(mid 20s) in a beat up rusty 3rd gen. camaro pulls up looks over and revs his motor, blows smoke out I laugh and 1/3 throttle off the light with the 355 and 700R4 and he is bangin gears(prolly a t-5) and when I, gently on the throttle, shift it to 2nd she barks the tires off more than this beat up camaro floored bangin a 5 spd. and I still beat him to, 1/3 throttle. dumb sh*t anyway, see not ALL teens are dumbasses I'm 17 and this guy was prolly 25 or 26 by the looks of him.. oh well
Bryce
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa |
08-22-2002, 10:07 PM | #20 |
Senior Member
Join Date: Jun 2002
Location: Cecilia, Louisiana
Posts: 1,638
|
hehe Great story!!
__________________
Chris click here to see my buildpage http://67-72chevytrucks.com/vboard/s...d.php?t=394656 ---------------------------------- 1979 C10 Silverado Big10 SWB Factory 454/400 Cardinal Red/Santa Fe Tan (original paint) 1969 Camaro X44 LS swap 1968 C10 SWB Fleetside (SOLD) 468BBC MultiPort TPI / Dynamic EFI P4 Black/Black 1963 Nova SS convertible (SOLD) 194 I6/ PowerGlide |
08-22-2002, 10:18 PM | #21 |
Registered User
Join Date: Feb 2000
Location: Maquoketa, Ia/ Orr, Mn
Posts: 3,051
|
I'm 17 and am the motor head at school, other kids bring me along when they go car shopping and ask which is better. Sure I like to rev it a little but I know when to stop and back off. This kid sounds like he just got the truck from his redneck uncle who at one time saw a cup race and said his truck sounded like one of those cars and sold it to his nephew. well whatever, just rambling. Feel bad for that truck though.
|
08-22-2002, 10:31 PM | #22 |
registered IWATA user
Join Date: Feb 2002
Location: Baton Rouge
Posts: 4,481
|
MJN, thats me to, but i only know chevys, theres mostly hondas at my school, knowing how to change oil is rare at my school too, i would normally hate people like this, but that was too funny to hate him. as someone said, he just got lied too, a guy with a frame up'd 68 told me that his 502 was stock when was 15, i believed him and always asked if a 67-72 hd a 502 in it when i was shopping for trucks, he jsut needs to have a long talk with someone on teh board to straighten him out, funny story though
__________________
-'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack. |
08-23-2002, 01:11 AM | #23 |
Back from the Dead
Join Date: Dec 2001
Location: Salem, Oregon
Posts: 522
|
Makes ya wonder how kids like this get their liscense? All i run into around here is the Rice Burners and I just point and laugh at them and their fart cannons and cardboard body kits hehe
Kenny
__________________
The only Carb that matters to me is the one under my hood! Salem, Oregon |
08-23-2002, 04:46 AM | #24 |
My other Love
Join Date: Aug 2001
Location: Castlegar B.C. Canada
Posts: 4,085
|
Fart Cannon! ah man thats too! funny.
I always wonderd what those fart cannons would sound like on a v8
__________________
Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life |
Bookmarks |
|
|