Pro Street Setup....Trade for Stock setup or ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ccsrcr · 09-20-2005, 10:39 AM

Recently bought this truck, and want to go back to a stock setup so I can bag and lower it more. I am looking to do some sort of trade with the whole setup... IE Rear Axle and wheels/tires. It has a narrowed Ford 9" with 4:11 posi. They rear wheels are 15x10 with 31x18.50x15 Mickey thompson tires. It will bolt into the truck with no frame modifications, but will require wider wheel tubs. It is setup for 5 lug. I want to stay with 5 lug.

I am also open to buying a 5 lug stock rear end (preferably 12 bolt Posi with 3:73 gears)

Email me at ricmikjon@yahoo.com as I dont check my PM's often

*FormerMember* · 09-20-2005, 11:12 AM

email sent.

zorro · 09-20-2005, 11:34 AM

I sent you a PM
Z

bigbluthng · 09-20-2005, 11:38 AM

man i would trade in a hearbeat. i've been thinking of doing the 70 like that.

*FormerMember* · 09-20-2005, 11:42 AM

He did ask for email to him. Although I am not sure why I am saying this, as I want it

ratrod67 · 09-20-2005, 04:48 PM

Add me to the list. E-mailed you.

70c10swb · 09-20-2005, 05:49 PM

man thats what i need

corn · 09-20-2005, 06:03 PM

Id almost bet money that the wheels are at least 12". I ran 12X15's with 16.5X31X15 tires & they were a little wide for the rims. Not that it matters though, sweet ride too BTW...corn

ccsrcr · 09-20-2005, 09:28 PM

Couple of corrections, and clarifications. The rear wheels are 15x15x15. Also I pulled off the centercaps, and the rear wheels are dual drilled, and are currently using the ford bolt pattern, and the fronts are just drilled for Chevy pattern. I attached a few pics.

Thanks for all the offers so far, what I am going to do it look at the offers, and take which one works best. Keep them coming.

If anyone needs any more pics let me know.

*FormerMember* · 09-21-2005, 02:19 AM

So, that's probably a 5 on 5.5" wheel pattern. Count me out.

mkundo · 09-21-2005, 07:45 PM

If all else fails and no one follows thru, I interested if you will ship to Ca.
Thanks MK

GloryHound · 09-22-2005, 10:09 PM

CCSRCR,
I have a coil spring rear, pair of OK trailing arms, pair of coil springs, a short wheel base frame that is bent but has all the correct brackets on it, New poly bushings for the trailing arms, all new bolts for installing everything inclueding shocks, no tracking arm but I do have new stud kit and poly bushings for one, and New coil spring cups. Basically everything for the conversion minus tracking arm, U bolts, and shocks. I would be interested in trading if you can arrange devivery and pick up! Let me know. By the way the rear axle is a 6 bolt and as for wheels I have some that will work, but they are not pretty nor origional wheels.

ccsrcr · 09-23-2005, 10:47 AM

Still looking at offers, but do have a couple that are pretty good. I am going to try and make a decision after this weekend. A few people have asked for a few more pics, so here they are.

Anyone ever shipped parts this big , and if so who did you use ?

GloryHound · 09-24-2005, 12:50 PM

I have alot of other truck parts here if you need or want some spare parts in addition. Everything from switchs and wiring Harness to fenders and hoods.

09-20-2005, 10:39 AM	#1
ccsrcr Registered User Join Date: Jan 2003 Location: Lorton,VA Posts: 201	Pro Street Setup....Trade for Stock setup or ?? Recently bought this truck, and want to go back to a stock setup so I can bag and lower it more. I am looking to do some sort of trade with the whole setup... IE Rear Axle and wheels/tires. It has a narrowed Ford 9" with 4:11 posi. They rear wheels are 15x10 with 31x18.50x15 Mickey thompson tires. It will bolt into the truck with no frame modifications, but will require wider wheel tubs. It is setup for 5 lug. I want to stay with 5 lug. I am also open to buying a 5 lug stock rear end (preferably 12 bolt Posi with 3:73 gears) Email me at ricmikjon@yahoo.com as I dont check my PM's often Attached Images Last edited by ccsrcr; 09-20-2005 at 11:26 AM.

09-20-2005, 11:34 AM	#3
zorro Registered User Join Date: Jun 2005 Location: Atlanta Posts: 14	posi rear for sale I sent you a PM Z

09-20-2005, 11:38 AM	#4
bigbluthng Registered User Join Date: Aug 2003 Location: canyon country, ca, USA Posts: 336	man i would trade in a hearbeat. i've been thinking of doing the 70 like that. __________________

09-20-2005, 05:49 PM	#7
70c10swb no brain no headache Join Date: Jan 2005 Location: Cape Cod MA Posts: 567	man thats what i need __________________ 1996 GMC Sierra z71 1970 SWB 2wd (project)

09-20-2005, 09:28 PM	#9
ccsrcr Registered User Join Date: Jan 2003 Location: Lorton,VA Posts: 201	Couple of corrections, and clarifications. The rear wheels are 15x15x15. Also I pulled off the centercaps, and the rear wheels are dual drilled, and are currently using the ford bolt pattern, and the fronts are just drilled for Chevy pattern. I attached a few pics. Thanks for all the offers so far, what I am going to do it look at the offers, and take which one works best. Keep them coming. If anyone needs any more pics let me know. Attached Images

09-20-2005, 11:12 AM	#2
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	email sent.

09-20-2005, 11:42 AM	#5
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	He did ask for email to him. Although I am not sure why I am saying this, as I want it

09-20-2005, 04:48 PM	#6
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Add me to the list. E-mailed you.

09-20-2005, 06:03 PM	#8
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Id almost bet money that the wheels are at least 12". I ran 12X15's with 16.5X31X15 tires & they were a little wide for the rims. Not that it matters though, sweet ride too BTW...corn

09-21-2005, 02:19 AM	#10
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	So, that's probably a 5 on 5.5" wheel pattern. Count me out.

09-21-2005, 07:45 PM	#11
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	If all else fails and no one follows thru, I interested if you will ship to Ca. Thanks MK

09-22-2005, 10:09 PM	#12
GloryHound Working on a Nova. Join Date: Nov 2002 Location: ## Posts: 506	CCSRCR, I have a coil spring rear, pair of OK trailing arms, pair of coil springs, a short wheel base frame that is bent but has all the correct brackets on it, New poly bushings for the trailing arms, all new bolts for installing everything inclueding shocks, no tracking arm but I do have new stud kit and poly bushings for one, and New coil spring cups. Basically everything for the conversion minus tracking arm, U bolts, and shocks. I would be interested in trading if you can arrange devivery and pick up! Let me know. By the way the rear axle is a 6 bolt and as for wheels I have some that will work, but they are not pretty nor origional wheels.

09-23-2005, 10:47 AM	#13
ccsrcr Registered User Join Date: Jan 2003 Location: Lorton,VA Posts: 201	Still looking at offers, but do have a couple that are pretty good. I am going to try and make a decision after this weekend. A few people have asked for a few more pics, so here they are. Anyone ever shipped parts this big , and if so who did you use ? Attached Images

09-24-2005, 12:50 PM	#14
GloryHound Working on a Nova. Join Date: Nov 2002 Location: ## Posts: 506	I have alot of other truck parts here if you need or want some spare parts in addition. Everything from switchs and wiring Harness to fenders and hoods.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.