Widest rear wheel possible? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

twisted racing · 09-09-2005, 09:55 PM

well i really like the bed of your truck mind is lowered 4/6 and did them steelies rims come with the 9.75bs and where do you find them and does anyone have a posi track rear end for a 70 chevy

SCOTI · 09-10-2005, 01:54 AM

Quote:

Originally Posted by twisted racing

well i really like the bed of your truck mind is lowered 4/6 and did them steelies rims come with the 9.75bs and where do you find them and does anyone have a posi track rear end for a 70 chevy

Oddly enough . . .... when I bought those wheels (years ago) it was from a company that was in Oklahoma. I'll try & see if I still have a receipt.

tylermckee · 09-10-2005, 03:25 AM

I have 275's on 15xsomethings under my 72 havent tried to go any bigger, maybe after these tires wear out

Swbman · 09-19-2005, 04:47 PM

My son has 295's on the rear of his 71 SWB, but there is alot of room where he could go BIGGER

LUV2XCLR8 · 09-19-2005, 05:00 PM

On my old 70 I sold, I ran 15 x 8 4wd rally's w/ 295/50/15 bfg's on them,
this was on a stock bed set-up, no tubs, no rubs, looked pretty wicked.

djracer · 09-19-2005, 11:44 PM

I have these for sale the are 15x10's centerlines with 28.5 by 12.5 mickeys they filled my 71 fleet wheel wells quite nicely 250.00 for the pair!

70c10 · 09-20-2005, 12:36 PM

djracer- why can't they be 6 lug?

. They are a nice size for our trucks!

BowTieMan · 09-20-2005, 11:43 PM

Quote:

Originally Posted by djracer

I have these for sale the are 15x10's centerlines with 28.5 by 12.5 mickeys they filled my 71 fleet wheel wells quite nicely 250.00 for the pair!

Was that tubed or all stock? And was it lowered at all? Did they rub?

djracer · 09-20-2005, 11:46 PM

all stock lowered a little and would rub inner fenderwells a little! Not enough to hurt anything.

Kevin

djracer · 09-20-2005, 11:48 PM

Jim we can fix your problem I could box up a couple axles and drums for a nice package deal!

70 longbed · 09-21-2005, 04:18 PM

Not mine, but there was a thread the other day where someone has 31x18.5 15's MT Sportsmans on a 10 " wheel. I looked it up and the tire has 14.7" of tread width. The recommended wheel was 14-16", but he said it was stuffed under there with only the mini tub

70 longbed · 09-21-2005, 11:45 PM

The thread I referred to earlier is in the parts area, "Pro street setup". CCSRCR has edited his post to reflect 15" wide wheels with those 15" wide tires; all with a mini tub.

70 longbed · 09-21-2005, 11:49 PM

DJ is it possible to ship those tires and wheels? I am interested, but need some dimensions and zip code info to do some calculations, or use my zip 85635.

djracer · 09-21-2005, 11:51 PM

70 Longbed
I'll weigh one tomorrow and get you a shipping price!

Kevin

djracer · 09-23-2005, 12:59 AM

70 long bed youv'e got mail!

09-19-2005, 04:47 PM	#29
Swbman Senior Member Join Date: Mar 2004 Location: Tulsa,Oklahoma Posts: 606	My son has 295's on the rear of his 71 SWB, but there is alot of room where he could go BIGGER __________________ 1961 BUICK LESABRE 1968 CHEVELLE SS 396 1969 BUICK RIVIERA GS 1971 2 WHEEL DRIVE BLAZER 1971 4X4 BLAZER 1971 SHORTBED CHEYENNE FLEETSIDE 1971 SHORTBED 4X4 FLEETSIDE ** ...My Ebay

09-19-2005, 05:00 PM	#30
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	On my old 70 I sold, I ran 15 x 8 4wd rally's w/ 295/50/15 bfg's on them, this was on a stock bed set-up, no tubs, no rubs, looked pretty wicked. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-19-2005, 11:44 PM	#31
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	I have these for sale the are 15x10's centerlines with 28.5 by 12.5 mickeys they filled my 71 fleet wheel wells quite nicely 250.00 for the pair! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-20-2005, 12:36 PM	#32
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	djracer- why can't they be 6 lug? . They are a nice size for our trucks! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 09-20-2005 at 12:37 PM.

09-20-2005, 11:46 PM	#34
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	all stock lowered a little and would rub inner fenderwells a little! Not enough to hurt anything. Kevin __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-09-2005, 09:55 PM	#26
twisted racing Registered User Join Date: Jun 2005 Location: Oklahoma City Posts: 6	well i really like the bed of your truck mind is lowered 4/6 and did them steelies rims come with the 9.75bs and where do you find them and does anyone have a posi track rear end for a 70 chevy

09-10-2005, 03:25 AM	#28
tylermckee Registered User Join Date: Apr 2005 Location: anacortes Posts: 75	I have 275's on 15xsomethings under my 72 havent tried to go any bigger, maybe after these tires wear out

09-20-2005, 11:48 PM	#35
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Jim we can fix your problem I could box up a couple axles and drums for a nice package deal! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-21-2005, 04:18 PM	#36
70 longbed Senior Member Join Date: Oct 2002 Location: Sierra Vista, AZ Posts: 489	Not mine, but there was a thread the other day where someone has 31x18.5 15's MT Sportsmans on a 10 " wheel. I looked it up and the tire has 14.7" of tread width. The recommended wheel was 14-16", but he said it was stuffed under there with only the mini tub __________________ Keith 70 CST longbed in progress. Hoping to get it back on the road soon.

09-21-2005, 11:45 PM	#37
70 longbed Senior Member Join Date: Oct 2002 Location: Sierra Vista, AZ Posts: 489	The thread I referred to earlier is in the parts area, "Pro street setup". CCSRCR has edited his post to reflect 15" wide wheels with those 15" wide tires; all with a mini tub. __________________ Keith 70 CST longbed in progress. Hoping to get it back on the road soon.

09-21-2005, 11:49 PM	#38
70 longbed Senior Member Join Date: Oct 2002 Location: Sierra Vista, AZ Posts: 489	DJ is it possible to ship those tires and wheels? I am interested, but need some dimensions and zip code info to do some calculations, or use my zip 85635. __________________ Keith 70 CST longbed in progress. Hoping to get it back on the road soon.

09-21-2005, 11:51 PM	#39
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	70 Longbed I'll weigh one tomorrow and get you a shipping price! Kevin __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-23-2005, 12:59 AM	#40
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	70 long bed youv'e got mail! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.