one piece front end - The 1947 - Present Chevrolet & GMC Truck Message Board Network

countryboyz71 · 09-10-2005, 05:49 PM

im looking for websites or anything to help with me locateing a one piece fiberglass front end for my 68 swb truck any help is greatly appreciated

LUV2XCLR8 · 09-10-2005, 06:07 PM

http://www.usbody.com/WhereQualityComesFirst.htm

countryboyz71 · 09-10-2005, 06:16 PM

thank you

countryboyz71 · 09-19-2005, 09:55 PM

anyone else know any other sites?

djracer · 09-19-2005, 11:28 PM

street or race application?

sneakysnake · 09-20-2005, 10:13 AM

http://www.vfnfiberglass.com/site.htm

FirstGen · 09-20-2005, 10:32 AM

anyone weighed a stock front clip and figured the weight savings going to fiberglass?
Be interesting to know...

djracer · 09-20-2005, 01:19 PM

vfn only has hoods for our trucks! That's who made my camaro stuff!

countryboyz71 · 09-24-2005, 06:40 PM

im building a street truck

djracer · 09-24-2005, 07:35 PM

you don't want the stuff from creative glassworks in TN their stuff is race weight (very Thin)

cdowns · 09-24-2005, 08:34 PM

hope you have extensive fabrication skills because you'll need them to get a flip front fiberglass to hold up to street use and look good too

not for a novice!!!!

countryboyz71 · 09-25-2005, 12:19 AM

i found a site that had the one piece kits for under a 1000 but cant find it now

68LSS1 · 09-25-2005, 06:27 AM

I've got the US Body and am very happy with it. Like has been stated before, where ever you get it from, it's going to take a lot of work to get them fitted and prepped for paint.

09-10-2005, 05:49 PM	#1
countryboyz71 Registered User Join Date: Aug 2005 Location: doniphan, missouri Posts: 44	one piece front end im looking for websites or anything to help with me locateing a one piece fiberglass front end for my 68 swb truck any help is greatly appreciated

09-10-2005, 06:07 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	http://www.usbody.com/WhereQualityComesFirst.htm __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-19-2005, 11:28 PM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	street or race application? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-20-2005, 10:32 AM	#7
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	anyone weighed a stock front clip and figured the weight savings going to fiberglass? Be interesting to know... __________________ 1968 C10 build in process TT LSA/6L90e/9"

09-20-2005, 01:19 PM	#8
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	vfn only has hoods for our trucks! That's who made my camaro stuff! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-10-2005, 06:16 PM	#3
countryboyz71 Registered User Join Date: Aug 2005 Location: doniphan, missouri Posts: 44	thank you

09-19-2005, 09:55 PM	#4
countryboyz71 Registered User Join Date: Aug 2005 Location: doniphan, missouri Posts: 44	anyone else know any other sites?

09-20-2005, 10:13 AM	#6
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	http://www.vfnfiberglass.com/site.htm

09-24-2005, 06:40 PM	#9
countryboyz71 Registered User Join Date: Aug 2005 Location: doniphan, missouri Posts: 44	im building a street truck

09-24-2005, 07:35 PM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	you don't want the stuff from creative glassworks in TN their stuff is race weight (very Thin) __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-24-2005, 08:34 PM	#11
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	hope you have extensive fabrication skills because you'll need them to get a flip front fiberglass to hold up to street use and look good too not for a novice!!!! __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

09-25-2005, 12:19 AM	#12
countryboyz71 Registered User Join Date: Aug 2005 Location: doniphan, missouri Posts: 44	i found a site that had the one piece kits for under a 1000 but cant find it now

09-25-2005, 06:27 AM	#13
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	I've got the US Body and am very happy with it. Like has been stated before, where ever you get it from, it's going to take a lot of work to get them fitted and prepped for paint. __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.