Late model seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68Stepbed · 09-10-2005, 04:38 PM

Any body got pics of 99 or newer seats in a 67-72? Any info or advice on installation would be good also. There was an article in Classic Trucks a while back, but I can't find that issue.

I'm considering buying a set and would like some info.

weasel29gm · 09-11-2005, 12:22 AM

No pics,but one of the best swaps you can do to a 67-72.

Bill72BB · 09-11-2005, 01:58 AM

98 Chevy 60/40

**BOSS** · 09-11-2005, 09:20 AM

I will try to get pics later but i have 2001 dodge seat in mine and probably one of the best swaps you can make.

TP from Cntl PA · 09-11-2005, 09:29 AM

I put some late model seats in mine. Worked nice. I just modified the center jump seat mount some(So it would sit a tad lower than the other two so my clip boards and other junk wouldn't slide around), the other two we just drilled holes in the floor and backed the underside with 3" washers I made so they couldn't pull through the floor. Worked great and they are sure comfy.

See them here

Frizzle Fry · 09-11-2005, 12:41 PM

1999 Dodge Intrepid Leather/Power:

Derrickbwg · 09-11-2005, 12:55 PM

Those intrepid seats look good. I've had my eye on some 300m seats, chrysler seats just look good imo. Did you just drill holes to make them fit or did you make some type of adapter mount?

68Stepbed · 09-13-2005, 06:19 AM

ttt

5150 · 09-13-2005, 09:43 AM

Hey Matt,

When you say 99 and newer I'm assuming you mean Chevrolet Truck with the integrated seatbelts. Here's a pic of mine when they were just sitting in the cab. I actually just go done bolting them down yesterday. I put them in the cab and straightened them out and marked the holes and drilled. Got some 3 inch grade 8 bolts, washers, lock washers, and nuts. I had one of the fabricating shops here in town give me some steel that I put under the cab and marked and drilled so the bolts would slide through and bolted them down. It sounds easy and probably is for someone with a brain(not me). I kept having to burr out the holes in the steel because i was off.

One thing to think of because I know you are a big guy(me too, except you have height) is to collapse the steering shaft to give you several more inches.

I'll try to get some pics of mine this week. I'm trying to get it done for the local show here on Saturday so I'll have some good pics by this weekend.

Frizzle Fry · 09-13-2005, 11:21 AM

Quote:

Originally Posted by Derrickbwg

Those intrepid seats look good. I've had my eye on some 300m seats, chrysler seats just look good imo. Did you just drill holes to make them fit or did you make some type of adapter mount?

Drilled holes for the rear mounts and used some uni-strut 90 degree brackets on the front (drilled holes there too). Used some 3/8" flat stock under the floor as big washers.

68Stepbed · 09-15-2005, 02:02 PM

Thanks Brian(sp?). That's what I was looking for.

Did you have to modify the middle jump seat brackets? I know they need to be ground off a little on th 60-66 models.

Matt

5150 · 09-15-2005, 05:36 PM

Yes, I got the sawsall out and cut off the back corner of both sides. You'll know which side to cut off when you place them down to mark them.

I'll try to get you a pic this weekend of the finished product.

Bryan

skokie · 09-15-2005, 06:58 PM

Yellow69 can you post up the pics of the brackets for those seats?

BowTieMan · 09-15-2005, 10:24 PM

[QUOTE=yellow69]Hey Matt,

One thing to think of because I know you are a big guy(me too, except you have height) is to collapse the steering shaft to give you several more inches.

[QUOTE]

How do you collapse the steering shaft?

*72CSTC5* · 09-15-2005, 10:29 PM

Yellow69 you better get to "Overhaulin" it looks like it is going to be a thrash to the finish. Good luck and we are waiting for the pics.

68Stepbed · 09-15-2005, 11:47 PM

What are you trying to say, Bryan? Just 'cause I'm 6'4"-300 doesn't mean anything.

j/k I'll have to try that, but with my tilt column, I can only go about 2" tops before the bell hits the guage panel. Do you think that will be enough?

