|
09-18-2005, 11:51 AM
|
#1 |
|
Senior Member
 
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,798
|
66C10 Power Steering
What later model power sterring gear will bolt up to a 66 column shaft? Or how did you complete this task?
thanks |
|
|
|
09-18-2005, 08:29 PM
|
#2 |
|
Registered User
Join Date: Aug 2003
Location: stallings,nc
Posts: 401
|
none will bolt up. you can use the "rez"conversion kit to use a 71-87 power steering box.it requires minor welding.
__________________
1964 c10 short step 1962 econoline van 1989 rs camaro 2006 yamaha vino 125 1975 goldwing |
|
|
|
|
09-19-2005, 01:03 AM
|
#3 |
|
YES_____NO
Join Date: Jul 1999
Location: Somewhere in the vicinity of betelgeuse
Posts: 7,351
|
Brothers sells a kit that requires no welding, just have to drill one extra hold in the frame
 Power sterrung Adapter kit
__________________
 People many not remember what you said or what you did, but they will remember the way you made them feel. - unknown Cause, remember: no matter where you go... there you are. - Buckaroo Banzai 1984 Help support the board |
|
|
|
|
09-19-2005, 08:42 AM
|
#4 |
|
Registered User
Join Date: Mar 2004
Location: Corinth,TX
Posts: 444
|
I believe the welding zenish was reffering to is when you cut the steering column rod....due to the power steering box being longer than the manual box...
|
|
|
|
|
09-19-2005, 10:00 AM
|
#5 |
|
Registered User
Join Date: Aug 2004
Location: Idaho
Posts: 640
|
I believe that Brothers kit and the Rez Engineering are the same thing. Check out www.americanclassic.com, I remember seeing they have pre-made column shafts the right length, so you don't have to cut up yours if you aren't experienced at welding.
|
|
|
|
|
09-19-2005, 02:11 PM
|
#6 |
|
Registered User
Join Date: Dec 2004
Location: wilson oklahoma
Posts: 367
|
or u can swap steering columns i got a 91 sub column in mine no welding.
__________________
65 c10 tore apart 70 c10 305/350th |
|
|
|
|
09-19-2005, 08:22 PM
|
#7 |
|
Senior Member
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,798
|
chevy283 --got any pics----thanks
|
|
|
|
|
09-19-2005, 10:42 PM
|
#8 |
|
Registered User
Join Date: Aug 2005
Location: Pasadena,Tx /Pto Pta DR
Posts: 5,415
|
I never welded anything. I put on the rez eng kit with a mid 85's box and used a stock intermediate shaft (the collapsible type) new rag joint. 68 tilt column
|
|
|
|
|
09-20-2005, 06:18 PM
|
#9 |
|
Registered User
Join Date: Dec 2004
Location: wilson oklahoma
Posts: 367
|
no it looks cool though. Check out this site he used a 80s sub colume. http://geocities.com/vapershing/pickup.html
__________________
65 c10 tore apart 70 c10 305/350th Last edited by chevy283; 09-20-2005 at 06:19 PM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
