Garage clutter...Need to sell it - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Muddytazz · 08-31-2005, 06:20 PM

Quote:

Originally Posted by 74 shorty

How about just headers. How does 120 shipped sound. Have pics???

Headers are pending sale to someone else

The person that they are pending to lives in Texas and shipping there was $42.53. If he doesn't get them, your next in line and I'd go $130 shipped if your still interested then.

74 shorty · 08-31-2005, 09:52 PM

Alright man, I got money ready just say when.

Muddytazz · 09-03-2005, 01:49 PM

ttt one more time

Muddytazz · 09-04-2005, 11:41 PM

Quote:

Originally Posted by 74 shorty

Alright man, I got money ready just say when.

Hey shorty, send me a pm as your next in line for the headers. The other guy backed out.

Muddytazz · 09-12-2005, 10:20 AM

back up again with edit to original post (Headers are back up for sale)

greenhorn male · 09-14-2005, 01:25 AM

What application is the clutch fan for?

Muddytazz · 09-14-2005, 01:26 AM

Quote:

Originally Posted by greenhorn male

What application is the clutch fan for?

Came off a 73 SB400, but will fit any SB or BB.

benscool1 · 09-14-2005, 01:30 AM

Can I get better pics of the valve covers? Mainly the breather holes? Shoot me a PM if you want.

Muddytazz · 09-14-2005, 01:34 AM

Quote:

Originally Posted by benscool1

Can I get better pics of the valve covers? Mainly the breather holes? Shoot me a PM if you want.

There are no breather holes, these are uncut valve covers.

benscool1 · 09-14-2005, 01:40 AM

Quote:

Originally Posted by Muddytazz

the previous owner put breather holes on the carb side sides of the covers as there is no holes cut in the tops...$40(what I paid)

This says there are holes...?

greenhorn male · 09-14-2005, 01:55 AM

Could you get some measurements and pictures. What would shipping be to 94565?Thanks!

Muddytazz · 09-14-2005, 09:19 AM

Quote:

Originally Posted by benscool1

This says there are holes...?

Oooops my bad, I forgot about those side breather holes. Yes, I'll get you some better pics of the holes today.

Muddytazz · 09-14-2005, 09:21 AM

Quote:

Originally Posted by greenhorn male

Could you get some measurements and pictures. What would shipping be to 94565?Thanks!

I'll get you pics and measurements today....shipping would be $22

Muddytazz · 09-14-2005, 06:34 PM

Quote:

Originally Posted by benscool1

This says there are holes...?

Muddytazz · 09-14-2005, 06:37 PM

Quote:

Originally Posted by greenhorn male

Could you get some measurements and pictures. What would shipping be to 94565?Thanks!

benscool1 · 09-14-2005, 09:53 PM

Will that hurt anything having those holes there? Won't it leak some oil and splash it round all over my carb?

Muddytazz · 09-14-2005, 10:56 PM

Quote:

Originally Posted by benscool1

Will that hurt anything having those holes there? Won't it leak some oil and splash it round all over my carb?

I asked the person I got it from off ebay and he said that he had those 5.5" x 2" oval air breathers mounted over those holes.

greenhorn male · 09-15-2005, 03:56 PM

Muddy...Thanks for all the trouble in getting the pics. Estimating your measurements and a little calculation, that seems to be an 18" dia. fan. It seems like I would need somewhere around a 20" fan for my c20 Sub w/ A/C and a 454, but I have nothing to compare it to at the moment because the prev. owner installed a flex fan and spacer which is around 18" and I have plenty of room left in the shroud. I've seen 454 clutch fans on ebay with 7 blades (no measurement, or exact application mentioned). My plan was to buy a new clutch fan assembly but online parts stores seem to only carry a new clutch or a flexfan blade so my next option is to buy a used clutch fan blade and a new clutch. Anyway, what I need to do is find someone with the same application first to make sure I know what I exactly need. I might post a question in the message board, if I can't find someone locally. If anyone else wants fan go ahead and offer it to them.

Muddytazz · 09-15-2005, 05:26 PM

Quote:

Originally Posted by greenhorn male

Muddy...Thanks for all the trouble in getting the pics. Estimating your measurements and a little calculation, that seems to be an 18" dia. fan. It seems like I would need somewhere around a 20" fan for my c20 Sub w/ A/C and a 454, but I have nothing to compare it to at the moment because the prev. owner installed a flex fan and spacer which is around 18" and I have plenty of room left in the shroud. I've seen 454 clutch fans on ebay with 7 blades (no measurement, or exact application mentioned). My plan was to buy a new clutch fan assembly but online parts stores seem to only carry a new clutch or a flexfan blade so my next option is to buy a used clutch fan blade and a new clutch. Anyway, what I need to do is find someone with the same application first to make sure I know what I exactly need. I might post a question in the message board, if I can't find someone locally. If anyone else wants fan go ahead and offer it to them.