I have a '92 Cheyenne bench now that sat me closer to the wheel than the stock bench. It's not too bad for now. Do you think the newer seats will move me even closer?

I found a set of seats, but they're like an hour and a half away from where I live and work. Kind-of hard to go pick em up during a lunch break. I hope to get them Saturday. Are they hard to find there? I've been looking for about two weeks before I finally found these guys.

I can't wait to get 'em!!!

djracer · 09-16-2005, 12:26 AM

68 stepbed

How much are you having to pay for them? leather or cloth? does the center fold down? Some do Some Don't! I have a set I might sell!

Kevin

68Stepbed · 09-16-2005, 08:20 AM

djracer, The salvage yard is asking 250 for them. There is a guy locally that sells them for 400. He just buys them from junkyards and resells them at a profit. The ones I'm getting are gray velour

5150 · 09-16-2005, 12:23 PM

I'll post pics on Saturday from my show.

Bowtie Man-Go to the FAQ board and there's a thread there about How to Install a Tilt. In that thread it shows how to collapse the shaft. I could have NEVER got into my truck if I didn't do this, especially with these new seats.

Bryan

70chevyfreak · 09-16-2005, 09:52 PM

I Put A Set Of Buckets With Fold Dowm Jump Seat Out Of A 04 Silverado In My 70.best Thing I Ever Did.they Have Integrated Seat Belts And Way More Comfort That Original Bench Or Buckets.it Seems All Newer Seats Set Out Farther So You Will Have To Collapse The Steering Shaft And Slide Your Column In Farther For More Room,easy Task. I Installed A Van Tilt And Collapsed The Shaft And Now I Could Get King Kong In There.the Pictures I Have Are To Big For This Site Or I Would Post Them.send Me Your Email And I Will Send Them If You Want.
Curtis

sixty8c10 · 09-17-2005, 03:41 PM

chevyfreak send me pics please- chilly_002@yahoo.com

5150 · 09-17-2005, 05:38 PM

Matt,

I put a few pics of the seats in a new thread on the 67-72 Message Board:

http://67-72chevytrucks.com/vboard/s...13#post1409213

09-10-2005, 04:38 PM	#1
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Late model seats Any body got pics of 99 or newer seats in a 67-72? Any info or advice on installation would be good also. There was an article in Classic Trucks a while back, but I can't find that issue. I'm considering buying a set and would like some info. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

09-11-2005, 12:22 AM	#2
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,096	No pics,but one of the best swaps you can do to a 67-72. __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

09-11-2005, 01:58 AM	#3
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	98 Chevy 60/40 Attached Images __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

09-11-2005, 09:20 AM	#4
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	I will try to get pics later but i have 2001 dodge seat in mine and probably one of the best swaps you can make. __________________ Support our site Norwood Survivor

09-11-2005, 09:29 AM	#5
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	I put some late model seats in mine. Worked nice. I just modified the center jump seat mount some(So it would sit a tad lower than the other two so my clip boards and other junk wouldn't slide around), the other two we just drilled holes in the floor and backed the underside with 3" washers I made so they couldn't pull through the floor. Worked great and they are sure comfy. See them here __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

09-11-2005, 12:41 PM	#6
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	1999 Dodge Intrepid Leather/Power:

09-11-2005, 12:55 PM	#7
Derrickbwg Registered User Join Date: Sep 2005 Location: Lexington KY Posts: 64	Those intrepid seats look good. I've had my eye on some 300m seats, chrysler seats just look good imo. Did you just drill holes to make them fit or did you make some type of adapter mount?

