looking for board type headliner for burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmmm229 · 08-08-2005, 01:35 AM

does anyone know where to find one of these? it is the four piece tan board type with small holes

burbman69 · 08-08-2005, 10:01 AM

I have seen them advertised at www.dashcaps.com.

Brewski* · 08-08-2005, 10:32 AM

I just ordered one from here:
http://www.americanclassic.com/asp/d...to&exyear=1972

71sub · 08-08-2005, 08:02 PM

Do you have a pic of this setup ? Any more information besides it being a "custom" conversion kit for our vehicles ?

I've got mine at the upholster, right now -- and don'e know what to do to update / upgrade the headliner.

Thanks

Ev

jmmm229 · 08-08-2005, 08:17 PM

mine is made of pegboard material and is divided into four sections across from front to back, it looks factory, but im not sure. the only thing about this truck that i am aware of not being stock are the letters on the doors and hood saying "volunteer fire dept." and "ambulance",everything is pretty stock, so i think it is factory. neither of those links have what i do

**uncle** · 08-08-2005, 09:11 PM

Something I found out last week. Only the front and rear pieces of my headliner actually had holes. Looks like the other pieces had little dots painted on them. It was the original headliner. My burb is a 72.

Brewski* · 08-09-2005, 08:59 AM

As soon as the kit shows I will take pix of it.

71sub · 08-24-2005, 07:12 PM

Has it come in yet ? Just curious on how it looks.

Ev

Brewski* · 08-25-2005, 09:16 AM

Still has not showed. It says 2-4 weeks for delivery. I am going to check with them today to see what is up.

Brewski* · 08-31-2005, 03:34 PM

Showed yesterday. I can say that it looks nice but not a hardboard type like the original. It is cloth that is sewn together where the bows are. I am not too impressed by the kit. It contains bows that are aluminum but there are no end caps. I may spray glue this to a thin piece of thermo foam before installing

4x4Poet · 09-01-2005, 03:37 AM

Brewski, you might first install Dynamat's Hoodliner or Dynamat Extreme to the roof. Just an idea I'm pondering for one of my burbs to keep it both cooler and quieter. Don't ask me how well cloth headliners stick to either product.

**BIG ORANGE** · 09-04-2005, 10:38 PM

Save your self some cash and go to lowes and buy the 1/8 " thick fiberglass bathroom wall board,it's textured it's white and its thin enough that it bends for the curves in the roofline. I put it in Big Orange and she won alot of shows and 3 best interior awards!!!!!!!!!!!
I did put the sound deadner on 1st. There's alot of members that have seen my burb. I sold it afew years back at Good Guys at Lowes Speedway for BIG BUCKS!!!!!!

Brewski* · 09-08-2005, 04:58 PM

Sending this product back. I will loose money doing it unless someone wants it. I paid 120.00 and 41.00 shipping. Will ship to your door for 110.00. That is what I will get back. It is nice but not hard board like I want. I can take pix if someone is interested. Really not bad for 110.00.
Bruce

4x4Poet · 09-09-2005, 01:35 AM

The pics would be nice since I have never seen an aftermarket burb headliner. I may need to purchase aftermarket for one of my burbs since I have three burbs with only two headliner'd. No dough for a purchase, though.

Don't put yourself out for just me.

bigstew · 09-12-2005, 08:09 PM

i have a really good headliner in my 69. i would sell but would need info on how to take it out. i will find my thread and respond to it. it will be from "bigstew"

bigstew · 09-12-2005, 08:19 PM

the headliner is in the "trucks for sale" 67-72 look for 69 burb for sale in kansas.

olblue60@aol.com · 09-14-2005, 07:34 AM

I would be interested in the headliner "Big Stew" , if you find a way to remove it. I would like everything, even the edge channel and screws. Please let me know.

John

olblue60@aol.com · 09-14-2005, 07:46 AM

I would be interested in the headliner "Big Stew" , if you find a way to remove it. I would like everything, even the edge channel and screws. Please let me know.

John

earl87gta · 09-17-2005, 02:55 AM

Brewski did you get any pics of the kit before you sent it back? i would like to see what it looks like im planning a burb project and im looking for interior ideas.

08-08-2005, 01:35 AM	#1
jmmm229 Registered User Join Date: Jul 2005 Location: victoria texas Posts: 114	looking for board type headliner for burb does anyone know where to find one of these? it is the four piece tan board type with small holes __________________ 72 GMC Suburban (former ambulance), soon to be set atop a 2009 SIERRA K2500 chassis w/6.0L&4L80E

08-08-2005, 10:01 AM	#2
burbman69 Registered User Join Date: Feb 2005 Location: MOORESVILLE,NC Posts: 8	Suburban headliners I have seen them advertised at www.dashcaps.com. __________________ If it's worth doing it's worth overdoing! 1969 1/2 ton Suburban 1970 C/20 NEW PROJECT!

