67 68 E-brake handle. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 09-12-2005, 02:03 PM

Came off of a 67 GMC. I sanded the "sliding" area down and greased it. Seems to be working now. $25 shipped to lower 48

fade94 · 09-12-2005, 02:21 PM

Hopefully somone else can answer. I don't have that cab anymore and I don't know if it will bolt up to the 69-72 cab. If I remember right, it either bolted to the bottom of the dash, or to a bracket under/behind the dash. Sorry I couldn't give more info. I'm sure a mounting plate could be made to mount it wherever you need to put it.

fade94 · 09-12-2005, 02:35 PM

That may be where it goes. My 70 was missing that plate when I got it. I have since put one on off of a 69. This is the plate that has the rubber bumpers for the pedals to rest against. That sounds like it's where this would mount.

fade94 · 09-12-2005, 09:25 PM

bump

fade94 · 09-13-2005, 08:11 AM

Make me an offer.

09-12-2005, 02:03 PM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	67 68 E-brake handle. Came off of a 67 GMC. I sanded the "sliding" area down and greased it. Seems to be working now. $25 shipped to lower 48 Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

09-12-2005, 02:21 PM	#2
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Hopefully somone else can answer. I don't have that cab anymore and I don't know if it will bolt up to the 69-72 cab. If I remember right, it either bolted to the bottom of the dash, or to a bracket under/behind the dash. Sorry I couldn't give more info. I'm sure a mounting plate could be made to mount it wherever you need to put it. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

09-12-2005, 02:35 PM	#3
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	That may be where it goes. My 70 was missing that plate when I got it. I have since put one on off of a 69. This is the plate that has the rubber bumpers for the pedals to rest against. That sounds like it's where this would mount. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

09-12-2005, 09:25 PM	#4
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	bump __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

09-13-2005, 08:11 AM	#5
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Make me an offer. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.