09-13-2005, 06:19 AM	#8
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	ttt __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

09-13-2005, 09:43 AM	#9
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Hey Matt, When you say 99 and newer I'm assuming you mean Chevrolet Truck with the integrated seatbelts. Here's a pic of mine when they were just sitting in the cab. I actually just go done bolting them down yesterday. I put them in the cab and straightened them out and marked the holes and drilled. Got some 3 inch grade 8 bolts, washers, lock washers, and nuts. I had one of the fabricating shops here in town give me some steel that I put under the cab and marked and drilled so the bolts would slide through and bolted them down. It sounds easy and probably is for someone with a brain(not me). I kept having to burr out the holes in the steel because i was off. One thing to think of because I know you are a big guy(me too, except you have height) is to collapse the steering shaft to give you several more inches. I'll try to get some pics of mine this week. I'm trying to get it done for the local show here on Saturday so I'll have some good pics by this weekend. Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-15-2005, 02:02 PM	#11
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Thanks Brian(sp?). That's what I was looking for. Did you have to modify the middle jump seat brackets? I know they need to be ground off a little on th 60-66 models. Matt __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

09-15-2005, 05:36 PM	#12
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Yes, I got the sawsall out and cut off the back corner of both sides. You'll know which side to cut off when you place them down to mark them. I'll try to get you a pic this weekend of the finished product. Bryan __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-15-2005, 06:58 PM	#13
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	Yellow69 can you post up the pics of the brackets for those seats? __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

09-15-2005, 10:24 PM	#14
BowTieMan Registered User Join Date: Dec 2003 Location: Glendale Arizona Posts: 747	[QUOTE=yellow69]Hey Matt, One thing to think of because I know you are a big guy(me too, except you have height) is to collapse the steering shaft to give you several more inches. [QUOTE] How do you collapse the steering shaft? __________________ "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

09-15-2005, 10:29 PM	#15
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,522	Yellow69 you better get to "Overhaulin" it looks like it is going to be a thrash to the finish. Good luck and we are waiting for the pics.

09-15-2005, 11:47 PM	#16
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	What are you trying to say, Bryan? Just 'cause I'm 6'4"-300 doesn't mean anything. j/k I'll have to try that, but with my tilt column, I can only go about 2" tops before the bell hits the guage panel. Do you think that will be enough? I have a '92 Cheyenne bench now that sat me closer to the wheel than the stock bench. It's not too bad for now. Do you think the newer seats will move me even closer? I found a set of seats, but they're like an hour and a half away from where I live and work. Kind-of hard to go pick em up during a lunch break. I hope to get them Saturday. Are they hard to find there? I've been looking for about two weeks before I finally found these guys. I can't wait to get 'em!!! __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system



Register or Log In To remove these advertisements.

09-16-2005, 12:26 AM	#17
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	68 stepbed How much are you having to pay for them? leather or cloth? does the center fold down? Some do Some Don't! I have a set I might sell! Kevin __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-16-2005, 08:20 AM	#18
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	djracer, The salvage yard is asking 250 for them. There is a guy locally that sells them for 400. He just buys them from junkyards and resells them at a profit. The ones I'm getting are gray velour __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

09-16-2005, 12:23 PM	#19
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	I'll post pics on Saturday from my show. Bowtie Man-Go to the FAQ board and there's a thread there about How to Install a Tilt. In that thread it shows how to collapse the shaft. I could have NEVER got into my truck if I didn't do this, especially with these new seats. Bryan __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

09-16-2005, 09:52 PM	#20
70chevyfreak Registered User Join Date: Feb 2005 Location: Holt, Missouri. Near KC Posts: 64	I Put A Set Of Buckets With Fold Dowm Jump Seat Out Of A 04 Silverado In My 70.best Thing I Ever Did.they Have Integrated Seat Belts And Way More Comfort That Original Bench Or Buckets.it Seems All Newer Seats Set Out Farther So You Will Have To Collapse The Steering Shaft And Slide Your Column In Farther For More Room,easy Task. I Installed A Van Tilt And Collapsed The Shaft And Now I Could Get King Kong In There.the Pictures I Have Are To Big For This Site Or I Would Post Them.send Me Your Email And I Will Send Them If You Want. Curtis

09-17-2005, 03:41 PM	#21
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	chevyfreak send me pics please- chilly_002@yahoo.com __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

09-17-2005, 05:38 PM	#22
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Matt, I put a few pics of the seats in a new thread on the 67-72 Message Board: http://67-72chevytrucks.com/vboard/s...13#post1409213 __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

Register or Log In To remove these advertisements.