08-08-2005, 08:02 PM	#4
71sub Registered User Join Date: May 2002 Location: Stockton, CA Posts: 169	Do you have a pic of this setup ? Any more information besides it being a "custom" conversion kit for our vehicles ? I've got mine at the upholster, right now -- and don'e know what to do to update / upgrade the headliner. Thanks Ev __________________ 71 C/10 : 350 / 700r4 ; Ford 9" posi 3.50 with 31x10.5 rear tires, single drive shaft, C-notch, 2.5" drop spindles, keyless entry 71 Suburban 350/350 -- caddy tail lights, keyless entry, late model seats, billet Autometer instrument cluster 70 Ford Torino -- 351W (balanced & blueprinted ), C4, VDO gauges

08-08-2005, 08:17 PM	#5
jmmm229 Registered User Join Date: Jul 2005 Location: victoria texas Posts: 114	mine is made of pegboard material and is divided into four sections across from front to back, it looks factory, but im not sure. the only thing about this truck that i am aware of not being stock are the letters on the doors and hood saying "volunteer fire dept." and "ambulance",everything is pretty stock, so i think it is factory. neither of those links have what i do __________________ 72 GMC Suburban (former ambulance), soon to be set atop a 2009 SIERRA K2500 chassis w/6.0L&4L80E

08-08-2005, 09:11 PM	#6
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Headliner Something I found out last week. Only the front and rear pieces of my headliner actually had holes. Looks like the other pieces had little dots painted on them. It was the original headliner. My burb is a 72. Last edited by uncle; 08-08-2005 at 09:11 PM.

08-08-2005, 10:32 AM	#3
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	I just ordered one from here: http://www.americanclassic.com/asp/d...to&exyear=1972

08-09-2005, 08:59 AM	#7
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	As soon as the kit shows I will take pix of it.

08-24-2005, 07:12 PM	#8
71sub Registered User Join Date: May 2002 Location: Stockton, CA Posts: 169	Has it come in yet ? Just curious on how it looks. Ev __________________ 71 C/10 : 350 / 700r4 ; Ford 9" posi 3.50 with 31x10.5 rear tires, single drive shaft, C-notch, 2.5" drop spindles, keyless entry 71 Suburban 350/350 -- caddy tail lights, keyless entry, late model seats, billet Autometer instrument cluster 70 Ford Torino -- 351W (balanced & blueprinted ), C4, VDO gauges

08-25-2005, 09:16 AM	#9
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	Still has not showed. It says 2-4 weeks for delivery. I am going to check with them today to see what is up.

08-31-2005, 03:34 PM	#10
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	Showed yesterday. I can say that it looks nice but not a hardboard type like the original. It is cloth that is sewn together where the bows are. I am not too impressed by the kit. It contains bows that are aluminum but there are no end caps. I may spray glue this to a thin piece of thermo foam before installing

09-01-2005, 03:37 AM	#11
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	Brewski, you might first install Dynamat's Hoodliner or Dynamat Extreme to the roof. Just an idea I'm pondering for one of my burbs to keep it both cooler and quieter. Don't ask me how well cloth headliners stick to either product. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup. Last edited by 4x4Poet; 09-01-2005 at 03:38 AM.

09-04-2005, 10:38 PM	#12
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Save your self some cash and go to lowes and buy the 1/8 " thick fiberglass bathroom wall board,it's textured it's white and its thin enough that it bends for the curves in the roofline. I put it in Big Orange and she won alot of shows and 3 best interior awards!!!!!!!!!!! I did put the sound deadner on 1st. There's alot of members that have seen my burb. I sold it afew years back at Good Guys at Lowes Speedway for BIG BUCKS!!!!!! __________________ Things happen for a reason!

09-08-2005, 04:58 PM	#13
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	Sending this product back. I will loose money doing it unless someone wants it. I paid 120.00 and 41.00 shipping. Will ship to your door for 110.00. That is what I will get back. It is nice but not hard board like I want. I can take pix if someone is interested. Really not bad for 110.00. Bruce

09-09-2005, 01:35 AM	#14
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	The pics would be nice since I have never seen an aftermarket burb headliner. I may need to purchase aftermarket for one of my burbs since I have three burbs with only two headliner'd. No dough for a purchase, though. Don't put yourself out for just me. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

09-12-2005, 08:09 PM	#15
bigstew Registered User Join Date: Dec 2004 Posts: 112	i have a really good headliner in my 69. i would sell but would need info on how to take it out. i will find my thread and respond to it. it will be from "bigstew"



Register or Log In To remove these advertisements.

09-12-2005, 08:19 PM	#16
bigstew Registered User Join Date: Dec 2004 Posts: 112	the headliner is in the "trucks for sale" 67-72 look for 69 burb for sale in kansas.

09-14-2005, 07:34 AM	#17
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	I would be interested in the headliner "Big Stew" , if you find a way to remove it. I would like everything, even the edge channel and screws. Please let me know. John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

09-14-2005, 07:46 AM	#18
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	I would be interested in the headliner "Big Stew" , if you find a way to remove it. I would like everything, even the edge channel and screws. Please let me know. John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

09-17-2005, 02:55 AM	#19
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Brewski did you get any pics of the kit before you sent it back? i would like to see what it looks like im planning a burb project and im looking for interior ideas. __________________ Earl 68 2500 4x4 GMC Burb

Register or Log In To remove these advertisements.