If you look at the second pic, that 19.5" measurement is the overall fan diameter.

greenhorn male · 09-16-2005, 04:01 PM

Muddy...I was able to find a source of a new clutch type fan blades that fit my exact application from a local parts store. They also have the matching clutch in stock. I was planning to use a new clutch anyway even if I got a used fan. So, I won't be needing yours anymore if they could get the blades from the supplier and it is correct. If it ends up being another flex fan what do you want shipped for the fan without the clutch.

Muddytazz · 09-16-2005, 04:07 PM

Quote:

Originally Posted by greenhorn male

Muddy...I was able to find a source of a new clutch type fan blades that fit my exact application from a local parts store. They also have the matching clutch in stock. I was planning to use a new clutch anyway even if I got a used fan. So, I won't be needing yours anymore if they could get the blades from the supplier and it is correct. If it ends up being another flex fan what do you want shipped for the fan without the clutch.

I'd go $30 shipped

greenhorn male · 09-21-2005, 03:31 PM

My new fan arrived and it's not a flex fan and it mates up to the new clutch. That pasrt good, but the box says not to use with anything larger than a 4.1 engine

I checked their application and it calls for the correct numbers. Their flexfan for a bigblock also said "not for use with engine larger than a 4.1. Neither the clutch or fan came with any hardware, so I have to purchase all the nuts bolts and studs to mount and make sure everything lines up ok.
TTT

09-14-2005, 01:25 AM	#31
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	What application is the clutch fan for? __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

09-14-2005, 01:30 AM	#33
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	Can I get better pics of the valve covers? Mainly the breather holes? Shoot me a PM if you want. __________________ Ben 84 C10 Silverado 14 Silverado Z71

09-14-2005, 01:55 AM	#36
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	Could you get some measurements and pictures. What would shipping be to 94565?Thanks! __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

09-14-2005, 09:53 PM	#41
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	Will that hurt anything having those holes there? Won't it leak some oil and splash it round all over my carb? __________________ Ben 84 C10 Silverado 14 Silverado Z71

09-15-2005, 03:56 PM	#43
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	Muddy...Thanks for all the trouble in getting the pics. Estimating your measurements and a little calculation, that seems to be an 18" dia. fan. It seems like I would need somewhere around a 20" fan for my c20 Sub w/ A/C and a 454, but I have nothing to compare it to at the moment because the prev. owner installed a flex fan and spacer which is around 18" and I have plenty of room left in the shroud. I've seen 454 clutch fans on ebay with 7 blades (no measurement, or exact application mentioned). My plan was to buy a new clutch fan assembly but online parts stores seem to only carry a new clutch or a flexfan blade so my next option is to buy a used clutch fan blade and a new clutch. Anyway, what I need to do is find someone with the same application first to make sure I know what I exactly need. I might post a question in the message board, if I can't find someone locally. If anyone else wants fan go ahead and offer it to them. __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

08-31-2005, 09:52 PM	#27
74 shorty Registered User Join Date: Aug 2005 Location: Bowling Green, Mo Posts: 98	Alright man, I got money ready just say when.

09-03-2005, 01:49 PM	#28
Muddytazz JMR Offroad Join Date: Mar 2003 Location: Oregon Posts: 85	ttt one more time

09-12-2005, 10:20 AM	#30
Muddytazz JMR Offroad Join Date: Mar 2003 Location: Oregon Posts: 85	back up again with edit to original post (Headers are back up for sale)

09-16-2005, 04:01 PM	#45
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	Muddy...I was able to find a source of a new clutch type fan blades that fit my exact application from a local parts store. They also have the matching clutch in stock. I was planning to use a new clutch anyway even if I got a used fan. So, I won't be needing yours anymore if they could get the blades from the supplier and it is correct. If it ends up being another flex fan what do you want shipped for the fan without the clutch. __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays. Last edited by greenhorn male; 09-16-2005 at 04:04 PM.

09-21-2005, 03:31 PM	#47
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	My new fan arrived and it's not a flex fan and it mates up to the new clutch. That pasrt good, but the box says not to use with anything larger than a 4.1 engine I checked their application and it calls for the correct numbers. Their flexfan for a bigblock also said "not for use with engine larger than a 4.1. Neither the clutch or fan came with any hardware, so I have to purchase all the nuts bolts and studs to mount and make sure everything lines up ok. TTT __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.