Wanted: 71-2 3/4 ton front brake parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oteixeira · 09-12-2005, 05:22 PM

Hi all,

I figured I would give this a try as a wanted thead as I have had no luck trying to find a set close to me. I need the 8 lug disk setup (w/ spindles would be the best bet) off of a 3/4 ton 71-72 truck. I am switching to diesel and a hydroboost so disks in the front are the way to go. Please let me know if you have these somewhere reasonably close (shipping wise, or I can pick up) to North Carolina.

Thanks in advance,

Orlando

RicksTrucks · 09-12-2005, 07:11 PM

I have some, but probably too far

*72longbed* · 09-12-2005, 07:53 PM

I have a pair of spindles off my 71 K20 that could use some cleaning up. Still very good condition on the bearing surfaces. Will sell them for $40.00 plus shipping from PA.

72longbed

oteixeira · 09-13-2005, 02:47 PM

bump...

72, thanks but I was wanting the whole thing spindles out, not just spindles.

Orlando

72 CustomCamper · 09-13-2005, 08:06 PM

2wd or 4x4? Sounds like the ones that 72longbed has are for a 4x4...

Chuck

oteixeira · 09-14-2005, 10:32 AM

Good point. This is a 2wd rig.

Orlando

et268 · 09-17-2005, 04:42 PM

I just wanted to let you know that you can use 3/4 ton parts from 71 to 87. I just got a complete front crossmember with all suspension,steering and brakes from an 83 c-20 and it bolted in my 69 c-20.I only had to drill 2 holes on each side.

cadiac · 09-18-2005, 11:54 AM

I've got a pair of spindles with rotors from a 71. $50 but far away from you.

09-12-2005, 05:22 PM	#1
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Wanted: 71-2 3/4 ton front brake parts Hi all, I figured I would give this a try as a wanted thead as I have had no luck trying to find a set close to me. I need the 8 lug disk setup (w/ spindles would be the best bet) off of a 3/4 ton 71-72 truck. I am switching to diesel and a hydroboost so disks in the front are the way to go. Please let me know if you have these somewhere reasonably close (shipping wise, or I can pick up) to North Carolina. Thanks in advance, Orlando

09-12-2005, 07:11 PM	#2
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	I have some, but probably too far __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

09-13-2005, 02:47 PM	#4
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	^ bump... 72, thanks but I was wanting the whole thing spindles out, not just spindles. Orlando

09-13-2005, 08:06 PM	#5
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	2wd or 4x4? Sounds like the ones that 72longbed has are for a 4x4... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

09-14-2005, 10:32 AM	#6
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	forgot Good point. This is a 2wd rig. Orlando

09-12-2005, 07:53 PM	#3
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	I have a pair of spindles off my 71 K20 that could use some cleaning up. Still very good condition on the bearing surfaces. Will sell them for $40.00 plus shipping from PA. 72longbed

09-17-2005, 04:42 PM	#7
et268 Registered User Join Date: Jul 2005 Location: Maryland Posts: 1	I just wanted to let you know that you can use 3/4 ton parts from 71 to 87. I just got a complete front crossmember with all suspension,steering and brakes from an 83 c-20 and it bolted in my 69 c-20.I only had to drill 2 holes on each side.

09-18-2005, 11:54 AM	#8
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	I've got a pair of spindles with rotors from a 71. $50 but far away from you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.